Phase study of the system Li2Se-In2Se3

The binary system Li₂Se-In₂Se₃ was investigated in the range of 40 to 100 mol% In₂Se₃ by thermoanalytical and X-ray methods. The system is characterized by two eutectic points. Beside the two binary components and the known ternary compound LiInSe2 another ternary compound crystallizes in this binary system at 83.3 mol% In₂Se₃. This compound was identified as LiIn₅Se₈. In contrast to (Cu, Ag)^IB₅ ^IIIC₈ ^VI compounds such as CuIn₅S₈ [1] it does not crystallize in the spinel structure. LiIn₅Se₈ shows a stratified structure. The melting point was determined to be at 810°C. Starting from room temperature up to the melting point no phase transitions were observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

固固相反应合成牛磺酸水杨醛钾与锑、铋的配合物

合成了牛磺酸水杨醛钾,并采用室温固固相反应法合成了牛磺酸水杨醛钾与三氯化锑和三氯化铋的配合物,其组成为:K2MC18H20O8N2S2 (M = Sb, Bi)。两种配合物的晶体结构均属于单斜晶系,锑配合物的晶胞参数为:a = 1.2869 nm, b = 1.7636 nm, c = 1.9917 nm, β= 93.79埃活榕浜衔锏木О问篴 = 1.4770 nm, b = 2.0334 nm, c = 2.0149 nm, β= 94.05。红外光谱表明N、Cl原子参与了配位,中心离子的配位数为5。     

Contributions on the Properties of Titanates with Ilmenite Structure. IV. The effect of an order-disorder transition on the high temperature electrical conductivity of NiTiO3

NiTiO₃ shows an order-disorder transition from an ordered ilmenite structure to a corundum structure at high temperatures. The transition is followed by a strong increase of the specific electrical conductivity. The conductivity was investigated as a function of temperature and oxygen activity. An order parameter according to common phase transition theories can be used to describe the behaviour of the conductivity in the transition region and vice versa. A model for the defect structure of NiTiO₃ is presented.     

HPLC Analysis of Cotinine in Urine After SPE with a Cholesterol-Modified Adsorbent

A one-step solid-phase extraction procedure, based on a new silica gel adsorbent modified with cholesterol groups, has been investigated for measurement of cotinine in urine. Cotinine is the main metabolite of nicotine in the human body and is analyzed as a biomarker for assessment of direct or passive exposure to tobacco smoke. New cholesterol-modified adsorbents have been obtained by chemical modification of silica gel of different porosity with cholesterol ligands. Although recovery by this extraction procedure were optimum over a relatively broad range of sample pH (3.1–8.0), analytical conditions such as sample loading, washing and elution conditions, concentration of cotinine to be extracted, and the type of adsorbent used for extraction were found to affect the efficiency of the procedure and had to be controlled for optimum recovery. When these conditions were controlled, recovery of cotinine from spiked human urine was reproducible and depended on compound ionization. Quantitative analysis of cotinine was performed by reversed-phase high-performance liquid chromatography with UV detection. Presented at: Conference of the Hyphenation of Liquid Chromatography–Nuclear Magnetic Resonance Spectroscopy, Liquid Chromatography–Mass Spectrometry and Related Topics, Tuebingen, Germany, March 25–29, 2006.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Determination of benzene, toluene, ethylbenzene and xylenes in air by solid phase micro-extraction/gas chromatography/mass spectrometry

The aim of the study was to analyse BTEX compounds (benzene, toluene, ethylbenzene, xylenes) in air by solid phase micro-extraction/gas chromatography/mass spectrometry (SPME/GC/MS), and this article presents the features of the calibration method proposed. Examples of real-world air analysis are given. Standard gaseous mixtures of BTEX in air were generated by dynamic dilution. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fibre exposed for 30 min to standard gas mixtures or to ambient air. The behaviour of the analytical response was studied from 0 to 65 g/m³ by adding increasing amounts of BTEX to the air matrix. Detection limits range from 0.05 to 0.1 g/m³ for benzene, depending on the fibre. Inter-fibre relative standard deviations (reproducibility) are larger than 18%, although the repeatability for an individual fibre is better than 10%. Therefore, each fibre should be considered to be a particular sampling device, and characterised individually depending on the required accuracy. Sampling indoor and outdoor air by SPME appears to be a suitable short-delay diagnostic method for volatile organic compounds, taking advantage of short sampling time and simplicity.     

