Hydrothermal Synthesis and Structural Characterization of a Tubular Arsenic-Vanadate: [CoII(2,2′-bpy)2]2[AsIII8VIV14O42(H2O)]·H2O

The hydrothermal reaction of VOSO₄, As₂O₃, CoC₂O₄·2H₂O and 2,2-bipy yields a novel arsenic-vanadate [Co^II(2,2-bpy)₂]₂[As^III₈V^IV ₁₄O₄₂(H₂O)]·H₂O (1), which is characterized by IR, elemental analysis, TGA, magnetic susceptibility and single crystal X-ray diffraction analysis. X-ray diffraction shows that compound 1 is the first example of tubular arsenic–vanadium cluster containing infinite {[Co(2,2-bpy)₂]₂[As₈V₁₄O₄₂(H₂O)]} chain constructed from [As₈V₁₄O₄₂(H₂O)] clusters interconnected through [Co(2,2-bpy)]²⁺ units. Crystal data: 1, orthorhombic, P 2₁2₁2₁, a=12.1401(2) Å, b=15.8722(1) Å, c=39.9533(5) Å, Z=4.Graphical Abstract: A novel polyoxoarsenicvanadate, [Co^II(2,2-bipy)₂]₂ [As^III₈V^IV ₁₄O₄₂(H₂O)]·H₂O, is depicted along with a tubular hybrid solid with a rhombic tube formed within the chain.     

Synthetic,spectroscopic, and structural Studies on Lanthanide Complexes of Diphosphazane Dioxide Ligands

Lanthanide nitrate complexes of diphosphazane dioxides Ph₂P(O)N(Prⁱ)P(O)Ph₂ ( 1 ) and (PhO)₂P(O)N(Me)P(O)(OPh)₂ ( 2 ) have been synthesised and studied by conductometry, IR, multinuclear NMR spectroscopic methods and X-ray diffraction. Ligand 2 is accessible by two different methods, viz., by direct oxidation of the phosp(III)azane ligand or by starting from phosph(V)azane chloro precursor. The structure of 2 is confirmed by X-ray diffraction. Crystallographic data for 2 : Triclinic, Space group P1 , a = 10.078(1), b = 10.575(3), c = 12.364(4) Å, α = 75.70(2)°, α = 75.56(1)°, γ = 77.68(1)°, Z = 2, V = 1 220 ų; structure refined to R_F = 0.0459 on 3 495 data with F > 3σ(F). The diphosphazane dioxide ligand exhibits trans geometry in the solid state. The structure of a lanthanide complex, [Pr(NO₃)₃( 2 )₂] ( 14 ) is also determined by X-ray diffraction. Crystallographic data for 14 : Trigonal, Space group P3₂, a = b = 15.710(2), c = 40.067(2) Å, Z = 6, V = 8 564 ų; structure refined to R_F = 0.0430 on 8 077 data with F > 5σ(F). The two diphosphazane dioxide ligands and the nitrate groups are coordinated to praseodymium in a bidentate chelate fashion. The geometry around the ten coordinated metal is distorted bicapped square antiprism.     

Oxidations by a H2O2-VO3 −-pyrazine-2-carboxylic acid reagent

Alkanes (cyclohexane, hexane, heptane isomers) are effectively oxidized in CH₃CN at 20–70°C by hydrogen peroxide when catalyzed by a Bu₄NVO₃-pyrazine-2-carboxylic acid system. Alkyl hydroperoxide is the main product; an alcohol and a ketone or an aldehyde are also formed. Under these conditions benzene is oxidized to give phenol, while alkyl benzenes yield oxygenation products both of the ring and the side chain. It has been assumed that the interaction of H₂O₂ with VO₃ ^– gives rise to generation of HO radicals and other radical-like vanadium containing species that abstract a hydrogen atom from an alkane, RH. The radical R^. formed reacts with O₂ to produce ROO^. which is then transformed to alkyl hydroperoxide.Presented at the VIII International Symposium on Homogeneous Catalysis (Amsterdam, 1992).Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 64–68, January, 1993.     

氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

Liquid structure of vanadium tetrachloride from neutron diffraction study

Assuming the separation of the intermolecular scattering function into the radial and angular parts and using Egelstaffet al’s orientational model for tetrachlorides, the structure of liquid vanadium tetrachloride has been studied. It has been observed that such a separation is approximate for this liquid and the introduction of a third correction term is required to account for the molecular structure function. The chlorine-chlorine partial structure and effective angleaveraged intermolecular chlorine-chlorine potential in the liquid has been evaluated. Without taking the third correction term, introduced to generate theoretically the molecular structure function, the centre structure function has been obtained in an approximate way from the experimentally observed molecular structure function and from it the centre radial distribution function, centre direct correlation function and the angle-averaged vanadium-vanadium effective potential has been evaluated.     

Effect of the extent of reduction of V2O5 on the adsorption of propylene and the oxidative dehydrogenation of propane to give propylene on V2O5 and V2O5/TiO2-SiO2

An increase in the propylene output in the oxidative dehydration of propane on V₂O₅/TiO₂-SiO₂ was observed after prior reduction of V₂O₅ in the reaction mixture to V₂O₄, which reduces the destructive chemisorption of propylene. A low titanium dioxide content in TiO₂-SiO₂ hinders the deep reduction of V₂O₅ to V₂O₃, which reduces the conversion of propane. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 373–378, November–December, 2007.     

液膜法分离钒(Ⅳ)的研究

本文用P204-兰113A-煤油组成的滤膜体系处理钒(Ⅳ)的溶液,并考察了表面活性剂、载体、外相pH值、内相酸度、起始钒(Ⅳ)浓度以及乳水比等因素对分离的影响。     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

正丁烷氧化制顺酐流化床催化剂的性能

 考察了前驱体制备过程中水合肼／五氧化二钒摩尔比（以下简记\r\n为n（N2H4）／n（V2O5））对催化剂性能的影响．由较高的n（N2H4）\r\n／n（V2O5）比制得的催化剂，其（VO）2P2O7相含量较多，正丁烷转化\r\n率较高．随着n（N2H4）／n（V2O5）比的减小，δ－VOPO4相的含量逐\r\n渐增多，正丁烷转化率随之升高；而顺酐选择性开始时升高，达到最大\r\n值后逐渐降低．在n（N2H4）／n（V2O5）＝0．34时制备的催化剂最佳\r\n，在丁烷浓度为4．0％、空速为500h－1及反应温度为420℃的反应条件\r\n下，顺酐收率可达49．74％．本文中细粒床催化剂有较大的操作弹性．     

Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra