用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。     

Conversion of E4 (E4=P4, As4, AsP3) by Ni(0) and Ni(I) Synthons – A Comparative Study

The reactivity of white phosphorus and yellow arsenic towards two different nickel nacnac complexes is investigated. The nickel complexes [(L¹Ni)₂tol] ( 1 , L¹=[{N(C₆H₃ⁱPr₂-2,6)C(Me)}₂CH]⁻) and [K₂][(L¹Ni)₂(μ,η^{1 : 1}-N₂)] ( 6 ) were reacted with P₄, As₄ and the interpnictogen compound AsP₃, respectively, yielding the homobimetallic complexes [(L¹Ni)₂(μ-η²,κ¹:η²,κ¹-E₄)] (E=P ( 2 a ), As ( 2 b ), AsP₃ ( 2 c )), [(L¹Ni)₂(μ,η^{3 : 3}-E₃)] (E=P ( 3 a ), As ( 3 b )) and [K@18-c-6(thf)₂][L¹Ni(η^{1 : 1}-E₄)] (E=P ( 7 a ), As ( 7 b )), respectively. Heating of 2 a , 2 b or 2 c also leads to the formation of 3 a or 3 b . Furthermore, the reactivity of these compounds towards reduction agents was investigated, leading to [K₂][(L¹Ni)₂(μ,η^{2 : 2}-P₄)] ( 4 ) and [K@18-c-6(thf)₃][(L¹Ni)₂(μ,η^{3 : 3}-E₃)] (E=P ( 5 a ), As ( 5 b )), respectively. Compound 4 shows an unusual planarization of the initial Ni₂P₄-prism. All products were comprehensively characterized by crystallographic and spectroscopic methods.     

分光计调整方法的改进及白光色散研究

普通物理实验中使用分光计观察白光散射,测量三棱镜顶角,最小偏向角等。但在测量前需借助三棱镜调整分光计,有人通过理论分析发现传统的调节方法存在误调和误差,并提出了改进的实验调整方法。本文我们通过实验来验证该方法是否可行,并在实验中发现了其它的问题。     

Low temperature synthesis and luminescence investigations of YAG:Ce,Eu nanocomposite powder for warm white light-emitting diode

The preparation of the cerium and europium co-doped YAG materials as well as the study for their synthesis and emitting mechanism of the energy transfer between Ce³⁺ and Eu³⁺ were investigated in the present study. YAG:Ce³⁺, Eu³⁺ powders were synthesized using a high-energy ball milling method in different sintering temperature and atmosphere: air and H₂/N₂. The effects of the synthesis procedure on the crystallinity, morphology, structure, and luminescence spectra were examined by X-ray diffraction, field emission-scanning electron microscopy, and photoluminescence spectroscopy. The europium co-doped YAG:Ce³⁺ phosphors is improved the chromaticity coordinates.     

Reversible,Photoinduced Activation of P4 by Low‐Coordinate Main Group Compounds

Two unique systems based on low‐coordinate main group elements that activate P₄ are shown to quantitatively release the phosphorus cage upon short exposure to UV light. This reactivity marks the first reversible reactivity of P₄, and the germanium system can be cycled 5 times without appreciable loss in activity. Theoretical calculations reveal that the LUMO is antibonding with respect to the main group element–phosphorus bonds and bonding with respect to reforming the P₄ tetrahedron, providing a rationale for this unprecedented activity, and suggesting that the process is tunable based on the substituents.     

Bright White‐Light Emission from a Single Organic Compound in the Solid State

White‐light‐emitting materials and devices have attracted enormous interest because of their great potential for various lighting applications. We herein describe the light‐emitting properties of a series of new difunctional organic molecules of remarkably simple structure consisting of two terminal 4‐pyridone push–pull subunits separated by a polymethylene chain. They were found to emit almost “pure” white light as a single organic compound in the solid state, as well as when incorporated in a polymer film. To the best of our knowledge, they are the simplest white‐light‐emitting organic molecules reported to date.     

