基于高阶累计量的大气光通信自适应信号处理

针对强湍流信道下信号衰落的特点,分析了对数正态分布模型与K分布模型的适用范围.基于K分布模型建立大气光通信接收信号模型,并给出了自适应最优门限检测方法.采用四阶和六阶累计量对强湍流信道参量进行估计,采用二阶累计量对其它高斯噪音进行估计,得到K分布参量及高斯噪音统计量的预测值,实现自适应门限更新.基于Monte Calro算法进行仿真,给出了门限更新算法对通信系统误码率的影响,同时分析了信号采样率对估计参量偏差的影响.计算表明,在强湍流情况下,大气光通信系统的误码率性能得到极大的改善,优于基于MLSD检测的接收机.     

碲基掺铒光纤放大器对于渐变输入信号的瞬态响应

为了抑制输出信号功率的瞬态波动,提出了调理脉冲信号边沿变化方式的思想.通过有限差分法数值模拟四能级模型下的粒子数速率-光功率传输方程组,理论研究了宽带碲基掺铒光纤放大器(Erbium-doped Tellurite-based Fiber Amplifier,EDTFA)对于低频脉冲输入信号的瞬态响应.研究表明,相比具有阶跃上升沿的方波脉冲,选择一个合适的渐变上升沿脉冲信号可以有效地抑制EDTFA输出端信号功率的瞬时上冲幅度.在多信道系统中,选择渐变的信道功率上传和下载方式,可以延缓其余信道输出功率的瞬态响应速度,从而为后续增益箍制技术的实施提供了便利.     

空间雷电探测实时采集定位系统

星载雷电探测定位系统是利用光学探测器探测闪电事件的地理位置和光脉冲波形,系统采用CPLD+DSP的数字图像处理方案,利用了CPLD复杂逻辑可编程特性将系统的部分或全部功能集成在一片CPLD上,减小了系统硬件复杂程度,节省了印制版空间.利用DSP高速数字信号处理特性完成实时处理图像数据的功能.系统用CPLD完成图像信号的采集、编码和存储控制,缩小了星载设备体积,简化了电路结构;用DSP完成大量图像数据处理工作,提高了系统工作的实时性.     

压印光刻中的两步对正技术

压印光刻中套刻需要粗、精两级对正.实验采用一对斜纹结构光栅作为对正标记.利用物镜组观察光栅标记图像的边界特征进行粗对正,其准确度在精对正信号的捕捉范围内;利用光电接收器件阵列组合接收光栅莫尔信号,在莫尔信号的线区进行精对正.由于线性区的斜率大, 精对正过程中得到相应x,y方向的对正误差信号灵敏度高,利用高灵敏度对正误差信号作为控制系统的驱动信号,对承片台进行驱动定位,实现精对正.最终使X,Y方向上的重复对正准确度分别达到了± 21 nm(± 3σ)和±24 nm(± 3σ).     

HPI接口与PLX9054的逻辑实现

介绍了基于DSP的HPI接口和PLX9054芯片的特点及应用,使用ALTERA公司的CPLD-EPM7256实现了DSP芯片6701和PLX9054之间的无缝连接,并在PC机上获得了稳定的数据传输.     

FPGA-Implemented Fractal Decoder with Forward Error Correction in Short-Reach Optical Interconnects

Forward error correction (FEC) codes combined with high-order modulator formats, i.e., coded modulation (CM), are essential in optical communication networks to achieve highly efficient and reliable communication. The task of providing additional error control in the design of CM systems with high-performance requirements remains urgent. As an additional control of CM systems, we propose to use indivisible error detection codes based on a positional number system. In this work, we evaluated the indivisible code using the average probability method (APM) for the binary symmetric channel (BSC), which has the simplicity, versatility and reliability of the estimate, which is close to reality. The APM allows for evaluation and compares indivisible codes according to parameters of correct transmission, and detectable and undetectable errors. Indivisible codes allow for the end-to-end (E2E) control of the transmission and processing of information in digital systems and design devices with a regular structure and high speed. This study researched a fractal decoder device for additional error control, implemented in field-programmable gate array (FPGA) software with FEC for short-reach optical interconnects with multilevel pulse amplitude (PAM-M) modulated with Gray code mapping. Indivisible codes with natural redundancy require far fewer hardware costs to develop and implement encoding and decoding devices with a sufficiently high error detection efficiency. We achieved a reduction in hardware costs for a fractal decoder by using the fractal property of the indivisible code from 10% to 30% for different n while receiving the reciprocal of the golden ratio.     

