Actuation design for high‐performance shape memory polyurethanes

A series of shape memory polyurethanes were synthesized from poly(tetramethylene glycol), 4,4‐methylene diphenyl diisocyanate, and 1,3‐butanediol. The prepolymers with different molecular weights (M_c) were capped with 2‐hydroxyl ethylacrylate or 3‐aminopropyltriethoxysilane (APTES) and crosslinked by UV curing or a sol–gel reaction. Variations of the crosslinker functionality (f), subchain density (N), and hard segment content (HSC) produced systematic variations of the glass transition temperature (6–45 °C), accompanied by changes in the mechanical, dynamic mechanical and shape memory properties. More than 95% of shape fixity and 98% of shape recovery up to the fourth cycles were obtained with APTES crosslinked 3000M_c with 30% of HSC. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1473–1479     

Statistical and experimental investigation on low density microcellular foaming of PLA-TPU/cellulose nano-fiber bio-nanocomposites

This study dedicates to foaming of biocompatible blends of polylactic acid and thermoplastic polyurethane reinforced with bio-degradable cellulose nanofibers. This research primarily was associated with fabrication of PLA-TPU nanocomposites using a low weight fraction of cellulose nanofibers as a biodegradable reinforcement. Microstructural and mechanical properties of fabricated nanocomposites were examined and diffractometry was utilized to verify formation of percolated nanocomposites. Microcellular foaming was then performed with CO₂ as a blowing agent. Central composite design was applied in designing the experiments to evaluate the effects of main operating variables consisting of saturation pressure and time, heating time and foaming temperature. The results demonstrated that high saturation pressure and time promoted low cell diameters (below 5 μm) and high cell densities (above 10⁹ cell/cm³) due to the grown degree of crystallinity and higher PLA-TPU miscibility. Accordingly, adding TPU and CNF to the matrix create high crystalline foamed samples decorated with low bulk density.     

Stress–Strain Dependence of Segmented Polyurethanes and Polyurethane Ureas

The stress–strain dependences of segmented elastomers based on polyetherurethanes, polyesterurethane ureas, and polybutadieneurethane ureas were investigated. These dependences were adequately described using the generalized approach proposed earlier by the authors for amorphous elastomers. The experimental data obtained for four series of samples with chemical cross-linking confirmed an applicability of this approach for segmented elastomers. Unlike amorphous elastomers, the effective network density value was affected not only by the density of the chemical network, but the contribution of the network formed by the hard domains also needs be taken into account.     

Oxygen Barrier Properties of Waterborne Polyurethane/Silica Hybrids

The oxygen barrier properties of films obtained from waterborne polyurethane/silica hybrid dispersions were analyzed. Two different types of polyurethanes were used, based on poly(propylene glycol) and poly(1,4-butylene adipate). Three different strategies were followed in the preparation of the hybrid dispersions. In the first type of materials (series 1), the inorganic part came exclusively from the covalent incorporation of trifunctional silane groups into the polymeric chains. The other two series contained, in addition to the trifunctional silane groups, tetrafunctional silane groups either physically blended (series 2) or “in situ” generated (series 3). Materials of series 1 showed an increase of the oxygen permeability coefficient with the silane content. However, the other two types of materials presented just the opposite dependence. In this latter case, the systems containing “in situ” generated silica (series 3) presented higher permeability coefficient values, probably because of the steric hindrance imposed by the polyurethane that gave rise to silica networks containing silanol groups and free volume holes. Moreover, lower permeability coefficient values were obtained when larger size particles were added. This fact could mean that the polyurethane/silica interface effects were not totally hindered even when the organic/inorganic phases were covalently bonded.     

