Study on Transient Properties of Levitated Object in Near-FieldAcoustic Levitation

A new approach to the study on the transient properties of the levitated object in near-field acoustic levitation (NFAL) is presented. In this article, the transient response characteristics, including the levitated height of an object with radius of 24 mm and thickness of 5 mm, the radial velocity and pressure difference of gas at the boundary of clearance between the levitated object and radiating surface (squeeze film), is calculated according to several velocity amplitudes of radiating surface. First, the basic equations in fluid areas on Arbitrary Lagrange-Euler (ALE) form are numerically solved by using streamline upwind
petrov galerkin (SUPG) finite elements method. Second, the formed algebraic equations and solid control equations are solved by using synchronous
alternating method to gain the transient messages of the levitated object and gas in the squeeze film. Through theoretical and numerical analyses, it
is found that there is a oscillation time in the transient process and that the response time does not simply increase with the increasing of velocity
amplitudes of radiating surface. More investigations in this paper are helpful for the understanding of the transient properties of levitated
object in NFAL, which are in favor of enhancing stabilities and responsiveness of levitated object.     

两种测试高温超导薄膜微波表面电阻方法的讨论

介绍两种工作在12GHz附近的高温超导薄膜微波表面电阻Rs测试系统,并分析各自的特点.同时简介电子科技大学在提高Rs测试精度上所作的一些改进.     

应用分离涡模型计算斜圆柱孔气膜冷却

分离涡模型(DES,Detached eddy simulation)兼有雷诺时均湍流模型计算量较小和大涡模拟计算精度高的优点。本文利用DES对平板单斜圆柱孔的气膜冷却进行了数值模拟,并将结果同RANS湍流模型的计算结果以及实验数据相比较,表明DES能有效弥补RANS湍流模型在计算三维不均匀非定常湍流场的不足,更接近实际地反映了气膜冷却中的流动和换热的本质规律。     

偶氮聚合物薄膜的全光极化研究

报告了分散红共聚物膜HMMM-DR1,HMMM-DR19和偶氮侧链聚合物膜PCN6和PCN2的合成和制备, 并以HMMM-DR1和PCN6为代表比较研究了这两种具有不同吸收性质材料的全光极化特性,研究了他们的实时极化和弛豫过程,对他们的全光极化性质作了最基本的表征.研究了倍频光吸收对薄膜光极化效率的影响,讨论了偶氮聚合物材料光诱导二阶非线性极化率的效率和倍频光透射率之间的折衷关系,这对实用化的全光器件的研制是至关重要的.实验确证了在PCN6薄膜中实现了准相位匹配.对厚膜中光诱导二阶非线性极化率的弛豫抑制效应作出解释.     

Some optical specificity of ultrathin crystalline films

The changes of optical properties under boundary presence in molecular crystal nanofilm were theoretically investigated in this work. The dispersion law and states of excitons as well as their space distribution along boundary direction have been determined using adjusted Green's function method and also by combined analytical and numerical calculations. On the basis of real and imaginary part of relative permittivity, both absorption and refraction indices were determined, and the influences of boundary parameters on occurrence of a very selective and strictly discrete absorption were analyzed.     

Heterogeneous magnetic and electronic states in Ca1−xLaxMnO3−δ (x⩽0.12) single crystals with electron doping

The magnetic, transport, and optical properties of electron-doped Ca_1−xLa_xMnO_3−δ single crystals with x  ?0.12 were studied. The magnetic measurements show that in single crystals with x=0$x=0$ and 0.05 the G-type AFM phase with weak FM component is realized and in crystals with x=0.10$x=0.10$ and 0.12 the G- and C-type AFM phases coexist. The C-type magnetic structure arises at less concentration of La than in polycrystalline samples as a result of oxygen vacancies being additional source of electrons. Under magnetic transitions in the G- and C-type phases, resistivity and magnetoresistance of the doped single crystals have anomalies. Optical absorption in IR range indicates formation of a charge gap in crystals with x=0.10$x=0.10$ and 0.12 at appearance of the C-AFM and monoclinic phase with orbital/charge ordering. By comparing optical and transport properties, heterogeneous electronic state and its relation with heterogeneous magnetic state are shown.     