The Optimization of a Novel Hydrogel—Egg White-Alginate for 2.5D Tissue Engineering of Salivary Spheroid-Like Structure

Hydrogels have been used for a variety of biomedical applications; in tissue engineering, they are commonly used as scaffolds to cultivate cells in a three-dimensional (3D) environment allowing the formation of organoids or cellular spheroids. Egg white-alginate (EWA) is a novel hydrogel which combines the advantages of both egg white and alginate; the egg white material provides extracellular matrix (ECM)-like proteins that can mimic the ECM microenvironment, while alginate can be tuned mechanically through its ionic crosslinking property to modify the scaffold’s porosity, strength, and stiffness. In this study, a frozen calcium chloride (CaCl₂) disk technique to homogenously crosslink alginate and egg white hydrogel is presented for 2.5D culture of human salivary cells. Different EWA formulations were prepared and biologically evaluated as a spheroid-like structure platform. Although all five EWA hydrogels showed biocompatibility, the EWA with 1.5% alginate presented the highest cell viability, while EWA with 3% alginate promoted the formation of larger size salivary spheroid-like structures. Our EWA hydrogel has the potential to be an alternative 3D culture scaffold that can be used for studies on drug-screening, cell migration, or as an in vitro disease model. In addition, EWA can be used as a potential source for cell transplantation (i.e., using this platform as an ex vivo environment for cell expansion). The low cost of producing EWA is an added advantage.     

Urea Biosensor Based on Electrochromic Properties of Prussian Blue

Prussian blue (PB) is an electrochromic material, which can be used as a signal transducer in the formation of optical urea biosensors. The previous researches in electrochromic properties of PB demonstrated the optical PB response to ammonium ions, which occurs when ammonium ions are interacting with PB layer at a constant 0.2 V vs Ag|AgCl|KCl_sat potential. In this work PB optical dependence on ammonium ions concentration was applied in the formation of electrochromic urea biosensor. Biosensor was formed by modifying the optically transparent indium tin oxide (ITO) coated glass electrode (glass/ITO) with Prussian blue layer and immobilizing urease (glass/ITO/PB‐urease). Calibration curve showed the linear dependency (R²=0.995) between the change of maximal absorbance (ΔA) and urea concentration in concentration range varying from 3 mM to 30 mM. The highest sensitivity (4 ΔA M^?1) of glass/ITO/PB‐urease biosensor is in the concentration range from 7 mM to 30 mM. It was determined that working principle of the glass/ITO/PB‐urease biosensor is not related to pH changes occurring during enzymatic hydrolysis of urea.     

Multicomponent Organic Metal Halide Hybrid with White Emissions

Zero‐dimensional (0D) organic metal halide hybrids, in which organic and metal halide ions cocrystallize to form neutral species, are a promising platform for the development of multifunctional crystalline materials. Herein we report the design, synthesis, and characterization of a ternary 0D organic metal halide hybrid, (HMTA)₄PbMn_0.69Sn_0.31Br₈, in which the organic cation N‐benzylhexamethylenetetrammonium (HMTA⁺, C₁₃H₁₉N₄⁺) cocrystallizes with PbBr₄^2?, MnBr₄^2?, and SnBr₄^2?. The wide band gap of the organic cation and distinct optical characteristics of the three metal bromide anions enabled the single‐crystalline “host–guest” system to exhibit emissions from multiple “guest” metal halide species simultaneously. The combination of these emissions led to near‐perfect white emission with a photoluminescence quantum efficiency of around 73 %. Owing to distinct excitations of the three metal halide species, warm‐ to cool‐white emissions could be generated by controlling the excitation wavelength.     

Comparison of a Rapid Light-Induced and Forced Test to Study the Oxidative Stability of White Wines

The oxidation processes of white wines can occur during storage and commercialization due to several factors, and these can negatively affect the color, aroma, and quality of the wine. Wineries should have faster and simpler methods that provide valuable information on oxidation stability of wines and allow fast decision-making procedures, able to trigger suitable technological interventions. Using a portable prototype instrument for light irradiations at different wavelengths and times was considered and evaluated on sensorial, spectrophotometric, and colorimetric parameters of white wines. The sensorial analysis revealed that white and light blue were the most significant, after only 1 h of irradiation. The experimental results showed that hydrogen peroxide could enhance the effect of light treatment, allowing a contemporary evaluation of the oxidation stability of wine against light and chemical stresses. As expected, a good correlation (R² > 0.89) between optical density at 420 nm and b* parameter was highlighted. The synergic effect of light and H₂O₂ was also studied on the hydrolyzable and condensed tannins’ additions to white wine. The proposed methodology could be used to evaluate the oxidative stability of white wines, but also to evaluate the effect of some oenological adjuvants on wine stability.