旋流煤粉燃烧的一维综合数值模拟

发展了综合考虑气－固两相旋流流动，气相燃烧，颗粒相变与燃烧及两相辐射传热的旋流煤粉燃烧－维数学模型，给出了气－固两相能量方程中颗粒相就源项的计算表达式，应用这一模型对涡旋燃烧炉环形通道内多组工况的旋流气体燃烧和煤粉燃烧进行了数值模拟，计算得到的炉内温度分布和燃烧效率与实验数据基本相符，表明本文建立的模型可用于旋流煤粉燃烧的一维综合数值模拟。     

热处理及与KOH共炭化对深度脱除煤中无机矿物质的促进作用

研究了煤经热处理（炭化）以及煤与ＫＯＨ共炭化对酸洗脱灰的影响。结果表明，煤经炭化再用盐酸洗涤，可以在缓和的条件下大幅度提高酸洗脱灰率；煤与ＫＯＨ共炭化后再酸洗，不仅对煤中的粘土、黄铁矿等无机矿物质有很好的效果，还特别适于脱除在一般情况下都难以除去的石英矿物。     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Identification of oxygenated polycyclic aromatic hydrocarbons in diesel particulate matter by capillary gas chromatography and capillary gas chromatography/mass spectrometry

Summary Using a two-step liquid chromatographic separation on normalphase cartridges, crude extracts of diesel particulate matter can be separated without time-consuming sample handling into special fractions which mainly contain slightly-polar oxygenated polycyclic aromatic hydrocarbons (oxy-PAH) and nitrated polycyclic aromatic hydrocarbons (nitro-PAH). Subsequent analysis was by fused-silica capillary gas chromatography on a SE54 column along with flame-ionisation (GC/FID) and positive-ion electron-impact mass spectrometric detection (GC/MS) respectively. A number of individual oxy-PAH belonging to four different chemical classes (ketones, quinones, anhydrides and aldehydes) and several individual nitro-PAH were characterized by their retention times and mass spectra. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Modeling of plasma jets with superimposed vortex flow

This work is concerned with analytical studies of thermal plasma jets, which are finding increasing interest for thermal plasma processing. A two-dimensional model for turbulent plasma jets with superimposed vortex flow has been developed, incorporating multiple time scales for velocity and temperature fluctuations and a density-weighted averaging for the density fluctuation effect. Results show that adding swirl to the flow field for confined and free jets induces strong axial and radial pressure gradients near the nozzle exit, causing a rapid decay of the axial velocity with increasing distance from the nozzle. Comparisons with cold flow show similar trends close to the nozzle exit, but further downstream, the axial velocities increase again, especially for larges swirl numbers. Comparisons of theoretical predictions based on the present model with available experimental data are, in general, in reasonable agreement.     

Capillary electrophoresis determinative and GC-MS confirmatory method for water-soluble organic acids in airborne particulate matter and vehicle emission

Urban fine airborne particulate matter (PM2.5) and vehicle emission samples were studied for water-soluble low-molecular-weight carboxylic acids using CE with indirect UV detection. Further identification of these acids was achieved using GC-MS as their butyl esters (after derivatization with BF3/butanol). Several dicarboxylic acids in the range C2-C10 including straight-chain, branched-chain, cis- and trans-unsaturated, and aromatic acids were confirmed by GC-MS. In addition, aromatic acids such as benzoate, phthalate, terephthalate, isophthalate, and 4-methylphtalate were present in such samples, but some of these were not well resolved by the used CE method. Oxocarboxylic acids (Cn(w) with n > 4) were also identified by GC-MS but not determined by CE due to lack of standards. The rapidity and simplicity of the CE method were clearly demonstrated, and the method was observed to be advantageous for routine monitoring of water-soluble organic acids in airborne PM2.5 and vehicle emission at low microg/L levels.     