Closed‐form rectangular atomic wave functions of an N‐dimensional atom

A closed‐form expression has been derived to obtain the N‐dimensional rectangular atomic wave functions. The wave functions can be obtained straightforwardly with the knowledge of the angular momentum quantum numbers and the dimension and there is no need to employ recursive methods as in previous works. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem 88: 263–274, 2002     

Phase transformations during electrochemical incorporation of lithium in intermetallic compounds of aluminum

Comparative study of the regularities of the reaction and specific features of phase formation during electrochemical incorporation of lithium from propylene carbonate solutions in intermetallic aluminum-based compounds (CuAl₂, Mg₂Al₃, and NiAl) and pure metals (Al, Cu, Mg, and Ni) was performed. The initial stage of the process was shown to be dissolution of lithium in the solid phase limited by diffusion for all studied substrates. Trace amounts of lithium-containing by-products, were detected in NiAl, Ni, and Cu samples. The subsequent change in the limiting stage is related to the beginning of formation of a new phase: metallic lithium (on Mg₂Al₃, NiAl, Mg, Ni, and Cu) or LiAl (on Al and CuAl₂ cathodes). In the latter case, the solid-phase substitution occurs, which is formally described by the equation: CuAl₂+2Li⁺+2e→2LiAl+Cu. Thus, the specific features of phase formation on the CuAl₂ electrode correspond to the highest (among three intermetallides studied) concentration of Al atoms in the crystal lattice of the compound. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8. pp. 1525–1530, August, 1998.     

Synthesis and properties of liquid crystalline polyurethanes

1,4-Bis(p-hydroxybenzoate)phenylene was prepared using 1,4-bis(trimethylsiloxy)benzene and p-hydroxybenzoyl chloride as starting materials. A series of novel 1,4-bis(p-hydroxyalkoxybenzoate)phenylene were synthesized by reaction of 1,4-bis(p-hydroxybenzoate) phenylene with 3-brompropanol and 4-bromobutanol, respectively. The liquid crystal polyurethanes were prepared by 1,4-bis(p-hydroxyalkoxybenzoate)phenylene with MDI (p-methylene diphenylenediisocyanate) and 2,4-TDI(2,4-toluenediisocyanate), respectively. The thermotropic properties, the melting point (T _m) and the isotropization temperature (T _i) of the synthesized polyurethanes were characterized by DSC, IR and POM. It showed that all of the polyurethane polymers exhibited thermotropic liquid crystalline properties between 144°C and 260°C. The transition temperature (T _m and T _i) decreased with an increase in the length of the methylene spacer. __________ Translated from Journal of Qingdao University of Science and Technology, 2006, 27(1) (in Chinese)     

Thermodynamics of saturated lanthanide nitrate-water systems

The thermodynamic properties of saturated aqueous lanthanide nitrate solutions were determined using recently published critically evaluated solubility and activity data. The variation of the thermodynamic functions and congruent melting points as a function of atomic number are interpreted in terms of changes in inner sphere coordination number in both the solid hexahydrates and in the aquo ions, and in terms of the double-double effect.Inconsistencies in experimental solubility data are generally caused by uncertainties in solid phase composition which is shown to be due to the very small Gibbs energies accompanying transitions from stable to metastable systems differing in the number of hydrating water molecules.Presentation to First International Symposium on Solubility Phenomena, University of Western Ontario, London, Ontario, August 21–23, 1984.