Investigation of nanoparticle generation during femtosecond laser ablation of metals

The production of nanoparticles via femtosecond laser ablation of gold and copper is investigated experimentally involving measurements of the ablated mass, plasma diagnostics, and analysis of the nanoparticle size distribution. The targets were irradiated under vacuum with a spot of uniform energy distribution. Only a few laser pulses were applied to each irradiation site to make sure that the plume expansion dynamics were not altered by the depth of the laser-produced crater. Under these conditions, the size distribution of nanoparticles does not exhibit a maximum and the particle abundance monotonously decreases with size. Furthermore, the results indicate that two populations of nanoparticles exist within the plume: small clusters that are more abundant in the fast frontal plume component and larger particles that are located mostly at the back. It is shown that the ablation efficiency is strongly related to the presence of nanoparticles in the plume.     

激光诱导等离子体的实验研究及其在光谱分析中的应用

综述了近几年国内外在激光诱导等离子体方面的实验研究进展 ,及其在光谱分析中的应用。着重阐明了在不同的条件下 (气体种类、环境气压、激光能量、波长、脉宽、功率密度、观测高度 )激光诱导等离子体的形成、辐射、电子温度、电子密度和扩散速度方面的实验研究 ;另外 ,激光诱导等离子体用于物质成分分析中 ,主要阐述了直接采集等离子体的辐射进行固态、液态和气态样品的分析以及激光烧蚀与ICP光源联用进行的光谱化学分析两个方面 ,并对影响分析精确度和检出限的因素进行了简要讨论     

三维层流等离子体射流中陶瓷颗粒的运动与加热

本文对带载气-颗粒侧向喷射的三维层流等离子体长射流中陶瓷颗粒的运动与加热进行了模拟研究,并与忽略载气喷射影响时的结果进行了比较。模拟结果表明,侧向载气喷射所引起的三维效应对颗粒行为有明显影响,陶瓷颗粒在等离子体射流中加热时颗粒内部可能出现相当大的温差,取决于环境参数,陶瓷颗粒表面温度可以高于也可以低于中心温度。     

Effects of in situ plasma treatment on optical and electrical properties of index-matched transparent conducting oxide layer

We investigated the effects of in situ plasma-treatment on optical and electrical properties of index-matched indium tin oxide (IMITO) thin film. To render the IMITO-coated surface hydrophilic and study the optical and electrical characteristics, we performed in situ oxygen plasma post-treatment without breaking vacuum. The 94.6% transmittance in the visible wavelength range (400-700 nm) increased on average to 96.4% and the maximum transmittance reached 98% over a broad wavelength range. The surface roughness and sheet resistance improved from 0.9 nm and 200 Ω/sq to 0.0905 nm and 100 Ω/sq, respectively, by in situ plasma post-treatment. We confirmed by contact angle measurement that the hydrophobic IMITO surface was altered to hydrophilic. The improved optical and electrical characteristics of in situ plasma-treated IMITO makes it adequate for high-resolution liquid crystal on silicon displays.     

High coercivity FePt-C bulk magnet processed by spark plasma sintering and hot deformation

A high coercivity of 11 kOe has been obtained in spark plasma sintered and hot-deformed Fe₅₃Pt₄₄C₃ bulk magnets. The origin for the high coercivity has been investigated using X-ray diffraction and transmission electron microscopy. The average grain size of the ordered phase was ∼100 nm, which is less than the single domain size of the L1₀-FePt phase. Fe₃C particles were found surrounding the L1₀-FePt grains, which suppress the grain growth. The L1₀ ordering is also found to increase in hot-deformed sample by annealing in a magnetic field of 10 T at 600 °C.     

Magneto-Galvanic Resonances in Hollow Cathode Discharge Lamps

The galvanic behavior of a hollow cathode discharge versus an external weak magnetic field is investigated. The application of this field leads to disordering of the self-aligned states, which is detected as a resonance in the discharge current, named the magneto-galvanic signal. A correlation magneto-galvanic signal–operating voltage-current point is established and attributed to Penning ionization. The contribution of the metastable Ne I 1 s₅ to the magneto-galvanic resonance is also verified.     

Microplasma Technology and Its Applications in Analytical Chemistry

Abstract

This review article describes some existing microplasma sources and their applications in analytical chemistry. These microplasmas mainly include direct current glow discharge (DC), microhollow-cathode discharge (MHCD) or microstructure electrode (MSE), dielectric barrier discharge (DBD), capacitively coupled microplasmas (CCμPs), miniature inductively coupled plasmas (mICPs), and microwave-induced plasmas (MIPs). The historical development and recent advances in these microplasma techniques are presented. Fundamental properties of the microplasmas, the unique features of the reduced size and volume, as well as the advantageous device structures for chemical analysis are discussed in detail, with the emphasis toward detection of gaseous samples. The analytical figures of merit obtained using these microplasmas as molecular/elemental-selective detectors for emission spectrometry and as ionization sources for mass spectrometry are also given in this review article.     

Effect of the structure of a graphite target on the parameters of carbon films obtained by the laser plasma method

We have used Raman light scattering and electron paramagnetic resonance methods to study carbon films obtained by laser plasma deposition, using different types of graphite targets. We have established that the films deposited in this way have a diamond-like structure and are a nanostructured composite containing clusters of both sp² and sp³-hybridized carbon. We have shown that an increase in structural perfection of the graphite target causes an improvement in the structure of the carbon films obtained from it and an increase in the content of sp³-hybridized carbon in it. Thermal stimulation of the substrate during application of a coating leads to the same effect. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 4, pp. 539–546, July–August, 2008.     

FEB-E动态气靶偏滤器的研究

在ＦＥＢ－Ｅ设计阶段,偏波器从开放式固定板靶优化为封闭式气体靶,以改善偏滤器的杂质控制和增加离子与气体的相互作用,通过喷气和注入杂质获得的部分脱靶等离子体形成了动态气体靶,喷气能降低删削层（ＳＯＬ）处等离子体温度,沪入的杂质增加了ＳＯＬ处的辐射功率,使靶板的负载降低,用ＮＥＷＴ１Ｄ编码模拟了ＳＯＬ处等离子体和杂质（硼杂质）的输运,得到了杂质、等离本温度和等离了体密度分布。着眼于杂质的滞留物辐射,优     

激光差拍波等离子体加速装置中约束磁场的计算研究

通过对等离子体发生器建立三维模型,计算得到磁场在该装置中的分布情况。所得结果与实际测量基本一致,从而说明所建模型的合理性。通过调节一些参数,对该模型进一步搞清了导致等离子体发生器中真实磁场较实验设计要求偏低的主要原因,并提出了相应的改进方案。