Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.     

单层光学薄膜中薄膜－衬底体系的双重干涉效应及其应用

提出了单层光学薄膜中薄膜与衬底反射光之间的双重干涉效应的理论，实验结果证实了理论分析的正确性。双重干涉效应使薄膜－衬底体系的热致反射调制度高达８０％，这一效应可望有极广泛的应用     

Molecular deposition film of porphyrin and phthalocyanine bearing oppositely charged substituents

Ｔｈｅｆｏｒｍａｔｉｏｎｏｆａｎｅｗｔｙｐｅｏｆｓｅｌｆ＿ａｓｓｅｍｂｌｅｄｍｕｌｔｉｌａｙｅｒｆｉｌｍｓ,ｍｏｌｅｃｕｌａｒｄｅｐｏｓｉｔｉｏｎ(ＭＤ)ｆｉｌｍｓ[1,2],ｉｓａｆａｓｔｄｅｖｅｌｏｐｉｎｇａｒｅａｏｆｔｈｉｎｆｉｌｍｒｅｓｅａｒｃｈ.Ｔｈｉｓｎｅｗｍｅｔｈｏｄｏｆｆｉｌｍｐｒｅｐａｒａｔｉｏｎｉｓｂａｓｅｄｏｎｉｏｎｉｃａｔｔｒａｃｔｉｏｎｂｅｔｗｅｅｎｏｐｐｏｓｉｔｅｃｈａｒｇｅｄｃｈｒｏｍｏｐｈｏｒｅｓ.ＩｎｃｏｍｐａｒｉｓｏｎｗｉｔｈｔｈｅｃｌａｓｓｉｃＬａｎｇｍｕｉｒ＿Ｂｌｏ…     

有机硅耐磨透明涂层的固化分析

ＦＴＩＲ、ＴＧ、ＴＢＡ等对有机硅耐磨涂料（有机硅溶胶）的热固化过程研究表明有机硅胶体中缔合羟基间的脱水缩合速率很高；羟基脱水程度与固化温度有关，温度越高，达平衡时羟基的浓度越低，在１０５～１３０℃间羟基的浓度变化最大，加入适当的固化剂，对羟基的脱水交联有促进作用，在较高的固化温度下，反应体系中出现了环氧环异构化产生的酮羰基的吸收峰     

Preparation and Properties of Anti-Reflection/Anti-Static Thin Films for Cathode Ray Tubes Prepared by Sol-Gel Method Using Photoirradiation

A new technique for preparing anti-reflection/anti-static thin films for CRTs at low temperature has been developed. Double-layered films of SiO₂/SnO₂ were formed on a CRT panel surface by the sol-gel method using photoirradiation. The new method makes it possible to reduce heat treatment temperature (°C) by almost 50% and treatment time to approximately 33% of the conventional levels.     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

氧化钨薄膜微型电化学器件的研究

本文论述了WO_3薄膜氢离子敏器件的结构、原理、制备技术和测试分析。利用WO_3薄膜在H+溶液中由绝缘转化为导电特性,成功地研制成氢离子敏器件。这是一种简易而经济的微型pH敏器件技术。     

酞菁锰-表面活性剂薄膜电极的电化学表征及其对三氯乙酸的电化学催化作用的研究

将酞菁锰（ＭｎＰｃ）掺入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）的氯仿溶液，并涂布于热解石墨电极表面，待氯仿挥发后即制得ＭｎＰｃ－ＤＤＡＢ薄膜电极。循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有两对还原氧化峰，第一对峰的Ｅｐｃ１＝－０．２７Ｖ，Ｅｐａ１＝０．０１Ｖ；第二对峰的Ｅｐｃ２＝－０．７６Ｖ，Ｅｐａ２＝－０．６２Ｖ（ｖｓ．ＳＣＥ）。本文着重探讨了第二对峰的电化学行为，估计了该体系的电荷传递扩散系数Ｄｃｔ和表观非均相电极反应速率常数Ｋ０′等电化学参数，并可将该薄膜电极用于催化三氯乙酸的电化学还原。     

吲哚衍生物与花生酸混合LB膜的制备及结构研究

本文将3-三氰基乙烯基-N-十六烷基吲哚与花生酸混合制成单分子膜。不同摩尔比混合膜的π-A曲线均出现平台,表明膜压缩过程中分子排列相态发生变化。混合LB膜的紫外吸收光谱证明吲哚分子形成聚集体,X-射线衍射结果说明这种聚集体被夹带在花生酸的框架结构中。