一种视频图像规则圆目标的超分辨率位置测量方法

介绍了一种用于视频图像规则圆目标的超分辨率位置测量方法。分析了超分辨率测量的原理 ,并提出和完成了测量方案 ,取得了满意的结果。首先在目标静止时 ,连续采集多帧视频图像 ,通过叠加平均进行降噪 ;其次通过罗伯特微分算子进行边界探测 ,求出目标的大致位置 ;最后通过边界重心拟合法、边界圆拟合法和最小二乘法拟合求出目标的精确位置。理论分析和实验表明 ,完整圆目标时 ,测量精度可达 1/4像素 ;而当目标图像有缺陷时 ,边界圆拟合法和最小二乘法拟合测量误差增加较少 ,边界重心法的测量误差增加较多。在具体情况下 ,算法及参数应该作相应的调整     

An electromagnetic parameters extraction method for metamaterials based on phase unwrapping technique

Abstract

A new method of extracting effective permittivity and permeability of metamaterials has been developed in this paper. Scattering parameters are used to represent effective wave impedance and refractive index of the metamaterials. Considering analytical continuation of effective refractive index of the metamaterials in the upper half of a complex angular frequency plane, a phase unwrapping technique has been implemented to solve branch ambiguity of the refractive index caused by complex inverse cosine function. An empirical formula to estimate the starting frequency in the phase unwrapping technique has been developed to improve the efficiency of the parameter retrieval procedure. Numerical results including five slabs of rods and split-ring resonators (SRRs) and a structure composed of two SRRs and four capacitively loaded strips are given to demonstrate good accuracy, high efficiency, and noise insensitivity of the proposed retrieval method.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

基于FPGA的视频信号数字化光纤传输实验接收装置的设计与实现

介绍了以FPGA为主控芯片,以光纤为通讯媒介的视频信号数字通信实验装置的设计实现过程,并对电路各个模块的功能及实现加以说明.电路在Altium Designer中设计完成,采用分模块式的设计,结构清晰,易于实现.在QuartusⅡ环境下用VerilogHDL语言进行编程并对程序进行仿真.该装置已做成了实体,可以实现视频信号的传输.     

D形截面环流器中的磁面及LHCD的研究

本文利用环形系统的Ｇｒａｄ－Ｓｈａｆｒａｎｏｖ方程得到了Ｄ形截面的托卡马克磁面位形，并利用射线追踪技术研究了Ｄ形磁面位形下低杂波的运动形态。定性地研究了Ｄ形磁面位形下利用低杂波驱动电流的可行性，优化地给出了驱动电流的最佳方式。     

鲁棒的车载红外视频电子稳像算法

针对车辆行进中,红外热像仪拍摄的视频序列存在复杂的随机抖动,提出基于BRISK特征点匹配的运动估计算法,计算出高精度全局运动矢量,同时对于特征点匹配时出现误匹配及场景中存在前景运动物体的情况,采用模糊聚类法分离全局运动和局部运动,提高了算法的鲁棒性。提出了基于Kalman粒子滤波算法,有效实现了复杂扫描运动和随机抖动的分离,并利用双线性插值法进行图像补偿。采用快速图像拼接法进行未定义区域处理,实现了图像全景输出。还利用车载红外热像仪实际拍摄的红外视频进行了稳像实验。实验结果表明,视频序列获得了很好的稳像效果,能够满足实际应用要求。     

无线视频传感阵列低复杂度多视点视频编码方案

基于网络中心节点的运动矢量外推技术,提出了一种无线视频传感阵列的低复杂度多视点视频编码方法。该方法考虑到密集型视频传感阵列各视点间通信复杂、布线繁重、且位于各相机节点内的编码器由于计算能力、功耗等限制难以完成复杂的编码过程等特点,利用运动矢量外推逼近技术将大量的运动估计运算从视频编码端移到了网络中心节点,使得新编解码框架下编码器的运动估计的计算复杂度只有传统全搜索运动估计运算的0.3%,降低了系统传感阵列编码端功耗。实验结果表明,该方法的率失真性能比H.264-I帧高出4 dB以上,接近H.264-P帧编码,优于基于Wyner-Ziv理论的分布式多视点视频编码方法。     

一种采用JPEG标准的实时视频图像压缩处理系统

本文重点探讨了在设计ＪＰＥＧ视频压缩应用系统时，应着重考虑的几个重要技术问题，并介绍了一种采用以ＰＣ为平台，以ＣＬ５５０视频压缩处理器和８２Ｃ９００１视频窗口控制器为基础的实时视频图像压缩处理系统。描述了该系统总体构成，深入讨论了图像数据缓冲存储和压缩速率控制等关键技术问题。     

Normal tracing deflectometry using a secondary light source

Scanning deflectometric profilers based on an f–gθ system are typical optical tools used to measure mirror profiles at many synchrotron facilities. Unlike these profilers, which are based on a pencil beam, here a secondary light source and a pinhole are used to construct a system that automatically selects a beam that will always pass through the pinhole and propagate along the normal direction of the measured area on the surface under test. By measuring the angle variation of the selected beam, slope variations of the surface under test can be measured. Systematic errors introduced by manufacturing defects or aberrations of an optical element, which greatly degrade the performance of traditional profilers, could be minimized by using the developed method. Simulation values of the proposed method and a conventional method are compared.     

立体影像显示原理及其技术发展

阐述了立体显示的原理,着重介绍了处于研究热点的光学板遮挡、体积型立体显示和电子全息立体显示技术的原理及其技术发展状况.