Study of temperature transitions in solid poly(oxymethylene) by thermal analysis methods

Poly(oxymethylene)s with different molecular mass and chemical structure were studied using DSC, dynamic mechanical relaxation, thermomechanical analysis, and thermogravimetry.Molecular mobilities of two types were found in the amorphous phase of poly(oxymethylene). Unconstrained chains of poly(oxymethylene) soften at –70°C and then amorphous chains with different restraints from the crystalline phase are successively activated in a wide temperature interval.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThis work has been supported by DuPont Company     

Measurement of the enthalpy of phase transition for iron chevrel phase sulphide in the temperature range from 300 to 500 K

Enthalpy increment H_T-H_289K measurements have been made on iron Chevrel phase sulphide Fe₂Mo₆S_7.8, in the temperature range 300 to 500 K by the drop method using a hightemperature Calvet-type twin calorimeter. The first-order phase transition of this sulphide from a triclinic (low-temperature phase) to a rhombohedral (high-temperature phase) occurred at 375 K, and the enthalpy was evaluated to be 6.0 kJ/mol. The heat capacities of iron Chevrel phase sulphide Fe₂Mo₆S_7.8 were also calculated before and after the phase transition.

---

Zusammenfassung Nach der Tropfenmethode wurden mittels eines Hochtemperaturdoppelkalorimeters vom Typ Calvet im Temperaturbereich 300–500 K an Fe₂Mo₆S_7.8Messungen der Enthalpieinkremente H_T-H_298K durchgeführt. Die Phasenumwandlung erster Ordnung bei diesem Sulfid von der triklinen (Niedertemperaturphase) in die rhomboedrische (Hoch-temperaturphase) erfolgt bei 375 K und die Enthalpie erhielt man mit einem Wert von 6.0 kJ/mol. Die Wärmekapazitäten für Fe₂Mo₆S_7.8 wurden sowohl vor als auch nach der Phasenumwandlung berechnet.

     

Arylcarbamoylated allylcarbamido-β-cyclodextrin: synthesis and immobilization on nonfunctionalized silica gel as a chiral stationary phase

Four new chiral stationary phases based on mono-(6^A-allylcarbamido-6^A-deoxy)-arylcarbamoylated β-cyclodextrin were synthesized. The chiral stationary phase of phenylcarbamoylated β-cyclodextrin exhibited excellent separation capability for a variety of chiral compounds. Compared with the previous work, it was found that the spacer remained on the surface of the silica gel and decreased the enantioseparation capability.     

硝酸银及其产物银对六角相液晶流变性影响

用偏光显微镜测定了硝酸银及其产物银对NP－10／水六角相区的影响，用动态 （应力和频率扫描）和稳态（蠕变－恢复）方法研究了硝酸银的加入和银的生成对 该体系粘弹性的影响。无机前驱物硝酸银和银的生成能使六角相区略缩，动态流变 实验表明，无机物引入纯六角相液晶体系中会使其抗剪切的能力降低，对相区两侧 影响与振荡所采用的频率有关。生成的银原子会在胶束表面聚集，增加了胶束内部 不同EO链之间的交联，造成松弛时间变长，粘弹性指数降低，稳态实验所得到的结 果与动态实验一致，并将粘性和弹性定量化。用弹簧－粘壶模型和液晶的空间构型 及作用力解释了实验结果。     

Growth of clusters in a first-order phase transition

The results of computer simulations of phase separation kinetics in a binary alloy quenched from a high temperature are analyzed in detail, using the ideas of Lifshitz and Slyozov. The alloy was modeled by a three-dimensional Ising model with Kawasaki dynamics. The temperature after quenching was 0.59T _c, whereT _c is the critical temperature, and the concentration of minority atoms was=0.075, which is about five times their largest possible single-phase equilibrium concentration at that temperature. The time interval covered by our analysis goes from about 1000 to 6000 attempted interchanges per site. The size distribution of small clusters of minority atoms is fitted approximately byc ₁(1-)³ w(t),c ₁ (1–)⁴ Q _l w(t)^l(2l10); wherec _l is the concentration of clusters of sizel;Q ₂,...,Q ₁₀ are known constants, the cluster partition functions;t is the time; andw(t)=0.015(1+7.17t ^–1/3). The distribution of large clusters (l20) is fitted approximately by the type of distribution proposed by Lifshitz and Slyozov,c _l ,(t)=–(d/dl) [lnt+p (l/t)], where is a function given by those authors and is defined by(x)=C _o e–x-C ₁ e ^–4x/3-C ₂ e ^–5x/3;C ₀,C ₁,C ₂ are constants determined by considering how the total number of particles in large clusters changes with time.Supported by the U.S. Air Force Office of Scientific Research under Grant No. 78-3522 and by the U.S. Department of Energy under Contract No. EY-76-C-02-3077*000.     

