Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

一种变压器巴伦馈电的超短波紧耦合阵列天线

紧耦合阵列天线(Tightly Coupled Array, TCA)具有超宽带、低剖面、宽角扫描等特点,近年来受到国内外学者的广泛关注。然而,在甚高频(VHF)、特高频(UHF)频段TCA 由于馈电网络设计困难等原因现有的研究报道很少。为了填补这一空白,本文设计并测试了一款变压器巴伦馈电的TCA,利用变压器巴伦解决了单元平衡馈电困难问题,同时采用短路枝节抑制E面共模谐振,采用频率选择表面(FSS)匹配层改善宽角扫描阻抗匹配。实测结果表明,该天线在110~520 MHz 频带内、±40°扫描角范围内电压驻波比<2.5,和仿真结果吻合。     

一种加载铁氧体磁环的高功率宽带巴伦

针对高功率天线的差分馈电和阻抗匹配问题,文中提出了一种基于同轴线结构加载铁氧体磁环的宽 带巴伦模型。双同轴线具有阻抗变换功能和较好的功率承载能力,铁氧体磁环改善了巴伦在低频时的输入匹配和 两个输出端口不平衡度。仿真和实测表明,此巴伦在0. 05~1. 24 GHz 内回波损耗低于-10 dB,去除3. 0 dB 系统插损 后单端插入损耗在1. 5 dB 以内,两端输出的相位不平衡度在5°以内,幅度不平衡度在2%以内。通过分析巴伦的电 磁热损耗场、温度场和应力形变场,验证了巴伦在高功率馈电下的工作性能,结果表明此巴伦在工作频带内能够承 受500 W 的功率。     

一种共面带状线馈电的圆极化双频微带天线

提出一种工作于2.4GHz（圆极化）和5.8GHz（线极化）的双频微带天线,由共面带状线（CPS）馈电。在菱形环中内嵌小方环实现双频工作,菱形环上槽口实现圆极化特性,背面加反射板以提高天线增益。为了实测天线性能和应用于不平衡馈电方式,还设计了CPS至微带线的巴伦。实测结果与仿真结果比较吻合,在2.4GHz与5.8GHz的S11〈-10dB工作带宽分别为33.3%和17.4%,增益分别达到9.05dBi和6.59dBi,2.4GHz频点3dB轴比带宽为15.8%。该天线频带宽、增益高、结构简单、易于集成,可用于无线通信和微波输能系统的整流天线中。     

一种5~6 GHz宽带全集成CMOS低噪声放大器

采用55 nm标准CMOS工艺,设计并流片实现了一种应用于Wi-Fi 6(5 GHz)频段的宽带全集成CMOS低噪声放大器(LNA)芯片,包括源极退化共源共栅放大器、负载Balun及增益切换单元。在该设计中,所有电感均为片上实现;采用Balun负载,实现信号的单端转差分输出;具备高低增益模式,以满足输入信号动态范围要求。测试结果表明,在高增益模式下该放大器的最大电压增益为20.2 dB,最小噪声系数为2.2 dB;在低增益模式下该放大器的最大电压增益为15 dB,最大输入1 dB压缩点为-3.2 dBm。芯片核心面积为0.28 mm²,静态功耗为10.2 mW。     

一种小型化带通滤波微带巴伦设计

提出一种小型化带通滤波微带巴伦的设计。在Marchand巴伦的基础上,使用一个半波长和两个1/4波长传输线作为谐振器,在带通滤波微带巴伦的两个输出端口可以获得相同幅度和相反相位的平衡信号。利用谐振器平行线耦合可以观察到通带两侧存在两个传输零点。对提出的中心工作频率在2.65 GHz的带通滤波微带巴伦进行了实物加工与测试。两个输出端口信号幅度差与相位差分别为±0.4 dB和180°±5°。仿真与测量结果有较好的一致性,验证了本文所提方案的可行性。     

一种应用于WiMAX协议的全集成3.5GHzCMOS功率驱动放大器

A fully integrated CMOS differential power amplifier driver(PAD) is proposed for WiMAX applications. In order to fulfill the differential application requirements,a transmission line transformer is used as the output matching network.A differential inductance constitutes an inter-stage matching network.Meanwhile,an on chip balun realizes input matching as well as single-end to differential conversion.The PAD is fabricated in a 0.13μm RFCMOS process.The chip size is 1.1×1.1 mm~2 with all of the matching network integrated on chip. The saturated power is around 10 dBm and power gain is about 12 dB.     

Wideband LC balun transformer using coupled LC resonators embedded into organic substrate

In this paper, wideband LC balun using coupled LC resonator has been newly designed, simulated, and fabricated. The proposed balun has a novel scheme which consists of two pairs of coupled embedded LC resonators which share one resonator with each other. The coupled resonators are applied to provide a precise phase difference of 180° and an identical magnitude between two balanced ports and DC isolation characteristic with impedance transformation. Furthermore, proposed resonators have relatively small inductance values which can be easily embedded into the organic package substrate. In order to reduce the size of embedded capacitors, BTO composite high dielectric film was applied to increase their capacitance densities. The measured results of fabricated wideband balun exhibited an insertion loss of 1.8 dB, a return loss of 10 dB, a phase imbalance of 0.5°, and magnitude imbalance of 0.7 dB at frequency bandwidth of 700 MHz ranged from 1.8 to 2.5 GHz, respectively. They agreed well with the simulated ones. The fabricated balun has a relatively small volume of 2 mm×3.5 mm×0.66 mm (height).     

低轨道小卫星通信中谐振式四臂螺旋天线的应用研究

谐振式四臂螺旋天线由于不需要参考地、能产生赋形方向图且重量轻、尺寸小,在空间通信中得到广泛的应用.本文从低轨道小卫星通信系统的要求出发,设计了两种实际的谐振式四臂螺旋天线,天线采用了新颖的90°自相移结构及平衡馈电结构.最后采用有限元方法对其辐射特性进行分析,计算结果与测试数据的一致性好.