Experimental study of light diffraction by standing ultrasonic wave with cylindrical symmetry

We report a new acousto-optic arrangement based on ultrasonic wave with cylindrical symmetry. The theory of light interaction with standing cylindrical ultrasonic wave is experimentally verified in the Fraunhofer region. A very good agreement of experimental results with numerical calculations based on the proposed theory is found. The diffraction pattern consists of ring-shaped diffraction orders which posses a fine structure. The time average light intensity of the whole zeroth diffraction order as a function of the Raman-Nath parameter is investigated. The modulation properties of presented system are examined by means of single photon counting technique. Finally, some potentially useful applications in the laser and fibre technology are suggested.     

低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

The structure of monolayer SiO2 on Mo(1 1 2): A 2-D [Si-O-Si] network or isolated [SiO4] units?

In this letter, atomically resolved scanning tunneling microscopic (STM) images obtained from monolayer SiO₂/Mo(1 1 2) are presented. The results are consistent with a previously proposed structural model of isolated [SiO₄] units based on vibrational features observed by high-resolution electron energy loss spectroscopy (HREELS) and infrared reflection-absorption spectroscopy (IRAS), and oxygen species identified by ultra-violet photoemission spectroscopy (UPS). These results are inconsistent with a structural model that assumes a two-dimensional (2-D) [Si-O-Si] network. These data illustrate that a metal substrate, although coated with an oxide thin layer, can be directly imaged at the atomic-scale with STM.     

Absorption Complex between Porphyrin and Phenothiazine in Reverse Micelles

Porphyrin derivatives attract much more interest in photodynamic therapy (PDT). Their importance as therapeutic drugs and targeting agents has been widely recognized1, and many of the efforts have been put towards crafting new porphyrin-based molecular entities to achieve enhanced tumor localization, better tissue penetration and increased singlet oxygen quantum yield2. The states of porphyrins in tissue models such as micelles, lipid bilayers are extensively investigated focusing more or l…     

VOn±(n=0,1,2)的势能函数与光谱常数研究

用密度泛函B3LYP/6-311++G(d,p)方法和相对论有效实势(Lanl2dz基组)对VO^n±(n=0,1,2)分子离子的势能函数及光谱常数进行了分析. 结果表明它们都能稳定存在, 其基态电子状态分别是:⁴Σ(VO^2-), ³Σ(VO^-), ⁴Σ(VO), ³Σ(VO⁺)和²Σ(VO²⁺). 其中VO^2-和VO²⁺的势能函数曲线呈“火山口”型, 属于亚稳态分子离子. 用七参数Murell-Sorbie势拟合VO^2-和VO²⁺分子亚稳态双原子分子离子势能函数, 发现其拟合曲线与势能函数曲线符合得很好. 同时,讨论了电荷对势能函数和能级的影响. 关键词： 分子离子 密度泛函理论 势能函数 能级     

Adhesive-free bonding of Zerodur glass to silicon

This work demonstrates anodic bonding of Zerodur glass having very low co-efficient of thermal expansion (CTE) to Si, Zerodur glass to thermally grown silicon dioxide on silicon and Pyrex glass to Ge. Bonding results, using point cathode contact and plate cathode contact configurations, are discussed. Bonding parameters, i.e. applied dc voltage, temperature and bonding time were determined. Heating and cooling rates for crack-free bonding of Zerodur glass were also determined.     

Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Preparation of activated carbons from cherry stones by activation with potassium hydroxide

Using cherry stones, the preparation of activated carbon has been undertaken in the present study by chemical activation with potassium hydroxide. A series of KOH-activated products was prepared by varying the carbonisation temperature in the 400-900 °C range. Such products were characterised texturally by gas adsorption (N₂, −196 °C), mercury porosimetry, and helium and mercury density measurements. FT-IR spectroscopy was also applied. The carbons prepared as a rule are microporous and macroporous solids. The degree of development of surface area and porosity increases with increasing carbonisation temperature. For the carbon heated at 900 °C the specific surface area (BET) is 1624 m² g⁻¹, the micropore volume is 0.67 cm³ g⁻¹, the mesopore volume is 0.28 cm³ g⁻¹, and the macropore volume is 1.84 cm³ g⁻¹.     

Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.