Single‐Source Precursors For Synthesizing Bifunctional Periodic Mesoporous Organosilicas

A new class of bifunctional periodic mesoporous organosilicas (PMOs) composed of organosilicate building blocks with two different silicon sites have been synthesized from the single‐source bifunctional organosilica precursors tris(triethoxysilylethyl)ethoxysilane and bis(triethoxysilylethyl)diethoxysilane, respectively denoted MT³‐PMO and DT²‐PMO. The synthesis of these PMOs is achieved by the co‐assembly of a triblock‐copolymer Pluronic P123 template with the bifunctional organosilica precursor under acid‐catalyzed and inorganic‐salt‐assisted conditions. After template removal through solvent extraction, the MT³‐PMO and DT²‐PMO so obtained show well‐ordered mesopores and display large pore diameters (6–7 nm) and pore volumes (0.6–0.8 cm³ g^–1) with a narrow pore‐size distribution and high surface areas (700–800 m³ g^–1).     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

用计算模拟方法研究Al_3P_4O_(16)~(3-)计量比的二维层状磷酸铝中的有机胺模板能力

将快速 Monte Carlo方法与分子动力学方法相结合 ,研究了不同种类有机分子在 Al3P4 O3- 1 6 计量比的二维层状磷酸铝形成中的模板能力 .依据主 -客体之间非键相互作用能 (包括范德华能、氢键能和库仑能 ) ,可合理地解释已知实验现象 ,并能有效地预测出适于形成某一特定无机层结构的有机胺模板剂 .通过选择理论预测的有机胺分子作为模板剂 ,成功地合成了二维层状磷酸铝化合物 Al3P4 O1 6 · 1 .5 H3NC6 H1 0 NH3.     

(C2H10N2)[BPO4F2] — Structural Relations between [BPO4F2]2— and [Si2O6]4—

(C₂H₁₀N₂)[BPO₄F₂] — Strukturbeziehungen zwischen [BPO₄F₂]^2— und [Si₂O₆]^4— Colourless crystals of (C₂H₁₀N₂)[BPO₄F₂] were prepared from mixture of ethylendiamine, H₃BO₃, BF₃ · C₂H₅NH₂, H₃PO₄ and HCl under mild hydrothermal conditions (220 °C). The crystal structure was determined by single crystal methods (triclinic, P1¯ (no. 2), a = 451.85(5) pm, b = 710.20(8) pm, c = 1210.2(2) pm, α = 86.08(1)°, β = 88.52(2)°, γ = 71.74(1)°, Z = 2) and contains infinite tetrahedral zweier‐single‐chains {[BPO₄F₂]^2—} which are isoelectronic (48e^—) with the polyanions {[Si₂O₆]^4—} of the pyroxene family.     

A Cyclodextrin Molecular Reactor for the Regioselective Synthesis of 1,5-disubstituted-1,2,3-triazoles

6^A-Deoxy-6^A-propynamido-β-cyclodextrin reacts with 4-tert-butylphenyl azide in aqueous solution, to form the 5-(aminocarbonyl)-substituted triazole in preference to the 4-(aminocarbonyl)-substituted analogue, in a ratio of 25:1. The cyclodextrin moiety templates the reaction through the formation of a host-guest complex of the dipole with the dipolarophile, controlling the regioselectivity of cycloaddition. In a control reaction under similar conditions, with propiolamide instead of the cyclodextrin derivative, 5- and 4-(aminocarbonyl)-1-(4-tert-butylphenyl)-1,2,3-triazole were formed in a ratio of 1:4. As well as reversing the regioselectivity, the cyclodextrin substituent increases the rate of cycloaddition, by at least two orders of magnitude for the reaction to give the 5-substituted cycloadduct. Even the rate of formation of the 4-substituted cycloadduct is increased by a factor of two. Less marked effects are observed with phenyl azide and 4-tert-butylbenzyl azide as dipoles.     

