水相中磷钼酸催化三组分合成烯丙基胺

以磷钼酸作为催化剂，芳香醛、胺和三丁基烯丙基锡三组分在水作为溶剂，室温下高产率的得到相应的烯丙基胺。     

二苯并噻吩在分散型钼催化剂和原位产生的氢存在下的加氢脱硫Ⅲ. 催化剂前身物、硫化氢、一氧化碳和水对反应的影响(英)

研究了水／ 甲苯乳化液中二苯并噻吩（ 硫芴） 在分散型钼酸、磷钼酸和四硫钼酸铵催化剂存在下的加氢脱硫反应． 反应在高压釜中于３４０ ℃及三种不同的气氛即Ｈ２ ，Ｈ２／Ｈ２ Ｏ和ＣＯ／Ｈ２Ｏ（ＣＯ 和Ｈ２Ｏ 经水煤气转换反应（ ＷＧＳＲ） 产生原位氢） 的存在下进行． 用ＧＣ和ＧＣＭＳ鉴定、分析了气体和液体产物的组成． 结果表明： 对硫芴的加氢脱硫反应，在分散型四硫钼酸铵催化剂存在下，原位产生的氢的效果仅比加入的氢气稍好，而在分散型钼酸和磷钼酸催化剂存在下，原位产生的氢远比加入的氢气有效． 实验结果还表明： 硫化氢能显著提高分散型钼酸和磷钼酸催化剂的加氢脱硫活性，但在分散型四硫钼酸铵催化剂存在下，硫化氢能促进加氢反应而抑制氢解反应． 一氧化碳和水均选择性地抑制氢解反应．     

聚乙烯醇和丙烯酸-β-羟乙酯水凝胶的摩擦学特性

合成水凝胶是由水溶性单体聚合得到的轻度交联的高分子柔顺链网络 .高分子交联网络与水之间的相互作用决定着水凝胶的物理化学性质[1,2 ] .水凝胶常应用于生物医学材料和生物传感器等方面 .如接触眼镜的材料就常用甲基丙烯酸 -β-羟乙酯和聚乙烯醇 (PVA)为主要成分的水凝胶 ,所以对其摩擦性质的研究会丰富对生物医用材料的认识 .关于水凝胶的摩擦性质的研究 ,除 Osada等[3] 研究了聚乙烯醇及一些天然水凝胶在几牛顿到几十牛顿的负载下的摩擦行为外 ,尚少报道 .PVA水凝胶的结晶度对其性能影响甚大 ,但他们没有涉及结晶度与 PVA水凝胶的摩…     

Application of nanodiamonds in human body fluid analysis by matrix-assisted laser desorption/ionization mass spectrometry

Direct mass spectrometric analysis of complex biological samples is very important and challenging. In this paper, nanodiamonds have been successfully used in matrix-assisted laser desorption/ionization mass spectrometric analysis of human serum and urine. As a practical tool and platform, it can be widely used in the field of humoral proteomics, and it plays a very promising role in clinical diagnosis, including identification of novel disease-associated biomarkers.     

Fractionally differenced models for water quality time series

This paper deals with the selection and evaluation of statistical techniques for use in the modeling and forecasting of water quality time series. The focus is on statistical concepts relevant to the analysis of flows and concentrations. A selection of time series procedures has been used for auditing water quality archival data, including the screening of data sets, correlation and spectrum calculations, and iterative model fitting. A summary is provided of experience with analyzing archival data on the Niagara River and the use of a fractionally differenced model.This paper is the result of a study performed for the International Joint Commission, United States and Canada. The authors gratefully acknowledge the direction and support provided by Dr. Joel L. Fisher.     

Physicochemical quantities in catalytic reactions measured simultaneously by gas chromatography

Summary A small volume of reactant, 1-butene, is injected onto a catalytic bed and is allowed to diffuse away from it together with the product butane, along a narrow empty chromatographic tube; the latter is connected perpendicularly to the middle point of another similar tube through which hydrogen flows as reactant and carrier gas, transferring both 1-butene and butane to the detector through an analytical column. By using the reversed-flow GC technique, extra peaks are obtained in the chromatographic trace, sampling the concentration of both the readtant and product at the junction of the two tubes as a function of time. These concentrations are the result of the diffusion of the substances along the narrow empty tube, modified by the adsorption-desorption rates and the rate of the catalytic reaction. From the extra peaks of the reactant and product, a number of physicochemical quantities pertaining to the catalytic reaction can be calculated simultaneously, using appropriate mathematical analysis. These include adsorption rate constants, reaction rate constants, desorption rate constants, partition coefficients, and the overall mass transfer coefficients of the reactant across the gas-solid boundary of the catalytic bed. Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

Sampling and analysis of volatile organic compounds in air using a dualsorbent trap

Summary A dualsorbent trap containing graphitized carbon blacks was used for the collection of volatile and semi-volatile organic pollutants from the atmosphere of different workplaces and from an above-ground parking lot. The method proved to be sensitive, simple and reliable. Thermal desorption and solvent extraction methods followed by GC-MS analysis were employed.     

Synthesis and characterization of proton‐conducting copolyimides bearing pendant sulfonic acid groups

A series of sulfonated copolyimides (co‐SPIs) bearing pendant sulfonic acid groups were synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), bis(3‐sulfopropoxy) benzidines (BSPBs), and common nonsulfonated diamines via statistical or sequenced polycondensation reactions. Membranes were prepared by casting their m‐cresol solutions. The co‐SPI membrane had a microphase‐separated structure composed of hydrophilic and hydrophobic domains, but the connecting behavior of hydrophilic domains was different from that of the homo‐SPIs. The co‐SPI membranes displayed clear anisotropic membrane swelling in water with negligibly small dimensional changes in the plane direction of the membrane. With water uptake values of 39–94 wt %, they showed dimensional changes in membrane thickness of about 0.11–0.58, which were much lower than those of homo‐SPIs. The proton conductivity σ values of co‐SPI membranes with ion exchange capacity values ranging from 1.95–2.32 meq/g increased sigmoidally with increasing relative humidity. They displayed σ values of 0.05–0.16 S/cm at 50 °C in liquid water. Increasing temperature up to 120 °C resulted in further increase in proton conductivity. The co‐SPI membranes showed relatively good conductivity stability during the aging treatment in water at 100 °C for 300 h. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1545–1553, 2005