Influence of steady background gradients on the accuracy of molecular diffusion anisotropy measurements

Spatial susceptibility variations of body components lead to local gradients of the static magnetic field. Effects of such background gradients on fractional diffusion anisotropy (FA) measurements on whole-body magnetic resonance units operating at 1.5, 3.0 and 7.0 T were analyzed theoretically and experimentally. Analytical expressions were derived for the cases of diffusion occurring in isotropic media and in tissues with cylindrical symmetry (e.g., white matter tracts or skeletal musculature). Typical magnitudes of background gradient strengths were estimated from in vivo and in vitro measurements with B0 field mapping sequences. Additionally, numerical simulations of magnetic field distributions and resulting field gradients were performed considering tissue-air interfaces in simplified geometrical arrangements. For media with isotropic diffusion, both measurements and analytical calculations showed increasing FA inaccuracy with stronger coupling between diffusion-encoding and background gradients. For cylindrical symmetry, FA values were estimated for a standard diffusion tensor imaging protocol in a realistic scenario. At 1 mm distance from a water-air interface, susceptibility-related background gradients amount to approximately 9 mT/m at 7 T and lead to a relative error of the measured FA of up to 48%. The error in the anisotropy assessment rises considerably with increasing field strength and must be taken into account especially for experimental and clinical studies on modern high-field systems.     

Coherent X‐ray diffractive imaging of protein crystals

The technique of coherent X‐ray diffraction imaging (CXDI) has recently shown great promise for the study of inorganic nanocrystals. In this work the CXDI method has been applied to the study of micrometer‐size protein crystals. Finely sampled diffraction patterns of single crystals were measured and iterative phase‐retrieval algorithms were used to reconstruct the two‐dimensional shape of the crystal. The density maps have limited reproducibility because of radiation damage, but show clear evidence for crystal facets. Qualitative analysis of a number of single‐crystal diffraction peaks indicates the presence of inward surface contraction on 2 µm size crystals. A survey of several hundred diffraction patterns yielded a number of examples with dramatic single‐sided streaks, for which a plausible model is constructed.     

Monitoring membrane rafts in colorectal cancer cells by means of correlative fluorescence electron microscopy (CFEM)

Detergent-resistant membrane (DRM) rafts have been shown to play a pivotal role in regulating key cell biological processes, such as signal transduction, cellular transport and cell survival. The fine structure of membrane rafts are studied using various different imaging approaches and the outcomes are largely dependent on the detection methodology applied. All these microscopy techniques which employ light-, laser- and photon-optics, electrons as well as atomic force probing are characterized on their turn by their strengths and limitations for membrane raft identification. This explains in part the diversity of definitions available to describe these peculiar membrane structures. We present herewith an alternative and uncomplicated microscopy tool to study fluorescently labelled DRMs with information at the transmission electron microscopical level of the same cell, enabling us to obtain a snapshot of the morpho-functional relationships between the cell's interior and DRMs. The proposed approach of correlative fluorescence electron microscopy (CFEM) can therefore be considered as an additional alternative imaging approach to unravel DRM structure–function relationships from micro- to nanometre length scales, from the cell to the molecule.     

一种开放式磁共振成像主磁体的设计方法

本文提出了一种开放式磁共振成像(MRI)超导磁体的设计方法.在对磁体模型进行简化的基础上获得初始的电流分布,然后将线圈截面的优化问题转化成一个非线性最小二乘问题,通过求解最小二乘问题得到实际的线圈截面参数.文章最后给出了一个设计算例.     

3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤的研究

本研究探讨3.0T磁共振成像(MRI)结合X线钼靶诊断乳腺恶性肿瘤的价值。采用回顾性研究方法,选取乳腺肿块患者110例162个病灶,给予3.0T MRI及X线钼靶检查。经病理确诊为恶性病变101个;恶性病灶形态不规则、边缘毛刺、时间-信号强度曲线(TIC)类型Ⅲ型和早期增强率≥60%比例明显高于良性病灶(P<0.05),而分叶状比例和表观扩散系数(ADC)值明显低于良性病变(P<0.05);恶性病变X线钼靶表现:形态不规则、钙化、结构不对称和大导管征比例明显高于良性病变(P<0.05);MRI联合X线钼靶诊断乳腺恶性病变的灵敏性、准确性和阴性预测值明显高于MRI诊断(P<0.05)。3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤有较好的价值。     

空中目标多波段红外辐射特性描述与仿真分析

针对空中目标在复杂背景下的探测需求,根据实际目标的运动特性,分析目标在飞行高度、飞行姿态角改变时的辐射特点,基于MODTRAN计算得到大气辐射和衰减数据,建立目标的三维模型、热辐射和反射模型,搭建空中目标的红外成像仿真系统.分析和仿真结果表明:在中波波段,目标尾焰的红外辐射比蒙皮强很多,在长波波段,蒙皮的红外辐射比较强,仿真图像的细节比较多,尾焰的红外辐射虽然有所减弱,红外成像效果依旧很好;相同探测条件下,由于位置越高大气越稀薄,探测器的可探测距离会变得比较远.目标红外辐射特性的分析和红外仿真系统的搭建对缩短红外探测器的研制周期和进一步确定探测器波段和系统分辨率等指标提供了参考依据.     

Carbon Dots (C‐dots) from Cow Manure with Impressive Subcellular Selectivity Tuned by Simple Chemical Modification

Improved cellular selectivity for nucleoli staining was achieved by simple chemical modification of carbon dots (C‐dots) synthesized from waste carbon sources such as cow manure (or from glucose). The C‐dots were characterized and functionalized (amine‐passivated) with ethylenediamine, affording amide bonds that resulted in bright green fluorescence. The new modified C‐dots were successfully applied as selective live‐cell fluorescence imaging probes with impressive subcellular selectivity and the ability to selectively stain nucleoli in breast cancer cell lineages (MCF‐7). The C‐dots were also tested in four other cellular models and showed the same cellular selection in live‐cell imaging experiments.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803     

Tantalum Nitride Nanosheets for Photoacoustic Imaging-Guided Photothermal Cancer Therapy

In this study, the synthesis of TaN nanosheets and their application in theranostic agents is reported. After coating polyethylene glycol (PEG) on the TaN nanosheets, the as-synthesized PEG-modified TaN nanosheets (TaN-PEG) show good stability and biocompatibility. Because of their high absorbance in the near-IR region, TaN-PEG can be utilized as photoacoustic imaging contrast agents for tumor imaging. Moreover, TaN-PEG has significant photothermal conversion performance, exhibiting effective laser-induced tumor ablation capability. The TaN-PEG possessing excellent photoacoustic contrast effect and photothermal properties thus have great promise in theranostic applications, especially imaging-guided cancer treatment.