Performance of a Single-Family Heat Pump at Different Working Conditions Using Small Quantity of Propane as Refrigerant

The performance of a domestic heat pump that uses a low quantity of propane as refrigerant has been experimentally investigated. The heat pump consists of two minichannel aluminium heat exchangers, a scroll compressor, and an electronic expansion valve. It was charged with the minimum amount of refrigerant propane required for the stable operation of the heat pump without permitting refrigerant vapor into the expansion valve at incoming heat source fluid temperature to the evaporator of +10°C. The inlet temperature of the heat source fluid passing through the evaporator was varied from +10°C to ?10°C while holding the condensing temperature constant at 35°C, 40°C, 50°C, and 60°C, respectively. The minimum refrigerant charges required at above-tested condensing temperatures were found to decrease when the condensing temperature increased and were recorded as 230 g, 224 g, 215 g, and 205 g, respectively. The results confirm that a heat pump with 5 kW capacity can be designed with less than 200 g charge of refrigerant propane in the system. Due to the high solubility of propane in compressor lubrication oil, the amount of refrigerant which may escape rapidly in case of accident or leakage is less than 150 g.     

New Pool Boiling Heat Transfer in the Presence of Low-Frequency Vibrations Into a Vertical Cylindrical Heat Source

A vertical cylinder was applied as a heat source into a water pool; the vibrations were imposed into the heater with different heat fluxes, and the frequencies were adjusted at 10, 15, 20, and 25 Hz. An imaging system was employed to observe the produced bubbles around the cylindrical heat source. The results showed that the boiling heat transfer was enhanced under the vibrations with a shorter transient process, and the wall temperature also decreased. The best enhancement ratio was achieved at the frequency of 25 Hz and a heat flux value of 30 kW/m² as a consequence of imposed vibrations.     

Electronic structure of platinum at ultrahigh pressure

Abstract

Platinum is studied, theoretically, under very high compression. The calculated equation of state is found to agree well with the recent experimental data. At V/V₀ = 0.4, where V₀ is the experimental equilibrium volume, we find a transition from the face centered cubic structure (fcc), found at ambient pressure, to the body centered cubic structure (bcc). The calculated transition pressure is 26 Mbar. The stabilization of the bcc structure is explained by the eigen value sum.     

Analysis of polycyclic aromatic hydrocarbons extracted from air particulate matter using a temperature programmable injector coupled to GC–C–IRMS†

Compound specific isotopic analysis (CSIA) can provide information about the origin of analysed compounds – in this case, polycyclic aromatic hydrocarbons (PAHs). In the study, PAHs were extracted from three dust samples: winter and summer filter dust and tunnel dust. The measurement was performed using the method validated in our laboratory using pure, solid compounds and EPA 610 reference assortment.

CSIA required an appropriate clean-up method to avoid an unresolved complex in the gas chromatographic analysis usually found in the chromatography of PAHs. Extensive sample clean-up for this particular matrix was found to be necessary to obtain good gas chromatography–combustion–isotope ratio mass spectrometry analysis results. The sample purification method included two steps in which the sample is cleaned up and the aliphatic and aromatic hydrocarbons are separated.

The concentration of PAHs in the measured samples was low; so a large volume injection technique (100 μl) was applied. The δ_VPDB ¹³C was measured with a final uncertainty smaller than 1 ‰. Comparison of the δ_VPDB ¹³C signatures of PAHs extracted from different dust samples was feasible with this method and, doing so, significant differences were observed.     

On the moment of inertia of a proto neutron star

The influences of σ* and Φ mesons,temperature and coupling constants of nucleons on the moment of inertia of the proto neutron star(PNS) are examined in the framework of relativistic mean field theory for the baryon octet {n,p,Λ,Σ+,Σ0,Σ+,Ξ-,Ξ0} system.It is found that,compared with that without considering σ* and Φ mesons,the moment of inertia decreases.It is also found that the higher the temperature,the larger the incompressibility and symmetry energy coeficient,and the larger the moment of inertia of a PNS.The influence of temperature and coupling constants of the nucleons on the moment of inertia of a PNS is larger than that of the σ* and Φ mesons.     

Characteristics of the magnetic analysis system for a compact MPR-type spectrometer

The magnetic proton recoil(MPR)spectrometer is a novel diagnostic instrument with high perfor-mance for measurements of neutron spectra in inertial confinement fusion(ICF)experiments and high power fusion devices.A compact MPR-type spectrometer dedicated to the research of pulsed deuterium-tritium(DT)neutron spectroscopy of special experimental conditions is currently under design.Analyses of the main parameters and performance of the magnetic analysis system through 3-D particle transport calculations and MonteCarlo simulations and calibration of the system performance as a test using CR-39 solid track detector and α particle from 239pu and 226Ra radioactive sources are presented in this paper.The results indicate that the magnetic analysis system will achieve a detection efficiency level of 10-5-10-4 at an energy resolution of 1.5%-2.1%,and fulfills the design goals of the spectrometer.     

254 nm低通滤光片的研制

根据紫外光学系统的设计要求,在K9基底上研制了254 nm高反射率、可见光谱区高透过率的低通滤光片.根据膜系设计理论,通过针法优化,获得了干涉型低通滤光片的膜系;对电子束蒸镀HfO_2和MgF_2材料进行了研究,解决了材料喷溅的问题,减少了薄膜的吸收;采用考夫曼离子源,通过优化工艺参数,提高膜层致密性,解决了光谱曲线漂移的问题,改善了成膜质量.     

System size effects on probing nuclear dissipation with neutrons

Using a dynamical Langevin equation coupled with a statistical decay model, we calculate the excess of the pre-scission neutron multiplicities over its standard statistical-model values as a function of the nuclear dissipation strength for the three nuclei 190Os, 200Hg, and 210Po which have the same neutron-to-proton ratio N/Z. We find that by decreasing the size of the fissioning nuclei, the effects of nuclear dissipation on the excess of the pre-scission neutron multiplicity are substantially amplified, and that the sensitivity of this excess to the nuclear friction strength is considerably increased as well. We suggest that for those fissioning systems with the same N/Z that are populated in fusion reactions, to obtain a more accurate information of the nuclear dissipation strength by measuring the pre-scission neutron multiplicity, it is best to choose a system with a small size.     

卫星太阳能电池阵破损自动检测系统的研究

介绍了国内首次研制的卫星太阳能电池阵破损自动检测系统的检测原理、系统结构与设计及现场试用结果。系统采用专用照明系统,电池阵列经光学系统清晰成像至CCD传感器上,经信号放大、A/D转换后输入计算机管理和控制系统。图像传感探头自动扫描整块电池板,并由距离传感器控制,始终保持采集图像清晰。利用特有的系统控制和检测软件,处理每幅电池图像信息,检测结果通过列表形式给出损伤电池的位置、破损类型、破损度等参数。现场试验结果表明:该系统的检出率达98.5%以上,检测速度为每分钟20片电池,达到了快速、高精度、自动化检测太阳能电池阵的使用要求。     

掺杂型有机电致发光二极管的研究进展

有机电致发光具有结构简单、成本低、平面光源、节省能源等优点,其中掺杂型电致发光二极管因可以同时利用单重态和三重态的激子来发光和理论上能使器件内量子效率达到100%而倍受关注。从掺杂型电致发光二极管发光机理、主体材料、掺杂剂材料、白光器件几个方面阐述了该领域的研究进展。