Shock-wave equation-of-state studies at Los Alamos

A history of the shock-wave equation-of-state (EOS) studies at Los Alamos is given. Particular emphasis is placed on the pioneering research in the 1950s where many of the experimental techniques and methods of analysis were developed, which we now take for granted. A brief review of shock-wave physics is given, which illustrates important hydrodynamic and thermodynamic concepts. Recent studies on the EOS of Ti are presented with emphasis on the-to- phase transition. VISAR wave profiles for polycrystalline Ni and singlecrystal Ni are presented to determine the strengths of these materials under pressure. Low-density polystyrene foam Hugoniot experiments are described and results analyzed.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

The effect of a coriolis force on Taylor-Couette flow

Taylor-Couette flow subject to a Coriolis force is studied experimentally and numerically. In the experiment, the Couette apparatus is mounted on a turntable with the axis of the cylinders orthogonal to the rotation vector of the turntable. The Coriolis force stabilizes the fluid against the onset of Taylor vortices and alters the velocity fields, both above and below the transition from the initial flow. At small dimensionless turntable frequencies, the transition yields time-independent Taylor vortices which are tilted with respect to the cylinder axis. At larger there is a direct transition to turbulence. We determine the first-order correction to the classical Couette initial flow, to account for the effects of the Coriolis force, by expanding in powers of. We present numerical results for the axial velocity (the only nonvanishing correction term to order) in the infinite-cylinder approximation.     

Determination of butyltins in environmental samples using sodium tetraethylborate derivatisation: characterisation and minimisation of interferences

Interferences affecting the determination of butyltin species by sodium tetraethylborate (STEB) derivatisation followed by purge-trap preconcentration were systematically studied using synthetic solutions, natural water samples and sediment extracts. Substances that did not cause interferences included most common cations (apart from those metal ions listed below), anions, metalloids and polar organic compounds. Natural organic matter (NOM) specifically interfered with tributyltin (TBT) due to a mechanism involving partitioning of the butyltin to the hydrophobic portions of the NOM. The metal ions Ag(I) (≥2 μM), Cd(II) (≥2 μM), Cu(II) (≥0.5 μM) interfered predominantly with the determination of monobutyltin (MBT) due to catalytic degradation of the STEB reagent. Pb(II) (≥14 μM) interfered with butyltin determination by an unknown mechanism. Other interferences to the purge-trap method were shown to occur in the presence of chelating agents (e.g. EDTA) or hydrophobic liquids such as diesel fuel. A mixture comprising methanol (MeOH), EDTA and Mn(II) was used to partially mask the effect of interfering NOM and metals. Spike recoveries (mean±S.D. of n=7 different samples) of MBT, dibutyltin (DBT) and TBT in contaminated natural water samples were improved from 70±36,90±11 and 91±24 to 102±10,98±3 and 98±4%, respectively. Spike recoveries (mean±S.D. of n=5 different samples) of MBT, DBT and TBT in aliquots of sediment extracts were improved from 86±17,79±18 and 59±32 to 97±6.2,103±3.6 and 103±5.0%, respectively. The ability to analyse larger aliquots of sediment extracts in the presence of the masking mixture improved the detection limit four-fold if MBT and DBT determination was required and 10-fold if only TBT determination was required.     

Determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter collected with low volume samplers

The determination of polycyclic aromatic hydrocarbons (PAHs) contained in samples of particulate matter (PM), collected with low volume pumps, were carried out with an high sensitivity method that comes from several revisions of a previous method. The present work describes how, by using programmable temperature vaporization (PTV) and a mass selective detector with inert ionic source for the GC-MS analysis and the modifications of microwave-assisted extraction (MAE), the sensitivity of the method can be increased.The PAHs chosen for testing the method are: benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene (Ip) and dibenzo[a,h]anthracene (DbA). They, in fact, belong to that group of substances that are the most harmful for human health for their carcinogenicity.PAHs recoveries for spiked standard solutions at different concentrations were between 95 and 100% with relative standard deviation ranging from 1 to 3%. The revised method was validated using a 1649a urban dust standard reference material (SRM). The results obtained were in good agreement with certified values. The high sensitivity of the method allows to carry out analyses using only a half of the sampled filter (usually 47 mm diameter membranes). In this way, the other half can be used for the characterization of the other components of PM (heavy metals, organic carbon, ions, etc). The last step has been constituted by application of the optimized method on real samples collected in two cities located in Southern Italy (Bari and Taranto).