MIM结构的SPP模式理论与仿真计算研究

为了进一步明确MIM （Metal-insulator-metal）波导结构的SPP （Surface plasmon polariton）模式特性,建立了MIM结构的SPP模式关系、激发系数和反射系数的理论模型。仿真数值计算结果表明：较大的介质厚度的TM基态模式衰减超过了振荡模式衰减,与传统的介质波导明显不同;TE模式表现为失真的介质光波导模式特性,其传播距离要远大于TM₀;MIM结构中腔的Q值随着长度增加而增大,表明了SPP反射受限;腔的品质因数改变与端面关系密切;MIM波导可以在具有更大Q值下确保光波更好地耦合成需要的SPP模式。     

聚合物波导型表面等离子体共振传感器的特性研究

基于表面等离子体共振理论,将SU-8作为波导芯层材料,以聚甲基丙烯酸甲酯(PMMA)为下包层材料,设计了一款聚合物波导型SPR传感器。理论计算了波导芯层折射率、被测物折射率、不同金属薄膜及其厚度等因素对表面等离子体共振曲线的影响。分析结果表明,在可测试范围内,被测物折射率越大,灵敏度越高;波导芯层折射率减小,共振峰向长波方向移动,被测物检测范围整体向折射率小的方向偏移,波导芯层折射率增大则相反。     

束流发射度对太赫兹微电真空折叠波导行波管性能的影响

采用理论分析与数值模拟相结合的方法,分别对140,220和345 GHz折叠波导行波管中的束流发射度的影响因素及其对直流导通率的影响进行了分析,总结了发射度随频率、结构参数和电子束参数的变化规律。研究发现,在太赫兹频段束流发射度直接决定着聚焦磁场的选取设计, 是表征太赫兹频段束流品质的一个重要参量。     

基于光谱解调的对称波导型表面等离子体共振传感研究

表面等离子体共振(SPR)传感系统有角度谱、光谱、强度、相位等解调方式,其中光谱型的(SPR)传感系统因可以使用光纤导光,将传感部分独立出来,可进行远距离传感和现场检测,并能有效缩小系统的体积。对称光波导型(SOW)SPR因金属膜层两边的折射率完全相同,表面等离子体波传播距离更长,穿透深度更深,比传统的SPR系统具有更高的灵敏度和分辨率。对对称波导型(SOW)SPR进行光谱解调研究,以MgF₂-Au-MgF₂结构的SOW-SPR为传感单元,同时以光纤输出的卤素灯为光源, 搭建了一套光谱解调的SOW-SPR检测系统,以不同浓度的葡萄糖溶液对系统折射率分辨率进行测量,得到2.8×10-7 RIU的分辨率。为SOW-SPR系统小型化、现场检测以及远距离探测提出一种可能实现的手段,具有很好的应用前景。     

波导管中微波波长测量方法的研究

基于微波测量线中驻波分布公式,采用测量驻波强度沿着 x轴分布的数据,拟合得到了波导管中微波的波长,不仅误差得到减小,而且可以绕过驻波比测量,用拟合参量计算微波反射率。     

离子交换LiNbO_3:Fe平面光波导中两波混合的研究

本文利用耦合波理论分析推导了单模平面光波导中两波混合的耦合波方程和弱相干光放大率的表示式.并且,在LiNbO_3:Fe单模平面光波导中进行了两波混合的实验研究,得到了与理论分析相符合的结果.     

Photonic crystal waveguides for coarse-selectivity devices

We discuss devices based on photonic crystal planar waveguides for use as wavelength-selective applications via the mini-stopband extraction mechanism. We present experimental data for the core of a compact demux system. We show that spatial and spectral behaviours are as intended from coupled-mode theory, as well as from the finite-difference time-domain approach. Finally, we propose architectures with large crosstalk and some inherent fabrication-related advantages achieved by duplicating the basic multimode waveguide and using it as a spectral filter.     

基于金属包覆磁性波导结构的磁光Bragg器件特性分析

使用金属包覆磁性波导中的磁光耦合理论分析了静磁表面波与导波光在金属／电介质／钇铁石榴石／钆镓石榴石结构中的磁光共线作用，讨论了金属覆层和斜向场对磁光模式转换效率的影响。计算表明，金属包覆波导可以提高磁光作用，通过调节金属覆层与磁性薄膜间距得到了比空气／4a铁石榴石／钆镓石榴石的传统三明治波导情形高8．7dB的模式转换效率；而同时优化偏置磁场方向和金属包覆波导参数，模式转换效率可以进一步提高5．25dB。因此，金属包覆波导可以用于提高磁光Bragg器件性能，在微波和光信息处理等方面具有广阔的应用前蒂。     

Optical waveguides in LiNbO<Subscript>3</Subscript> and stoichiometric LiNbO<Subscript>3</Subscript> crystals by proton exchange

The formation of optical planar waveguides in LiNbO₃ and stoichiometric LiNbO₃ crystals by proton exchange was reported. The prism-coupling method was used to characterize the dark-line spectroscopy at the wavelength of 633 and 1539 nm, respectively. The mode optical near-field outputs from proton-exchanged LiNbO₃ and SLN waveguides at 633 nm were presented. The mode field from stoichiometric LiNbO₃ (SLN) waveguide is lighter and more uniform than that from LiNbO₃ waveguide, which means the quality of the waveguide in SLN crystal is better than that of the LiNbO₃ waveguide. For proton-exchanged LiNbO₃ waveguides, the evolution of the refractive index profile with annealing was presented. The disorder profiles of Nb atoms in proton-exchanged LiNbO₃ waveguides were obtained by Rutherford backscattering/channeling technique. It is shown that the longer the exchange time, the larger the displacement of Nb atoms. Supported by the National Natural Science Foundation of China (Grant No. 10475052) and the Scientific Research Start-up Financing of Qufu Normal University     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.