Microstructure and optical properties of nitrogen-doped ZnO film

The nitrogen doping of ZnO film deposited by the magnetron sputtering method is subsequently realized by the hydrothermal synthesis method.The nitrogen-doped ZnO film is preferably(002) oriented.With the increase of hexamethylenetetramine(HMT) solution concentration,the average grain size of the film along the 002 direction almost immediately decreases and then monotonously increases,conversely,the lattice strain first increases and then decreases.The structural evolution of the film surface from compact and even to sparse and rough is attributed to the enhanced nitrogen doping content in the hydrothermal process.The transmission and photoluminescence properties of the film are closely related to grain size,lattice strain,and nitrogen-related defect arising from the enhanced nitrogen doping content with HMT concentration increasing.     

Preparation, structures and photoluminescent enhancement effect of PbWO4–TiO2 composite nanofilms

A novel route for preparing PbWO₄–TiO₂ nanofilms on a glass substrate is firstly proposed. The collodion is used as a dispersant and film-forming agent. The nanofilms are characterized through SEM, XRD, TG/DTA, PL and IR, respectively. The results of XRD indicate PbWO₄ particles with tetragonal scheelite structure and TiO₂ particles with Anatase phase, and SEM shows they are well dispersed in the substrate. Compared with nanoparticles, when TiO₂ nanoparticles are added in 5% ratio, the PL intensities at 395 nm of PbWO₄ nanofilms are enhanced obviously. IR spectrum reveals a large absorption band between 750 and 870 cm⁻¹, which is the W–O stretching vibration in WO₄ tetrahedron.     

纳米TiO2∶Zn薄膜电极紫外光电特性研究

采用sol-gel法制备了Zn2+掺杂的锐钛矿相纳米TiO2薄膜电极.通过光电流作用谱和电流-电位（I-U）曲线研〖WTBZ〗究了掺杂不同浓度Zn2+的TiO2薄膜电极的光电特性.由光电流作用谱可知，Zn2+的掺杂可显著影响薄膜电极的光电流大小，且掺杂的最佳浓度与薄膜晶粒尺度有关.在320nm单色光照射下，掺杂浓度（摩尔浓度）为0.1％的薄膜电极光电流最大，与未掺杂的本征薄膜电极相比增幅达40％.I-U曲线表明，光照下，随电极电位由正到负逐渐降低，不同掺杂浓度的TiO2薄膜电极中均出现了阳极电流向阴极电流转换的现象，且Zn2+掺杂浓度可影响电极阳极电流的初始电位.另外，无光照的暗态下，各薄膜在负电位区域观察到了相似的随电位降低而迅速增大的阴极暗电流.     

Experiments and analysis of thin tungsten slice and W/Cu brazing for primary collimator scraper in CSNS/RCS

According to the requirements for the beam collimation system of the rapid cycling synchrotron(RCS)of China Spallation Neutron Source(CSNS),the main structure of a scraper of primary collimator is made by W/Cu brazing,in which the thickness of tungsten slice is 0.17 mm.In order to get the best mechanical properties,the brazing temperature is suggested to be controlled under the recrystallization temperature of tungsten,while the recrystallization temperature is affected directly by the thickness of tungsten.Because of little research and application on the brazing of thin tungsten slice of 0.17 mm and copper,tensile tests are done to get the mechanical properties of tungsten slices which experience different brazing temperatures.In keeping the inner relationships between the mechanical properties and temperature,another experiment is done by using SEM to scan the microstructures including the size and distribution of crystals.Finally we determine the recrystallization temperature of tungsten slice of 0.17 mm,and get the best parameters of W/Cu brazing for scrapers of primary collimator in CSNS/RCS.