氟化钾团簇的相变、成核和重结晶的分子动力学模拟

我们利用Born-Mayer-Huggins相互作用势函数对(KF)_N(N=108，256，500和864)团簇进行了分子动力学(MD)模拟。为了避免周期性边界条件对相变、成核和重结晶的干扰作用，对体系采用了自由边界。基于MD模拟结果，对团簇的熔化温度、熔化焓、扩散系数、成核速率、固液界面自由能、临界核大小等进行了计算和讨论。在对(KF)₈₆₄双晶团簇的热退火模拟中，观察到了固态的重结晶和晶粒的生长。经典的成核理论成功地解释了(KF)₈₆₄双晶团簇的重结晶MD模拟结果。     

Polymorphism of paracetamol

The thermodynamic relationship between crystal modifications of paracetamol was studied by alternative methods. Temperature dependence of saturated vapor pressure for polymorphic modifications of the drug paracetamol (acetaminophen) was mea sured and thermodynamic functions of the sublimation process calculated. Solution calorimetry was carried out for the two modifications in the same solvent. Thermodynamic parameters for sublimation for form I (monoclinic) were found: ΔG _sub²⁹⁸=60.0 kJ mol⁻¹; ΔH _sub²⁹⁸=117.9±0.7 kJ mol⁻¹; ΔS _sub²⁹⁸=190±2 J mol⁻¹ K⁻¹. For the orthorhombic modification (form II), the saturated vapor pressure could only be studied at 391 K. Phase transition enthalpy at 298 K, ΔH _tr²⁹⁸(I→II)=2.0±0.4 kJ mol⁻¹, was derived as the difference between the solution enthalpies of the noted polymorphs in the same solution (methanol). Based on ΔH _tr²⁹⁸ (I→II), differences between temperature dependencies of heat capacities of both modifications and the vapor pressure value of form II at 391 K, the temperature dependence of saturated vapor pressure and thermodynamic sublimation parameters for modification II were also estimated (ΔG _sub²⁹⁸=56.1 kJ mol⁻¹; ΔH _sub²⁹⁸=115.9±0.9 kJ mol⁻¹; ΔS _sub²⁹⁸=200±3 J mol⁻¹ K⁻¹). The results indicate that the modifications are monotropically related, which is in contrast to findings recently reported found by classical thermochemical methods.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. I. Self-organization of cationic polymer particles on alkylated glass plates

Monodisperse, cationic polymer particles bearing quaternary ammonium groups effectively self-organized on hydrophobic solid substrates such as alkylated glass plates and polymer films to form particle monolayers. With an increase of the particle surface charge density, the surface coverage decreased and the morphology of particle monolayers changed from aggregated type to dispersed type. The dispersed type of particle monolayers having a relatively regular particle distance was formed at higher temperature. The self-organization behaviors on alkylated glass plates were different from those on unmodified glass plates through electrostatic interaction. The formation of particle monolayers on alkylated glass plates occurred only over a certain latex concentration range in contrast with that on unmodified glass plate. The adhesive strength of particle monolayers was enhanced by annealing at temperatures above the glass transition temperature (T _g) of the particles. Lens-shaped particle monolayers were fabricated by annealing the dispersed type of particle monolayers.     

Determination of the Insect Repellent Bayrepel® in Pool and Lake Water by Gas Chromatography after Preconcentration with Solid-Phase Extraction and Stir-Bar-Sorptive Extraction

A method for the determination of the new insect repellent Bayrepel in bathing lakes and public pools is presented. Sample preconcentration is performed either by solid-phase extraction (SPE) or stir bar sorptive extraction (SBSE). Analysis of the enriched analyte using gas chromatography-mass spectrometry (GC-MS) led to almost identical limits of detection (LOD) of 25ngL^–1 for Bayrepel with both extraction methods. Because of the slightly reduced handling effort involved, the method based on preconcentration by SBSE was finally chosen for the analysis of real samples.