CO2氧化异丁烷制异丁烯用Pd/V2O5-SiO2催化剂

 利用表面化学反应改性法制备了不同V2O5负载量的V2O5-SiO2表面复合物载体,进而采用等体积浸渍法制备了负载型Pd催化剂. 用N2吸附、 X射线衍射、透射电镜、 X射线光电子能谱、程序升温脱附、化学吸附-红外光谱和微反技术对系列Pd/V2O5-SiO2催化剂的比表面积、晶相结构、价态、异丁烷的化学吸附性能和CO2部分氧化异丁烷制异丁烯的催化性能进行了研究. 结果表明, Pd/V2O5-SiO2催化剂中的钒以V5+形式存在, V5+在催化剂表面形成活性位V=O, 其中 V=O 晶格氧与 i-C4H10分子的-CH3 和-CH 中的H产生化学吸附作用; 催化剂中金属Pd与V4+协同作用使CO2在催化剂上产生了卧式吸附态; 晶格氧参加了催化氧化反应,催化剂中 V5+←→V4+ 的变化构成了催化反应的氧化还原过程. 在525 ℃, CO2/i-C4H10体积比为1和空速为 1200 h-1的条件下,以Pd/25%V2O5-SiO2为催化剂时异丁烷转化率为22.8%, 异丁烯选择性为89.1%.     

Effect of the extent of reduction of V2O5 on the adsorption of propylene and the oxidative dehydrogenation of propane to give propylene on V2O5 and V2O5/TiO2-SiO2

An increase in the propylene output in the oxidative dehydration of propane on V₂O₅/TiO₂-SiO₂ was observed after prior reduction of V₂O₅ in the reaction mixture to V₂O₄, which reduces the destructive chemisorption of propylene. A low titanium dioxide content in TiO₂-SiO₂ hinders the deep reduction of V₂O₅ to V₂O₃, which reduces the conversion of propane. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 373–378, November–December, 2007.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Preparation and characterization of nitrogen-doped titanium dioxides

A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated.     

钒氧化物电极材料晶格呼吸现象原位探测及其反应机制研究

作为锂离子电池正极材料,层状钒氧化物具有优异的物理特性和良好的储锂性能,因此被广泛研究与应用于工业生产与日常生活的各个方面.然而,在脱嵌锂的过程中,V₂O₅凝胶等层状钒氧化物的层状结构存在“晶格呼吸”现象.这种现象导致了电极材料的钝化,并进一步导致电池容量快速衰减.采用了原位X射线衍射（XRD）来研究一种层状钒氧化物（VO_x）在充放电过程中的“晶格呼吸”现象,揭示了其独特的相变过程.在充放电过程中,原位XRD对应的二维衍射图显示出三个不同的阶段,分别对应三个固溶反应.放电过程中,三个阶段的衍射峰都向高角度偏移,表明在锂离子嵌入过程中,VO_x的层间距存在持续收缩过程.（001）层间距大小随充放电过程的变化图进一步证明了这三个过程的不连续性.这些发现揭示了这类材料在电极反应过程中的晶体结构变化规律以及造成其容量衰减的原因.     

花球状二硫化钒的制备及其储锂研究

采用一步水热法并添加表面活性剂聚乙二醇400制备出花球状二硫化钒,利用X射线粉末衍射仪、场发射扫描电子显微镜等方法对产物的物相和形貌进行了表征. 观测生长过程发现花球状二硫化钒由若干六边形二硫化钒纳米片堆叠穿插组成,该花球状结构使材料拥有较高的比表面积及出色的结构稳定性. 将花球状二硫化钒用于锂离子电池正极材料测试,结果表明花球状二硫化钒在电压区间为1 ~ 3 V,电流密度为200 mA·g^-1时具有出色的循环稳定性且循环50周之后容量可达450 mAh·g^-1.     

Cationic complexes of Eu(III) and Sr(II) with diphosphine dioxides in organic extracts

IR spectroscopy was used to study the structure and composition of Eu(III) and Sr(II) complexes formed by cation-exchange extraction of these metals from their aqueous nitrate solutions with dichlorethane solutions of mixtures of chlorinated cobalt(III) dicarbollide (CCD) as a superacid with diphenyldiphosphine dioxides containing a methyl (Me-DPDO), ethyl (Et-DPDO), or polyoxyethylene bridge between two phosphorus atoms of phosphine oxide groups. At molar ratios DPDO/CCD ≤ 1, [Eu(H₂O)_nL₄]³⁺ complexes are formed in organic phases, whereas with an excess of DPDO relative to CCD, Eu(NO₃)L ₄ ²⁺ complexes are formed, where L = Me-or Et-DPDO. Polyoxyethylenediphosphine dioxide forms anhydrous complexes of composition Eu:L = 1:1 and 1:2 with Eu(III) and outer-spheric complexes of composition Sr:L = 1:1 and 1:2 with Sr(II), where the organic ligand molecules envelop the hydrated Sr(H₂O) _n ²⁺ cation. The peculiarities of extraction of the complexes are explained based on data about their composition and structure.