第五讲新型光纤水听器和矢量水听器

光纤水听器和矢量水听器作为当前水声研究领域最具有代表性的两大技术倍受业界关注。光纤水听器的重要贡献在于，从一个全新的角度出发，试图解决传统的水声传感和声纳数据传输一体化设计和实现的一系列问题，这有助于改善声纳系统的可靠性，并且有可能降低其制造、使用和维护的总成本。矢量水听器则由于其特有的指向性和矢量一相位处理方法，在低频和甚低频水声微弱目标探测方面具有潜在的优势．经过不懈的努力，光纤水听器和矢量水听器系统已经从实验室逐渐进入到工程应用阶段．这些对未来声纳系统的发展会产生相当重要的影响．文章尝试从声纳设计的角度对这两者的技术现状进行简要综述，包括它们各自的物理基础、工作原理、关键技术和应用领域．     

压差式矢量水听器方位估计中的干扰抵消

矢量水听器由于能获取声场中标量（声压）和矢量（振速）信息，因此单个的矢量水听器就可实现目标方位估计。单个矢量水听器是利用信号的声压和质点振速之间相关性进行信号方位估计，但是当存在干扰，并且干扰和信号之间相关时，如果对运用能量流进行方位估计的方法不加改进，则会出现很大的误差，甚至出现错误的估计。本文提出一种存在已知噪声干扰情况下的干扰抵消方法，并针对该方法进行了仿真试验，最后运用湖试数据进行了验证。结果表明，该方法能有效地减弱相千千柑对信号的影响，实现对信号的方位估计。     

Self-marking phase-stepping electronic speckle pattern interfometry (ESPI) for 3D displacement measurement on cathode ray tube (CRT)-panels

This study demonstrates the feasibility of applying phase-shifting electronic speckle pattern interfometry to measure the deformation field of the front panel of a cathode ray tube, to support analysis to enhance the implosion-resistance capacity under violent collapse. Two effects, the air exhaustion and shrink band constraint effects, are comprehensively investigated. The angle of an adjustable mirror is switched, to provide three sensitivity vectors that are required in 3D-displacement measurement. A Fourier filtration is employed to remove speckle noise and establish a noise-free phase map. Inconsistent points are identified and masked to prevent any possible divergence during phase unwrapping. The results show that the accuracy of this method is satisfactory.     

A design of novel type superconducting magnet for super—high field functional magnetic resonance imaging by using the harmonic analysis method of magnetic vector potentials

The approach of expanding the magnetic scalar potential in a series of Legendre polynomials is suitable for designing a conventional superconducting magnetic resonance imaging magnet of distributed solenoidal configuration. Whereas the approach of expanding the magnetic vector potential in associated Legendre harmonics is suitable for designing a single-solenoid magnet that has multiple tiers, in which each tier may have multiple layers with different winding lengths. A set of three equations to suppress some of the lowest higher-order harmonics is found. As an example, a 4T single-solenoid magnetic resonance imaging magnet with 4×6 layers of superconducting wires is designed. The degree of homogeneity in the 0.5m diameter sphere volume is better than 5.8 ppm. The same degree of homogeneity is retained after optimal integralization of turns in each correction layer. The ratio B_m/B₀ in the single-solenoid magnet is 30% lower than that in the conventional six-solenoid magnet. This tolerates higher rated superconducting current in the coil. The Lorentz force of the coil in the single-solenoid system is also much lower than in the six-solenoid system. This novel type of magnet possesses significant advantage over conventional magnets, especially when used as a super-high field functional magnetic resonance imaging magnet.     

Broadband Analysis of Holographic Power Combining Circuits

Holography is a promising technique for power combining applications in the frequency range of short millimeter and submillimeter waves. In this paper, quasi-optical holographic power combining circuits are investigated. An equivalent network is utilized which rigorously models horn arrays and biperiodic dielectric structures in order to design computer-generated holograms. We apply the network model to a 5-element quasi-optical power combiner and demonstrate its capability. The hologram is designed for 150 GHz and has an efficiency of 92.5 % with a 90 % bandwidth of 5.3 %. With the aid of a broadband waveguide power divider and a vector field measurement system, the circuit is analyzed.     

