双波长高精度红外测温仪

利用双波长红外测温方法,通过黑体红外辐射曲线中双波长等比吸收的原理消除了由于辐射环境中水蒸气等外界吸收原因造成的单波长红外测温仪中的测量误差,实现更稳定的高精度红外测温.该方法绕开了传统红外测温方法中"辐射率修正困难"的问题.同时利用此红外测温仪器改进了金属钨电子逸出功测量实验.     

Routing and wavelength assignment algorithms for multiclass WDM optical networks

In this paper dynamic routing and wavelength assignment strategies have been proposed for multiclass WDM optical networks. Multiclass optical networks provide multiple classes of services to the subscriber according to the requirement, which in turn increase operational profitability. Each class of service could be characterized by parameters like number of wavelengths, expected call holding time and average arrival rate of request. The proposed strategies have been analyzed and compared with existing strategies on the basis of blocking probabilities for multiclass traffic scenarios. Simulation results on different network topologies demonstrate that the performance of proposed strategies “Fixed shortest/alternate shortest path routing with wavelength reservation (FSASWR)” and “Fixed alternate shortest path routing with least priority wavelength assignment (FASPL)” are much better as compared to existing strategies. Proposed strategies minimize blocking probability of the multiclass network using limited number of wavelengths.     

质子交换LiNbO3波导调制器多模截止波长的测试技术研究

提出并实验了一种采用倒置输入的结构来测定Y分支LiNbO3波导相位调制器的多模截止波长的新方法,模式耦合分析表明,倒置输入的Y分支波导的多模传输的输出功率具有随波长变动发生振荡的特征,该特征可用于定量判定多模截止波长.方法的有效性得到了波束传播法(BPM)仿真和样品实验两方面的验证.     

一种通带平坦的粗波分复用/解复用器件的研制

随着粗波分复用(CWDM)系统在城域网和接入网中日益广泛的应用,人们对粗波分复用／解复用器的研究也逐渐展开。报道了一种8通道波长间隔为20nm的粗复用／解复用器。该器件基于阵列波导光栅(AWG)原理设计,利用平面光波导技术(PLC)制作,采用多模干涉输入结构和“S”形阵列波导结构,实现了较宽的通带宽度和较低的串扰。实验测得1dB带宽大于10nm,相邻串扰大于24dB,非相邻串扰大于32dB。介绍了其设计原理和制作过程,给出了光束传播法(BPM)数值模拟结果,并和实验结果进行了对比。     

Superprism Behaviour of an Array of Photonic Crystal Waveguides

The behaviour of an array of photonic crystal waveguides is numerically investigated. It is shown that high dispersion may be achieved in the telecommunication window around 1550 nm, with a device whose dimensions are in the order of half a mm².     

MoS_2溶液的波长选择性光限幅效应研究

采用N,N-二甲基甲酰胺(DMF)和四氢呋喃(THF)为溶剂,用离散法制备二硫化钼(MoS2)悬浮溶液,并用开孔Z扫描方法研究其在可见和近红外区域的非线性光学特性.结果显示,在强激光照射下,MoS2(in THF)悬浮溶液在可见波段(530 nm)透过率增强为常光透过率的1.54倍,表现为饱和吸收;在近红外波段(790 nm)透过率减弱为常光透过率的0.6倍,表现为反饱和吸收,具有很好的波长选择性光限幅效应.而作为对比的MoS2(in DMF)悬浮溶液在全波段透过率降低,呈现反饱和吸收特性,波长选择性不明显.机理解释可能为饱和吸收和热效应导致的自衍射两种机制联合作用.     

Single to 16-Channel Wavelength Conversion at 10 Gb/s Based on Cross-Gain Modulation of ASE Spectrum in SOA

A simple scheme for single to multi-channel wavelength conversion based on cross-gain modulation of amplified spontaneous emission (ASE) spectrum in semiconductor optical amplifier (SOA) is described. Single to 16-channel wavelength conversion at 10 Gb/s is first demonstrated without any additional probe lights, the modulation information carried by input signal could be converted into arbitrary many channels if only the demultiplexer with enough channels is exploited. Output performance and pattern effects are investigated experimentally.     

基于拉曼光谱散射的新型分布式光纤温度传感器及应用

介绍了分布式光纤拉曼温度传感器(DTS)的基本原理、发展趋势和工程应用研究状况,研究了分布式光纤拉曼温度传感器的关键技术,全面提升了DTS的性能。将拉曼放大技术应用于DTS系统,用拉曼增益部分抵偿光纤的传输损耗,使系统的传感长度达到50 km;对脉冲激光器进行211位循环编码,在接收时采用相关运算解调,显著提高系统的信噪比,使测温不确定度达到1 ℃;采用双波长自校正技术提高了系统的空间分辨率,达到2 m;在DTS系统中嵌入光开关,使测温通道成倍扩展,有效延伸了传感光纤的总长度,组成光纤传感网络。     

1018 nm短波长掺镱光纤激光高功率自组织相干合成

搭建了两台高功率、低量子损耗的1018 nm短波长掺镱光纤激光器,进行了全光纤结构下两路光纤激光器的相干合成实验。获得了功率为55 W、合成效率为90.2%的相干输出,这是当前严格单模1018 nm光纤激光器的最高功率水平。同时,验证了Michelson腔自组织相干合成技术能够实现光纤激光器的高功率单模输出。     

16×0.8nm硅基二氧化硅阵列波导光栅设计

给出了更为合理的阵列波导光栅(AWG)的设计原则。在设计时兼顾了输出谱的非均匀性Lu和输出通道数N的要求,克服了设计中可能引起通道数N丢失和不考虑输出谱非均匀性Lu的缺点。用该方法设计了折射率差为0 75%和16×0 8nm的硅基二氧化硅AWG。采用广角有限差分束传播方法(FD BPM)对所设计的AWG进行了输出谱的模拟,得到了插损为 1.5dB、串扰为 48dB、通道非均匀性约为1dB的AWG,设计指标达到了商用要求。