A multifrequency EPR study of poly(PADPA) synthesized with Trametes versicolor laccase from the aniline dimer p-aminodiphenylamine (PADPA) in the presence of anionic vesicles

Poly(PADPA) synthesized with the enzyme Trametes versicolor laccase (TvL) at pH = 3.5 in aqueous solution from the aniline dimer p-aminodiphenylamine (PADPA) was studied by EPR spectrometry at X-band and W-band frequencies. For the synthesis of poly(PADPA), vesicles formed from AOT (sodium bis-(2-ethylhexyl)sulfosuccinate) were used as structure-directing templates, and TvL/O₂ as catalyst and oxidant. The isolated product is abbreviated as “poly(PADPA)-TvL-AOT” to distinguish it from poly(PADPA) obtained by other means. The EPR spectrum of poly(PADPA)-TvL-AOT recorded at room temperature is complex. It can be decomposed into two separate Dyson–type spectral components. Furthermore, the spectra measured at high frequency exhibit a line broadening behavior in comparison to the spectra recorded at low frequency where there is no line broadening. This behavior was used to estimate the effective inter-chain spin exchange interaction for each monitored spectral component. The obtained effective distances between the polymer (or oligomer) chains in both identified components of poly(PADPA)-TvL-AOT can be explained by considering slightly different interactions between the chains and the AOT molecules present in the sample. Additionally, due to different average g tensor values, g_av, of these components, it seems that each spectral component originates from one of two different molecular subunits (or local structural motifs) within the polymer (or oligomer) chains.     

Fabrication of Silicon Inverse Woodpile Photonic Crystals

Silicon inverse woodpile photonic crystals are fabricated for the first time. Our approach, which is based on direct laser writing of polymeric templates and a novel silicon single‐inversion procedure, leads to high‐quality structures with gap/midgap ratios of 14.2 %, centered at a wavelength of 2.5 μm. It is shown that gap/midgap ratios as large as 20.5 %, centered at 1.55 μm, may become possible in the future.     

Selective Crystallization of Organic Semiconductors on Patterned Templates of Carbon Nanotubes

A method of patterning large arrays of organic single crystals is reported. Using single‐walled carbon nanotube (SWNT) bundles as patterned templates, several organic semiconductor materials were successfully patterned, including p‐type pentacene, tetracene, sexiphenylene, and sexithiophene, as well as n‐type tetracyanoquinodimethane (TCNQ). This study suggests that the selective growth of crystals onto patterned carbon nanotubes is most likely due to the coarse topography of the SWNT bundles. Moreover, we observed that the crystals nucleated from SWNT bundles and grew onto SWNT bundles in a conformal fashion. The dependence of the number of crystals on the quantity of SWNT bundles is also discussed. The crystal growth can be directly applied onto transistor source‐drain electrodes and arrays of organic single‐crystal field effect transistors are demonstrated. The results demonstrate the potential of utilizing carbon nanotubes as nucleation templates for patterning a broad range of organic materials for applications in optoelectronics.     

The Large Electrochemical Capacitance of Microporous Doped Carbon Obtained by Using a Zeolite Template

A novel microporous templated carbon material doped with nitrogen is synthesized by using a two‐step nanocasting process using acrylonitrile (AN) and propylene as precursors, and Na–Y zeolite as a scaffold. Liquid‐phase impregnation and in situ polymerization of the nitrogenated precursor inside the nanochannels of the inorganic scaffold, followed by gas‐phase impregnation with propylene, enables pore‐size control and functionality tuning of the resulting carbon material. The material thereby obtained has a narrow pore‐size distribution (PSD), within the micropore range, and a large amount of heteroatoms (i.e., oxygen and nitrogen). In addition, the carbon material inherits the ordered structure of the inorganic host. Such features simultaneously present in the carbon result in it being ideal for use as an electrode in a supercapacitor. Although presenting a moderately developed specific surface area (S_BET = 1680 m² g^–1), the templated carbon material displays a large gravimetric capacitance (340 F g^–1) in aqueous media because of the combined electrochemical activity of the heteroatoms and the accessible porosity. This material can operate at 1.2 V in an aqueous medium with good cycleability—‐beyond 10 000 cycles—and is extremely promising for use in the development of high‐energy‐density supercapacitors.     

不同模板剂合成SAPO-34分子筛的表征与热分解过程研究

采用XRD、SEM、FT IR、TG DTA等表征手段 ,对分别以正磷酸、拟薄水铝石和硅溶胶为磷源、铝源和硅源 ,用五种模板剂合成的SAPO 34分子筛进行了表征 .不同模板剂合成的SAPO 34分子筛在晶粒粒度分布上有相当大的差异 .通过TEAOH Et3 N或者TEAOH Morpholine复合模板剂法可以有效地调节晶粒粒度 .不同模板剂合成的SAPO 34分子筛的红外骨架振动相似 ;而模板剂分子与分子筛骨架的作用方式有区别 .模板剂种类对SAPO 34分子筛骨架热稳定性没有影响 ,但对其热分解的行为有影响