基于自适应核学习相关向量机的乳腺X线图像微钙化点簇处理方法研究

采用自适应核学习相关向量机方法, 结合形态学滤波和Kallergi分簇标准, 研究了乳腺X线图像中微钙化点簇的处理. 首先将微钙化点检测看作一个监督学习问题, 然后应用自适应核学习相关向量机作为分类器判断图像中每一个位置是否为微钙化点并采用形态学处理滤除干扰噪声, 最后对获得的微钙化点采用Kallergi标准进行分簇. 为提高运算速度, 在微钙化点检测时将整个图像分解为多个子图像并行运算, 实现了一种基于自适应核学习相关向量机的微钙化点簇快速处理方法. 实验结果和分析表明, 自适应核学习相关向量机方法算法性能优于相关向量机方法, 特别是实现的快速方法能进一步降低微钙化点簇的处理时间. 关键词： 乳腺X线图像 微钙化点簇 相关向量机 自适应核学习     

水体重金属激光诱导击穿光谱定量分析方法对比研究

建立了适用于激光诱导击穿光谱探测的多元线性回归、神经网络回归和支持向量机回归三种定量反演算法模型, 以水体重金属Ni为例进行了回归实验测试和对比分析. 多元线性回归、神经网络回归和支持向量机回归的平均相对标准偏差分别为7.60%, 4.86%, 2.35%; 最大相对标准偏差分别为23.35%, 15.20%, 8.29%; 平均相对误差分别为25.98%, 10.58%, 2.72%, 最大相对误差分别为116.47%, 47.38%, 9.89%. 研究为进一步实现水中痕量金属元素的快速定量分析提供了方法和数据参考. 关键词： 光谱学 激光诱导击穿光谱 支持向量机回归 重金属     

离散式任意充磁角度Halbach永磁电机解析模型研究

Halbach电机因其自身优势在新型船舶推进、海洋洋流发电等方面受到广泛关注. 本文在假设铁磁材料线性和定子内表面光滑的条件下, 通过将任意充磁角度Halbach阵列等效为两组90° Halbach(或180° Halbach)阵列的矢量合成, 提出了一种分析离散式任意充磁角度Halbach永磁电机气隙磁场的解析方法; 通过对电机中磁标量势的傅里叶级数进行计算, 推导出了最简单的90° Halbach永磁电机在极坐标系下的气隙磁密表达式, 并在此基础上, 给出了任意充磁角度Halbach电机永磁体磁化强度在一个极下的表达式, 进而得出任意充磁角度Halbach电机气隙磁密的分布, 并分析了气隙磁密与电机极对数、永磁体厚度和充磁角度间的关系. 最后通过有限元和试验结果验证了本文方法的正确性. 关键词： 离散式Halbach电机 任意充磁角度 矢量等效 解析模型     

弹光调制器准单色光波偏振测量与仿真

弹光调制器(Photoelastic Modulator,PEM)互差频调制的新型偏振测量方法,能够同时实现三个斯托克斯光谱偏振参数测量,克服了现有方法的无法用阵列探测器有效采集,调制频率高的缺点,保留了原有弹光调制器偏振测量的优点。文章以光学系统的准单色光的偏振特性以及常用的偏振分析方法为基础,引入了Stokes矢量来表示入射光波的偏振特性。分析了弹光调制器实现偏振测量新方法的原理,利用三个弹光调制器工作在互相差异的频率上,对偏振光进行差频调制,产生载有偏振信息的低频分量,再通过锁相放大即可得到偏振信息,并给出利用MATLAB模拟仿真实现Stokes参量复原的过程。理论分析及仿真结果证明了该方法在理论上的可行性。