Waves behind a Step in an Open Channel

The paper presents experimental data on flow in the vicinity of a sudden elevation of channel bottom (step). The range of external flow parameters is considered for the case where the step generates waves. A distinguishing feature of these waves is that they are formed in transition from subcritical to supercritical flow. It is shown that there is a range of external parameters in which the depth at the channel exit, the depth above the step, and the distance from the step to the first wave trough depend exclusively on flow discharge.     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

非平整、多孔介质海底上波浪传播的复合方程

为了反映近岸区域实际存在的多孔介质海底效应，并且考虑到波浪在刚性海底上传播模型的 最新研究进展，运用Green第二恒等式建立了波浪在非平整、多孔介质海底上传播的复合方 程. 假设水深和多孔介质海底层厚度均由两种分量组成：慢变分量，其水平变化的长度尺度大于 表面波的波长；快变分量，其水平变化的长度尺度与表面波的波长等阶，但其振幅小于表面 波的振幅. 另外，多孔介质层下部边界的快变分量比水深的快变分量小1个量级. 针对水体层和多孔介质层，选择Green第二恒等式方法给出了波浪传播和渗透的复合方程， 它在交接面上满足压力和垂直渗透速度的连续性条件,可充分考虑波数变化的一般连续性， 并包含了某些著名的扩展型缓坡方程.     

Surface waves induced by external periodic pressure in a fluid with an uneven bottom

The behavior of waves generated by periodic pressure on the free surface is considered within the linear shallow-water theory. The fluid depth is a piecewise-constant function, which implies the presence of a finite-size bottom trench or elevation. For an arbitrary shape of bottom unevenness, the solution of the problem reduces to a system of integral boundary equations. Manifestation of wave-guiding properties of bottom unevenness is illustrated by an example of an extended rectangular elevation.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 1, pp. 70–77, January–February, 2005.     

Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers

The effect of thermo-hygro-mechanical (THM) densification temperature on the surface color, roughness, wettability, and chemical composition of trembling aspen (Populus tremuloides) and hybrid poplar (Populus maximowiczii × P. balsamifera) veneers was investigated. Veneers were subjected to four THM densification temperatures (160 °C, 180 °C, 200 °C, and 220 °C). Veneer color darkened with increasing THM densification temperature. Surface roughness decreased between 160 °C and 200 °C. Wettability decreased after THM densification, but no significant difference was found between treated specimens. ATR-FTIR and XPS results confirmed that THM densification caused major chemical changes in veneer surfaces, and more pronounced at temperatures higher than 160 °C.     

Modular Assembly of Host–Guest Metal–Phenolic Networks Using Macrocyclic Building Blocks

The manipulation of interfacial properties has broad implications for the development of high‐performance coatings. Metal–phenolic networks (MPNs) are an emerging class of responsive, adherent materials. Herein, host–guest chemistry is integrated with MPNs to modulate their surface chemistry and interfacial properties. Macrocyclic cyclodextrins (host) are conjugated to catechol or galloyl groups and subsequently used as components for the assembly of functional MPNs. The assembled cyclodextrin‐based MPNs are highly permeable (even to high molecular weight polymers: 250–500 kDa), yet they specifically and noncovalently interact with various functional guests (including small molecules, polymers, and carbon nanomaterials), allowing for modular and reversible control over interfacial properties. Specifically, by using either hydrophobic or hydrophilic guest molecules, the wettability of the MPNs can be readily tuned between superrepellency (>150°) and superwetting (ca. 0°).     

Molecular Transport within Polymer Brushes: A FRET View at Aqueous Interfaces

Molecular permeability through polymer brush chains is implicated in surface lubrication, wettability, and solute capture and release. Probing molecular transport through polymer brushes can reveal information on the polymer nanostructure, with a permeability that is dependent on chain conformation and grafting density. Herein, we introduce a brush system to study the molecular transport of fluorophores from an aqueous droplet into the external “dry” polymer brush with the vapour phase above. The brushes consist of a random copolymer of N-isopropylacrylamide and a Förster resonance energy transfer (FRET) donor-labelled monomer, forming ultrathin brush architectures of about 35 nm in solvated height. Aqueous droplets containing a separate FRET acceptor are placed onto the surfaces, with FRET monitored spatially around the 3-phase contact line. FRET is used to monitor the transport from the droplet to the outside brush, and the changing internal distributions with time as the droplets prepare to recede. This reveals information on the dynamics and distances involved in the molecular transport of the FRET acceptor towards and away from the droplet contact line, which are strongly dependent on the relative humidity of the system. We anticipate our system to be extremely useful for studying lubrication dynamics and surface droplet wettability processes.     

Effect of low-pressure radio-frequency air plasma on chitosan films

The effect of low-frequency (15 kHz), low-pressure (10 Pa) air plasma treatment on freshly prepared chitosan films at processing times from 3 to 10 min has been explored. The films were prepared using chitosan solutions in dilute acetic acid. The influence of the plasma exposure time on the composition, morphology, and hydrophilic properties of the film surfaces is discussed.     

Treatment of a Polyethylene Powder Using a Remote Nitrogen Plasma Reactor Coupled with a Fluidized Bed: Influence on Wettability and Flowability

A Far Cold Remote Nitrogen Plasma is used both to fluidize and to treat a polyethylene powder in order to increase its hydrophilic character. The evolution of the wettability of the powder as well as the one of its physical (density, particles size distribution, average diameter, shape factor, and BET surface area) and flow properties (angle of repose, angle of slide, and Hausner index) are determined versus various experimental conditions. It is shown that the plasma treatment efficiency is strongly dependant on the oxygen content of the nitrogen flow and on the velocity of fluidizing gas. Best wettability is obtained by the addition of 0.75% of O₂ in the nitrogen plasma gas and with a high gas velocity. It is also evidenced that the flowability of the powder is slightly altered by the plasma treatment.