Shock waves from an open-ended shock tube with different shapes

A new method for decreasing the attenuation of a shock wave emerging from an open-ended shock tube exit into a large free space has been developed to improve the shock wave technique for cleaning deposits on the surfaces in industrial equipments by changing the tube exit geometry. Three tube exits (the simple tube exit, a tube exit with ring and a coaxial tube exit) were used to study the propagation processes of the shock waves. The detailed flow features were experimentally investigated by use of a two-dimensional color schlieren method and by pressure measurements. By comparing the results for different tube exits, it is shown that the expansion of the shock waves near the mouth can be restricted by using the tube exit with ring or the coaxial tube exit. Thus, the attenuation of the shock waves is reduced. The time histories of overpressure have illustrated that the best results are obtained for the coaxial tube exit. But the pressure signals for the tube exit with ring showed comparable results with the advantage of a relatively simple geometry. The flow structures of diffracting shock waves have also been simulated by using an upwind finite volume scheme based on a high order extension of Godunov's method as well as an adaptive unstructured triangular mesh refinement/unrefinement algorithm. The numberical results agree remarkably with the experimental ones.     

Surface Trapping and STM Observation of Conformational Isomers of a Bis(Terpyridine) Ligand from Metallosupramolecular Grids

Tetranuclear Co‐grid complexes incorporating bis‐tridentate ligands, namely 4,6‐bis(2,2′‐bipyrid‐6‐yl)‐2‐phenylpyrimidine, were electrosprayed onto a Au(111) substrate under an ultrahigh vacuum. Fragmentation occurs leaving the ligands in four different conformations. Most ligands are found to form H‐bonded dimers. The most abundant conformer of the ligand on the Au surface is an asymmetric form, which has not been observed before. The present results indicate that the fragmentation of coordination compounds during the deposition process, in principle, allows for surface trapping, identification, and investigation of high energy, out‐of‐equilibrium conformations of the ligand molecules at low temperatures, which otherwise would not be observable.     

复杂无粘流场数值模拟的矩形/三角形混合网格技术

建立了一套模拟复杂无粘流场的矩形／三角形混合网格技术，其中三角形仅限于物面附近，发挥非结构网格的几何灵活性，以少量的网格模拟复杂外型；同时在以外的区域采用矩形结构网格，发挥矩形网格计算简单快速的优势，有效地克服全非结构网格计算方法需要较大内存量和较长ＣＰＵ时间的不足．混合网格系统由修正的四分树方法生成．将ＮＮＤ有限差分与ＮＮＤ有限体积格式有机地融合于混合网格计算，消除了全矩形网格模拟曲边界的台阶效应，同时保证了网格间的通量守恒．数值实验表明本方法在模拟复杂无粘流场方面的灵活性和高效性．     

Effect of Free‐Stream Turbulence on the Flow Structure near a Wedge and the Windward Side of an Airfoil

The flow structure behind wire grids is studied for flows with a low subsonic velocity, and the effect of grids on the boundarylayer flow structure is considered. It is shown that the meanvelocity inhomogeneity induced by the grid does not disappear until a distance of 925 calibers downstream of the grid is reached. Liquidcrystal thermography combined with hotwire measurements made it possible to find the source of steady largescale streamwise vortex structures in the boundary layer on a wedge and on an airfoil and to determine the parameters of these structures.     

N-S方程数值研究翼型对微型扑翼气动特性的影响

首先基于嵌套网格发展了一套适用于三维扑翼研究的非定常雷诺平均Navier-Stokes(RANS)方程数值模拟方法.为了解决微型扑翼在低马赫数下的收敛问题,使用了预处理方法,湍流模型为BL模型.在该方法的基础上,保持状态参数和扑翼表面形状一定的情况下,分别研究了一系列不同厚度、不同弯度的翼型对于微型扑翼气动特性的影响....     

