The 2D Rancieite-type manganic acid and its alkali-exchanged derivatives: Part I — Chemical characterization and thermal behavior

The 2D Rancieite type manganic acid was prepared by reduction of KMnO₄ in acidic medium. Its ion exchange behavior allows to prepare alkali derivatives. All compounds were characterized with use of a combination of X-ray diffraction, chemical analyses, TGA, magnetic measurements and spectroscopic techniques. The evolution of their chemical composition versus temperature was studied between 180 and 400 °C. It shows that the dehydration process is partly reversible in these compounds whereas the weak reduction is irreversible. The 2D Rancieite-type manganic acid is readily different from a Birnessite-type phyllomanganate, as shown by several features: the interlayer distance, the ion exchange capacity, the thermal behavior, the interlayer cation content, the manganese average oxidation state, the magnetic behavior and the IR spectrum.     

Thin film substrates from the Raman spectroscopy point of view

We have investigated ten standard single crystal substrates of complex oxides on the account of their applicability in the Raman spectroscopy‐based thin film research. In this study, we suggest a spectra normalization procedure that utilizes a comparison of the substrate's Raman spectra to those of well‐established Raman reference materials. We demonstrate that MgO, LaGaO₃, (LaAlO₃)_0.3(Sr₂AlTaO₆)_0.7 (LSAT), DyScO₃, YAlO₃, and LaAlO₃ can be of potential use for Raman‐based thin film research. At the same time TiO₂ (rutile), NdGaO₃, SrLaAlO₄, and SrTiO₃ single crystals exhibit multiple phonon modes accompanied by strong Raman background that substantially hinder Raman‐based thin film experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

非晶InGaZnO薄膜成分配比对透明性和迁移率的影响

利用固相反应法制备了富铟含量在不同成分配比下的高质量InGaZnO陶瓷靶材,采用脉冲激光沉积法,在基片温度为20 ℃、氧压为1 Pa条件下,在石英玻璃衬底上生长了非晶InGaZnO薄膜,并对薄膜进行X射线衍射、透射吸收光谱、拉曼光谱与霍尔效应测试。通过对InGaZnO薄膜的测试表征,在较低温度条件下,铟含量较高的薄膜样品保持了非晶结构、可见光的高透明性和高电子迁移率,InGaZnO薄膜有望应用于电子器件。     

Studies on the electrochemiluminescent behavior of luminol on indium tin oxide (ITO) glass

The electrochemiluminescence (ECL) of luminol on indium tin oxide (ITO) glass was high even under a low potential around 0.4-0.5 V, which was quite different from other electrodes such as platinum. ITO nanoparticles were synthesized and used in the research on ITO glass in the ECL process. A static interaction between ITO and luminol is confirmed from UV-vis and fluorescence spectra. Then the ECL enhancement can be supposed to originate from the adsorption of luminol on ITO, which facilitated luminol’s oxidization to the excited state, giving out ECL. On the other hand, ITO can catalyze the generation of reactive oxygen species (ROSs), similar to some other nanomaterials, which also favored the ECL enhancement of luminol.     

Bioactivity of SiO2-CaO-P2O5-Na2O glasses containing zinc-iron oxide

Glasses with composition x(ZnO,Fe₂O₃)(65 − x)SiO₂20(CaO,P₂O₅)15Na₂O (6 ≤ x ≤ 21 mol%) were prepared by melt-quenching technique. Bioactivity of the glasses was investigated in vitro by examining apatite formation on the surface of glasses treated in acellular simulated body fluid (SBF) with ion concentrations nearly equal to those in human blood plasma. Formation of bioactive apatite layer on the samples treated in SBF was confirmed by using Fourier transform infrared reflection (FTIR) spectroscopy, grazing incidence X-ray diffraction (GI-XRD) and scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometer. Development of an apatite structure on the surface of the SBF treated glass samples as functions of composition and time could be established using the GI-XRD data. FTIR spectra of the glasses treated in SBF show features at characteristic vibration frequencies of apatite after 1-day of immersion in SBF. SEM observations revealed that the spherical particles formed on the glass surface were made of calcium and phosphorus with the Ca/P molar ratio being close to 1.67, corresponding to the value in crystalline apatite. Increase in bioactivity with increasing zinc-iron oxide content was observed. The results have been used to understand the evolution of the apatite surface layer as a function of glass composition and immersion time in SBF.     