Double Feature Extraction Method of Ship-Radiated Noise Signal Based on Slope Entropy and Permutation Entropy

In order to accurately identify various types of ships and develop coastal defenses, a single feature extraction method based on slope entropy (SlEn) and a double feature extraction method based on SlEn combined with permutation entropy (SlEn&PE) are proposed. Firstly, SlEn is used for the feature extraction of ship-radiated noise signal (SNS) compared with permutation entropy (PE), dispersion entropy (DE), fluctuation dispersion entropy (FDE), and reverse dispersion entropy (RDE), so that the effectiveness of SlEn is verified, and SlEn has the highest recognition rate calculated by the k-Nearest Neighbor (KNN) algorithm. Secondly, SlEn is combined with PE, DE, FDE, and RDE, respectively, to extract the feature of SNS for a higher recognition rate, and SlEn&PE has the highest recognition rate after the calculation of the KNN algorithm. Lastly, the recognition rates of SlEn and SlEn&PE are compared, and the recognition rates of SlEn&PE are higher than SlEn by 4.22%. Therefore, the double feature extraction method proposed in this paper is more effective in the application of ship type recognition.     

模型传递用于解析遥感傅里叶变换红外谱图

基于模型传递的原理,建立了一种可对存在背景干扰,谱峰严重混叠的遥感傅里叶变换红外(remote sensing Fourier transform infrared: RS-FTIR)谱图进行解析的方法。分别用4组分气体混合物的EPA红外标准谱图和RS-FTIR谱图,建立校正和预测模型,经过正交信号校正(OSC)处理后,用EPA红外谱图数据所建立的校正模型,对RS-FTIR谱图数据进行预测,得到的丙酮、甲醇、苯和三氯甲烷的均方根预测误差(RMSEP)分别为：0.008 5,0.018 0,0.064 0,0.002 8。未经OSC处理时的RMSEP依次是0.085 6,0.047 9,1.065 3,0.014 2。经优化,支集选择的方法为Kennard-Stone法,OSC在实现过程中循环次数为3时得到的预测结果最好。研究结果表明,该方法能够克服背景和校正模型给RS-FTIR监测大气污染物带来的制约。     

基于工作电流分析的回转副摩擦状态识别实验研究

回转副摩擦状态的变化对机械设备的运行有着重要影响. 针对回转副摩擦状态的识别问题, 设计了以回转副工作电流为摩擦特征来源的实验方案. 通过采集摩擦过程的回转副驱动电机工作电流信号, 分析实验信号的频域和时频域特征, 建立工作电流的摩擦特征库, 用于训练多分类支持向量机分类器, 并在分类器上完成摩擦状态的识别. 实验结果表明, 经特征提取与降维处理后建立的多分类支持向量机分类器具有近90%的识别正确率, 所提出的实验方案有利于实现远距离信号的采集, 适用实际生产加工.     

一种非正交对称条带束流位置监测器设计

介绍了一种条带束流位置监测器(BPM)的设计与仿真方法。在国家同步辐射实验室"太赫兹近场高通量材料物性测试系统"工程项目中,针对波荡器出口处真空室非正交对称性的问题,设计了矩形真空室和跑道形真空室下的两种非正交对称性条带BPM,并与传统的圆形真空室下条带BPM进行对比。基于边界元法,利用MATLAB软件分别对三种真空室下的条带BPM进行建模和仿真。仿真结果表明:相对于传统的圆形真空室下条带BPM,矩形和跑道形真空室下条带BPM灵敏度提高了30%,阻抗匹配误差相对降低了20%,束流位置拟合误差降低了80%。考虑加工精度,矩形真空室下的条带BPM更适用于该工程。