Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

一种新型频域均衡器在水声通信中的应用

在传统频域均衡器的基础上,结合多载波频移键控调制方式的频谱结构,利用接收信号和参考信号的相关性及均衡器的滤波系数,提出了一种兼具均衡与解调功能的新型频域均衡器结构.该均衡器简单、有效地克服了水声信道中多径传播产生的码间干扰和频率选择性衰落等问题,简化了水声通信系统接收机的复杂度. 新型频域均衡器的解调原理以非相关解调算法为基础,但由于利用了均衡器的计算结果,其差错性能优于传统的非相关解调算法,计算机仿真试验表明,改进后的方法使差错性能提高了2 dB;实际水声通信实验表明,该均衡器能够有效地提高水声通信系统的可靠性,具有很好的应用前景.     

透射式跑道能见度激光测量仪的研究

介绍了一种利用激光测量跑道水平及斜视能见度的智能化仪器。该仪器主要由光学系统、信号放大与处理系统及显示系统三部分组成。简要介绍了该仪器的基本结构、工作原理和主要技术指标，讨论了其中的技术难点及其相应的解决办法。     

反光板(合作目标)反射率测量仪

本文介绍了反光板（合作目标）反射率测量仪的研制。仪器采用对称双光路比较测量法，给定两束相等光通量的光束，分别作为参考光束和测试光束，并用分束器实现原光路取样，从而解决了合作目标反光板入射光线与反射光线重合不能用常规测试方法来检测的难题。由于采用对称双光路的方法，入射光通量是相对恒定的，不受外界因素影响，从而使反射率测量仪达到精度高、重复性好和环境要求低的设计要求。     

Influence of target surface degradation on the properties of r.f. magnetron‐sputtered calcium phosphate coatings

This paper reports a detailed study of how repeated r.f. magnetron sputtering from a hydroxyapatite (HA) powder target affects the nature and reproducibility of a sequential series of thin‐film coatings deposited onto Ti6Al4V substrates. An evaluation of the effective lifespan of the HA sputter targets and the reproducibility of the calcium phosphate (CaP) coatings produced from them has been made from Fourier transform infrared spectroscopy, XPS and, as appropriate, atomic force microscopy and SEM/energy dispersive x‐ray analyses. The annulus region of the target surface, from which sputtering under r.f. magnetron conditions normally occurs, showed severe surface degradation after only one deposition run, as indicated by significant PO₄^3? and OH^? depletion. This deterioration continued after each subsequent deposition cycle but to a much lesser extent than that observed in the initial sputtering period. The layers produced from all of the sputter runs contained the expected Ca²⁺ and PO₄^3? species characteristic of a CaP system but were OH^? deficient in the as‐deposited state. However, the chemical and morphological properties of the coatings did not change significantly until after the third consecutive sputter cycle. Hence, these data indicate that, even though a significant level of degradation of the HA target occurs at the outset of the sputtering procedure, the general plasma conditions employed here have a dominant influence on the coating properties until a critical degradation condition is met. As such, the compacted HA powder targets of interest can have a life‐cycle greater than single usage without detriment to the chemistry and morphology of the coatings produced from them. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis, Crystal Structure and Inhibition of the K562 Cell Proliferation of N＇-Tertbutylaminocarbonyl-N-2-chlorophenoxyacetylthiourea

The title compound N'-tert-butylaminocarbonyl-N-2-chlorophenoxyacetylthiou- rea has been synthesized for the first time. Complete assignments were achieved by IR, 1H NHR and single-crystal X-ray diffraction analyses. The inhibitory rate of the cellular growth of K562 cells (chronic myeloid 1eukemic cells) was measured using MTT [3-(4,5-dimethylthiazo-2-y1)-2,5-di- phenyltetra-zolium bromide] assay. The cell apoptosis was assessed by agarose gel electrophoresis to find that the title compound has antiproliferation and apoptosis inducing effects on K562 cells. In order to investigate the relationship between structure and activity of the target compound, we report its crystal structure and biological behavior in the present paper. Crystallographic data: C14H18- ClN3O3S, Mr = 343.82, orthorhombic, space group Pnma, a = 19.786(6), b = 6.789(2), c = 12.938(4) , V = 1738.0(9) 3, Z = 4, Dc = 1.314 g/cm3, F(000) = 720, μ(MoKα) = 0.354 mm-1, R = 0.0378 and wR = 0.0941. The molecule is a planar structure.     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

黑腔靶X光转换,输运的定量测量

为了测量黑腔靶X光引光效率、转换效率,我们设计了相应的分解靶(泄漏靶)实验,1989～1992年在″神光″装置上共进行了四次漏靶分解实验,利用灵敏度作了绝对标定的平响应X光二极管对漏靶注入孔、引光孔流出的X光角分布进行了测量,测出了x光角分布,得到了黑腔靶X光转换效率为50％～60％,引光效率约6％,为以后辐射驱动内爆研究的理论计算和靶的优化设计提供了重要的数据。     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.