基于荧光共振能量转移的核酸适体传感器研究

基于荧光共振能量转移的原理,以修饰于核酸适体上的FAM作为能量供体,以氧化石墨烯作为能量受体,构建了荧光适体传感器,分别对不同浓度的胰岛素和多巴胺进行检测.结果表明,胰岛素的线性检测范围为0.05~10μmol/L,多巴胺的线性检测范围为1~500μmol/L,当胰岛素和多巴胺检测浓度相同时,胰岛素检测信号远强于多巴胺.对胰岛素和多巴胺分别进行特异性实验,发现该传感器对胰岛素和多巴胺有较强的特异性.说明基于荧光共振能量转移的核酸适体传感器不仅可实现多种物质的微量检测,还具有较强的选择性,在生物和医药检测领域应用前景广阔.     

Electrospinning of complex oxide nanofibers

Electrospinning is a versatile process for drawing fibers of diverse materials including polymers, ceramics, and composites. We demonstrate here its application in the synthesis of complex ceramic oxide materials. The phase formation and morphology of BaTiO₃ nanofibers synthesized via electrospinning is investigated as a function of heat treatment conditions. Fully crystallized BaTiO₃ nanofibers with the perovskite structure are obtained after annealing at 750 °C and show an average grain size of about 30 nm. Tetragonal crystal structure of the fibers is indicated by XRD peak splitting (calculated c/a ratio=1.007), and confirmed by Raman spectroscopy. Furthermore, the advancement in heat treatment of the electrospun fibers yields single crystalline BaTiO₃ nanofibers with 50 nm in diameter and lengths up to 1 μm.     

Study on the recovery of NBTI of ultra-deep sub-micro MOSFETs

Taking the actual operating condition of complementary metal oxide semiconductor (CMOS) circuit into account, conventional direct current (DC) stress study on negative bias temperature instability (NBTI) neglects the detrapping of oxide positive charges and the recovery of interface states under the `low' state of p-channel metal oxide semiconductor field effect transistors (MOSFETs) inverter operation. In this paper we have studied the degradation and recovery of NBTI under alternating stress, and presented a possible recovery mechanism. The three stages of recovery mechanism under positive bias are fast recovery, slow recovery and recovery saturation.     

Adsorption and desorption characteristics of barium oxide at high temperature

Oxygen-selective adsorbents were prepared by two different methods, hydrothermal and sol-gel methods. The adsorption and desorption characteristics of these adsorbents were compared in terms of stability and sorption capacity. The sorbents prepared by the sol-gel method showed better cyclic stability and higher adsorption capacity than that prepared by the hydrothermal method because the sol-gel method entrapped well the barium peroxide.Relaxation time for adsorption ranged from 4 to 9 min depending on the preparation methods and that for desorption was 6 min regardless of the preparation methods. Breakthrough experiment with the sorbent prepared by the sol-gel method was performed. The adsorption breakthrough curves at 600 °C showed two plateau regions. One was at about 3.5%, and the other was 20%. The first plateau region is related to the sharp transition point of the oxygen adsorption isotherm. Though the relaxation time for adsorption was 6 min, the time required from the end of the first plateau to the beginning of the second plateau was just 2 min. During the desorption, a plateau region at 3.5% of oxygen concentration was observed regardless of the desorption flow rate.     

Surface and catalytic properties of doped tin oxide nanoparticles

Mixed oxides composed of Zn-Sn, Ti-Sn and V-Sn were prepared by a co-precipitation method and evaluated as catalysts for methanol oxidation in an ambient fixed-bed reactor. Surface analysis by X-ray photoelectron spectroscopy (XPS) revealed an electronic interaction between dopant and Sn atoms in the oxide structure and showed the formation of surface states associated with the dopants. Oxygen vacancies were present on the Zn-doped oxide, and the oxidation of methanol to carbon oxides was favored. The Ti-doped oxide exhibited a favorable selectivity to dimethyl ether, related to the oxygen anions near Ti centers. Vanadium dopants not only dramatically increased the catalytic activity but also promoted the partial oxidation of methanol to formaldehyde. Results demonstrate that the bridging dopant-O-Sn bond acts as active sites and influences product distribution.