Theoretical studies on the infrared spectrum of the tetrahedral molecules R<Subscript>2</Subscript>MH<Subscript>2</Subscript> (R = D(H), CH<Subscript>3</Subscript>, OH; M = Ti,Zr, Hf)

Using Stuttgart/Dresden effective core potentials MWB28, MWB60, and GTO valence basis sets (8s7p6d)/[6s5p3d], (8s7p6d)/[6s5p3d] for Zr and Hf atoms and 6-311++G(3df,3pd) basis set for C, H, O, and Ti atoms, tight convergence criteria geometry optimizations and harmonic frequency calculations are performed at B3LYP and B3LYP/IEF-PCM levels of theory so as to model the gas phase and argon matrix infrared spectra of the tetrahedral molecules R₂MH₂ (R = D(H), CH₃, OH; M = Ti, Zr, Hf). Influence of the transition metal and/or substituent group on the symmetric and asymmetric stretching frequencies of the MH₂ fragment of the R₂MH₂ molecules is investigated at both the levels of theory. The modelling of the argon matrix effect improves the agreement between the calculated frequencies and the experimental ones. The calculated argon matrix to gas phase frequency shifts is compared reasonably to the experimental argon to neon matrix shifts.     

罗丹明B分子印迹聚合物微球的合成及其在固相萃取中的应用

以罗丹明B为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了罗丹明B分子印迹聚合物(MIP)微球,并用扫描电子显微镜表征。 采用紫外分光光度法测定了印迹分子罗丹明B与功能单体丙烯酰胺二者之间的结合常数(K=5.303×103 (mol/L)-1)和化学计量比(n=1)。 考察了沉淀剂的种类和用量对聚合物微球的影响。 将分子印迹聚合物微球应用于固相萃取材料自制固相萃取柱,从加标罗丹明B的红椒粉中萃取罗丹明B。 本文优化了固相萃取条件,高效液相色谱检测表明,在一定的萃取条件下,分子印迹聚合物对加标量为0.479 mg/kg的辣椒中罗丹明B的萃取加标回收率可达91.7％～103.5%。     

Two New Neolignans from the Stems of Syringa pinnatifolia Hemsl. var. alashanensis

Two new neolignans, syripinnalignins A and B ( 1 and 2 , resp.), were isolated from the 95% EtOH extract of the stem of Syringa pinnatifolia Hemsl . var. alashanensis. The structures of 1 and 2 were elucidated by spectroscopic methods, including UV, IR, HR‐ESI‐MS, and extensive 1D‐ and 2D‐NMR techniques.     

An Ionic Liquid Loaded β-Cyclodextrin-Cross-Linked Polymer as the Solid Phase Extraction Material Coupled with High-Performance Liquid Chromatography for the Determination of Rhodamine B in Food

A novel method for separation and determination of rhodamine B in food samples is described. The work is based on the utilization of an ionic liquid loaded β-cyclodextrin cross-linked polymer coupled with high-performance liquid chromatography for the determination of rhodamine B. The inclusion interaction of the ionic liquid-β-cyclodextrin cross-linked polymer with rhodamine B was studied by FTIR. Under optimum conditions, the preconcentration factor achieved for this method was approximately 20. The linear range, detection limit, and relative standard deviation were 0.80 to 130.0 µg L^?1, 0.09 µg L^?1, and 0.66% (n = 3, concentration = 10.0 µg L^?1), respectively. The technique was successfully applied for determination of rhodamine B in food samples.     

层状四水硫酸锆催化合成乙二醇单乙醚醋酸酯反应机理的理论研究

采用以量子化学ASED－MO（含原子对排斥的EHMO法）为基础的结构自动优化EHTOPT法,研究了层状四水硫酸锆催化合成乙二醇乙醚醋酸酯的反应机理;构筑了反应组分乙二醇单乙醚羟基上的氢原子通过氢 键与层状四水硫酸锆结晶水上的氧原子结合。同时,还研究了醋酸在四水硫酸锆表面形成正碳离子的结合状态,提出了相应的酯化反应机理,在此基础上推导出的动力学方程与实验结果相符。     

Ni-catalyzed hydroboration and hydrosilylation of olefins with diboron and silylborane

Herein we report a Ni-catalyzed formal hydroboration of olefins, which afforded anti-Markovnikov-type alkylboranes with B₂pin₂ and a stoichiometric amount of water. Formal hydrosilylation using air- and moisture-sensitive silylboranes also proceeded under optimized conditions. The reaction with trans-stilbene and D₂O resulted in 1,2-H migration, which suggested that the reaction proceeded via β-hydride elimination and reinsertion mechanisms.     

聚晶立方氮化硼刀具切削高锰钢的磨损机制

在半精加工试验条件(切削深度ap=0．5mm，进给量f=0．3mm／r，干切)下研究了聚晶立方氮化硼刀具切削奥氏体高锰钢时的磨损机制，用WDH-Ⅱ型光电温度计测量了切削温度，用工具显微镜测量后刀面磨损量，进而考察了切削时间和切削速度对后刀面磨损量的影响，采用S-250MK型扫描电子显微镜观察刀具前、后刀面的磨损形貌和组成变化．结果表明：当切削温度为400～750℃时，聚晶立方氮化硼刀具同高锰钢中的γ相及其析出相(Fe，Mn)3C之间产生严重的机械磨损；当切削温度超过800℃时，聚晶立方氮化硼刀具同高锰钢单一γ相之间产生扩散磨损；聚晶立方氮化硼刀具适合于高速切削.     

半导体芯片化学机械抛光过程中材料去除机理研究进展

就国内外关于集成电路芯片化学机械抛光(CMP)材料去除机理研究的现状和进展进行了评述，总结了集成电路芯片常用介电材料二氧化硅以及导电互连材料钨、铝及铜的化学机械抛光研究现状和进展，进而分析了化学机械抛光过程中化学作用同机械作用的协同效应，指出关于芯片化学机械抛光的材料去除机理尚存在争议，因此有必要在CMP研究领域引入原子力显微镜和电化学显微镜等先进分析测试设备和相关技术，以便在深入揭示CMP过程中材料去除机理的基础上，为更好地控制CMP过程和提高CMP效率提供科学依据．     

The Carboxyl Functionalized UiO-66-(COOH)2 for Selective Adsorption of Sr2+

Efficient and selective removal of ⁹⁰Sr is an important process for the safe use of nuclear energy. Herein, we investigate and assess the Sr²⁺ adsorption properties of a metal-organic framework UiO-66-(COOH)₂ functionalized by non-bonded carboxylic groups. This MOF is an exciting class of free carboxylic functionalized MOFs that combine chemical stability with gas sorption, dye elimination, and conductivity. Specifically, we show that uniformly distributed carboxyl and water stability make it accessible for loading Sr²⁺ without structural changes. The FTIR spectroscopy, PXRD analysis, XPS, and SEM-EDS studies show excellent stability as well as the strong affinity between -COOH active site and Sr²⁺. This strong coordination interaction guarantees a high adsorption capacity of 114 mg g⁻¹ within 5 h (pH 5 and 298 K). Combined kinetic and thermodynamic studies show that the surface complexation is strong chemisorption and cost-effective spontaneous process (ΔG = −5.49 kJ mol⁻¹~−2.16 kJ mol⁻¹). The fact that UiO-66-(COOH)₂ not only possesses a high adsorption capacity, but also enables selectivity to Sr²⁺ in the presence of similar radius ions Na⁺ and K⁺, prefigures its great potential for the practical treatment of radioactive Sr²⁺ in polluted water.