Study of Electrical Conductivity of Para-Toluene Sulfonic Acid Doped Polyaniline/Polyester-Based Polyurethane Blends in the S-Band Frequency Range

Conducting polymer blends were prepared using polyaniline doped with para- toluene sulfonic acid (PTSA-PANI) and a polyester polyol-based polyurethane (PU). The morphological, thermal and dielectric properties of the PTSA-PANI/PU blends in the frequency range of 1–5 GHz (S band) were investigated. It was found that the morphology of the samples was affected by the PTSA-PANI loading, resulting in the formation of agglomerates and pathways when above 10 wt%. The thermal stability of the composites was improved with increased PTSA-PANI loading. The electrical conductivity percolation threshold was obtained at 2.5% of PTSA-PANI loading and the electrical conductivity reached the value of 0.13 S/m at a PTSA-PANI loading of 30 wt%. The obtained results for the PTSA-PANI/PU blends prepared indicate a high potential for their successful use in electrical and electromagnetic applications.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Effect of Chain Length of Polyethylene Glycol and Crosslink Density (NCO/OH) on Properties of Castor Oil Based Polyurethane Elastomers

The equilibrium swelling study of polyurethanes (PU) was carried out in various solvents in order to calculate their solubility parameter. The kinetics of swelling and sorption have also been studied in 1,4‐dioxane at 30°C. The PU was synthesized by reacting a novel polyol (castor oil derivative and epoxy based resin, EpxR) and one of the polyethylene glycols (PEG 200, PEG 400, PEG 600) with different weight compositions, with a toluene diisocyanate (TDI) adduct (derived from toluene diisocyanate and R60 polyol). Different NCO/OH ratio viz. 1, 1.3 and 1.7 were employed in the study. The results were found to vary with the weight composition of polyol components, as well as the crosslink density of the samples. The sorption behavior is also found to vary with the molecular weight of polyethylene glycol employed in the preparations of the polyurethanes. Kinetic studies of swelling revealed that the sorption is anomalous in nature. The diffusion coefficient (D) increased with an increase in the NCO/OH ratio and decreased with an increase in chain length of polyethylene glycol. The sorption coefficient (S) decreased with an increase in crosslink density (NCO/OH) and increased with increasing polyethylene glycol (i.e., PEG 200, PEG 400, and PEG 600) moieties in the polyurethanes. The molecular weight between two crosslink points was calculated using the Flory Rehner equation (24), and hence, the number of chains per unit volume (N) and degree of crosslinking (ν) in all the samples were determined.     

Studies on the Particle Morphology of Waterborne Cationic Polyurethane/Polyacrylate Microemulsions

Polyurethane containing tertiary nitrogen atoms was synthesized from polyol, diphenylmethane diisoccyanate (MDI) and N‐methyl diethanolamine. The polymer was converted into cationomers by quarternizing with methacrylic acid (MAA) and then dispersed in water. In this reaction, methyl methacrylate (MMA) was used to decrease viscosity; at the same time, it was the monomer in the later reaction. Finally the cationic polyurethane dispersions were further polymerized with an oil‐soluble initiator, azobisisobutyronitrile (AIBN), water‐soluble initiator, K₂S₂O₈ (KPS) and the mixture of AIBN and KPS. The different emulsion particles with shell‐core structure, “invert” shell‐core structure and “irregular” sandwich structure were obtained; the morphological structures were characterized by TEM observation, FT‐IR and particle size analysis.     

Mechanical,Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites

The meta kaolin (MK) clay particulate filler with different weight ratios viz., 0, 5, 10, 20 and 30 wt% were incorporated into castable polyurethane (PU)/polystyrene (PS) (90/10) interpenetrating polymer network (IPN). The effects of MK particulate filler loading on the mechanical and thermal properties of PU/PS (90/10) IPN composites have been studied. From the tensile behavior, it was noticed that a significant improvement in tensile strength and tensile modulus as an increase in MK filler content. Thermogravimetric analysis (TGA) data reveals the marginal improvement in thermal stability after incorporation of MK filler. TGA studies of the IPN composites have been performed in order to establish the thermal stability and their mode of thermal degradation. It was found that degradation of all composites takes place in two steps. Degradation kinetic parameters were obtained for the composites using three mathematical models. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic (SEM) technique.     

Novel Ibuprofen‐based Polyurethane: A New Approach for Drug Delivery

Facile synthesis of novel ibuprofen bearing polyurethane 1 has been achieved for the first time and found to display the release pattern of ibuprofen based on the easy cleavage of ester linkages. Thorough characterizations (FT‐IR, UV‐Vis, NMR, and elemental analysis) were performed to ascertain the structure of polyurethane 1.