谱体积方法单元分割与问题单元标记方法的改进研究

谱体积方法是一种本质上解决网格依赖性的高精度CFD计算方法,本文研究了二维Euler方程的谱体积方法,提出一种基于切比雪夫多项式的单元分割方法,建立了基于WENO的变量限制器方法,并发展了结合谱体积和控制体的问题单元标记方法.采用15°超声速压缩拐角和NACA0012跨声速流动两个典型算例进行验证,结果表明,该分区方法具有更好的计算精度,标记方法可有效识别不连续区域,在较少的网格下即可获得与密网格传统有限体积法相当的计算精度.     

Magnetic molecular wheels and grids - the need for novel concepts in “zero-dimensional” magnetism

Supramolecular chemistry has allowed the production, by self-assembly, of inorganic complexes with a [N × N] square matrix-like configuration of N² metal centers. Interest in these systems is driven by the potential applications in information technology suggested by such a “two-dimensional” (2D), addressable arrangement of metal ions. From the magnetic perspective [N × N] grids constitute molecular model systems for magnets with extended interactions on a square lattice, which have gained enormous attention in the context of high-temperature superconductors. Numerous [2 × 2] grids as well as a few [3 × 3] grids with magnetic metal ions such as Cu(II), Ni(II), Co(II), Fe(II), and Mn(II) have been created. Magnetic studies unraveled a remarkable variety in their magnetic properties, which will be reviewed in this work with emphasis on the underlying physical concepts. An intriguing issue is the connection of [2 × 2] and [3 × 3] grids with “one-dimensional” (1D) rings, as experimentally realized in the molecular wheels. For a [2 × 2] square of spin centers the distinction between a 2D grid and a 1D ring is semantic, but also a [3 × 3] grid retains 1D character: it is best viewed as an octanuclear ring with an additional ion “doped” into its center. Challenging familiar concepts from conventional magnets, the current picture of elementary excitations in antiferromagnetic rings will be discussed, as a prerequisite to understand the complex [3 × 3] grids.     

Comparison of adjoint‐based and feature‐based grid adaptation for functional outputs

Adjoint‐based and feature‐based grid adaptive strategies are compared for their robustness and effectiveness in improving the accuracy of functional outputs such as lift and drag coefficients. The output‐based adjoint approach strives to improve the adjoint error estimates that relate the local residual errors to the global error in an output function via adjoint variables as weight functions. A conservative adaptive indicator that takes into account the residual errors in both the primal (flow) and dual (adjoint) solutions is implemented for the adjoint approach. The physics‐based feature approach strives to identify and resolve significant features of the flow to improve functional accuracy. Adaptive indicators that represent expansions and compressions in the flow direction and gradients normal to the flow direction are implemented for the feature approach. The adaptive approaches are compared for functional outputs of three‐dimensional arbitrary Mach number flow simulations on mixed‐element unstructured meshes. Grid adaptation is performed with h‐refinement and results are presented for inviscid, laminar and turbulent flows. Copyright © 2006 John Wiley & Sons, Ltd.     

A sliding interface method for unsteady unstructured flow simulations

The objective of this work is to develop a sliding interface method for simulations involving relative grid motion that is fast and efficient and involves no grid deformation, remeshing, or hole cutting. The method is implemented into a parallel, node‐centred finite volume, unstructured viscous flow solver. The rotational motion is accomplished by rigidly rotating the subdomain representing the moving component. At the subdomain interface boundary, the faces along the interface are extruded into the adjacent subdomain to create new volume elements forming a one‐cell overlap. These new volume elements are used to compute a flux across the subdomain interface. An interface flux is computed independently for each subdomain. The values of the solution variables and other quantities for the nodes created by the extrusion process are determined by linear interpolation. The extrusion is done so that the interpolation will maintain information as localized as possible. The grid on the interface surface is arbitrary. The boundary between the two subdomains is completely independent from one another; meaning that they do not have to connect in a one‐to‐one manner and no symmetry or pattern restrictions are placed on the grid. A variety of numerical simulations were performed on model problems and large‐scale applications to examine conservation of the interface flux. Overall solution errors were found to be comparable to that for fully connected and fully conservative simulations. Excellent agreement is obtained with theoretical results and results from other solution methodologies. Copyright © 2006 John Wiley & Sons, Ltd.