Nucleophilic Solvent Intervention in Benzylic Solvolyses. The Use of YBnx Scales in Grunwald-Winstein Type Correlation Analysis

New Y_BnX scales of solvent ionizing power are developed and considered superior to Y_x scales for benzylic bromides, chlorides, p-nitrobenzoates and tosylates in Grunwald-Winstein type correlation analysis of solvolytic reactivities. The Y_BnX values, with addition and revision, are summarized. Evidence for nucleophilic solvent intervention in the solvolysis transition state for secondary and tertiary benzylic substrates is given. The advantages of employing this tool to understand solvolysis mechanisms are discussed.     

Unconventional Hamilton-type variational principle in phase space and symplectic algorithm

By a novel approach proposed by Luo, the unconventional Hamilton-type variational principle in phase space for elastodynamics of multidegree-of-freedom system is established in this paper. It not only can fully characterize the initial-value problem of this dynamic, but also has a natural symplectic structure. Based on this variational principle, a symplectic algorithm which is called a symplectic time-subdomain method is proposed. A non-difference scheme is constructed by applying Lagrange interpolation polynomial to the time subdomain. Furthermore, it is also proved that the presented symplectic algorithm is an unconditionally stable one. From the results of the two numerical examples of different types, it can be seen that the accuracy and the computational efficiency of the new method excel obviously those of widely used Wilson-θ and Newmark-β methods. Therefore, this new algorithm is a highly efficient one with better computational performance.     

Core-level electronic properties of nanostructured NiO coatings

Nanostructured NiO films with different thicknesses were grown on nanoporous alumina membrane substrates by reactive evaporation of Ni in an oxygen atmosphere. The reactive deposition process was assisted by a low energy oxygen ion-beam in order to increase the NiO input into the pores. Surface morphology and structure of the films were analyzed by SEM and XPS. SEM observations reveal a well adhered film of NiO on the substrate. This film appears to be uniform and presents a rather irregular nanostructured morphology, built of NiO clusters with sizes ranging between 5 and 30 nm. The core-level electronic properties of this nanostructured NiO film result to be similar to those of an ultrathin film about one monolayer thick. This behaviour can be explained by the large surface to volume ratio of both systems.     

Substrates for flexible electronics: A practical investigation on the electrical,film flexibility,optical, temperature,and solvent resistance properties

Designing and developing flexible electronics requires a thorough investigation of the substrates available for the fabrication of devices. Here, we present a practical study on a variety of significant substrates: polyethylene terephthalate (PET), its heat‐stabilized (HS) derivative, HS‐PET, and polyethylene naphthalate (PEN) plastic insulating films; indium tin oxide (ITO)‐coated ITO/PEN and ITO/PET transparent conducting films; rigid ITO/glass and FTO/glass substrates; stainless steel and titanium foils. We put the substrates through a range of tests these actually undergo during device fabrication to determine their optical, mechanical flexibility (under different types of tensile and compressive stress bending with and without a PEDOT:PSS conducting polymer layer), solvent resistance, stability to temperature treatment (conductivity and deformation), and to UV irradiation. We highlight issues and propose solutions to improve substrate response. The results and thresholds extracted reveal limitations and windows of opportunity useful for the designer of flexible optoelectronics in determining manufacturing processes and the final applications under everyday operation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

用于高速摄影变象管的软X射线光电阴极

光阴极由衬底(包括介质阴极的导电基底)和光电发射膜构成。采用了聚丙烯、Formvar和Paylene三种有机薄膜作阴极衬底。建立了这些薄膜的制备技术。用一台自制的软X射线单色仪在277—7469ev光子能量范围内测量了这些薄膜的透过率。 研究了CsI、CsBr、Au和MgF₂四种光电阴极的光电发射特性和光电发射与阴极厚度的关系,找出了最佳阴极厚度。用软X射线单色仪在277—7469ev光子能量范围内测量了最佳厚度阴极的绝对量子效率,四种阴极最大值分别为4.50、2.90、0.25和0.12。我们还在同一阴极衬底上分区制备了四种阴极,在变象管荧光屏上比较其亮度,结果和测量的一致。 用LAB5型表面分析仪对CsI和Au阴极的光电子初能量分布作了测量,CsI阴极光电子初能量分布半高宽远小于Au。因此CsI是适用于高速摄影变象管比较理想的软X射线光电阴极。     

Accurate Design of Finline Tapers for Millimeter Wave Applications

The design of nonuniform bilateral finlines on anisotropic substrates for millimeter wave applications is presented. The taper consists of a planar circuit with smooth variation of the slot width profile along the structure. The spectral domain method and Galerkin procedure are combined with the transmission line theory for studying the behavior of tapered bilateral finlines and evaluation of their design parameters. The influence of the substrate anisotropy on the propagation characteristics of these structures is also examined. This technique is general and can be applied to investigate a broad class of planar transmission line tapers.     

Unconventional Hamilton-type variational principles for electromagnetic elastodynamics

According to the basic idea of classical yin-yang complementarity and modern dual-complementarity, in a simple and unified new way proposed by Luo, the unconventional Hamilton-type variational principles for electromagnetic elastodynamics can be established systematically. This new variational principles can fully characterize the initial-boundary-value problem of this dynamics. In this paper, the expression of the generalized principle of virtual work for electromagnetic dynamics is given. Based on this equation, it is possible not only to obtain the principle of virtual work in electromagnetic dynamics, but also to derive systematically the complementary functionals for eleven-field, nine-field and six-field unconventional Hamilton-type variational principles for electromagnetic elastodynamics, and the potential energy functionals for four-field and three-field ones by the generalized Legendre transformation given in this paper. Furthermore, with this approach, the intrinsic relationship among various principles can be explained clearly.     

Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.     

Atomically flat single terminated oxide substrate surfaces

Scientific interest in atomically controlled layer-by-layer fabrication of transition metal oxide thin films and heterostructures has increased intensely in recent decades for basic physics reasons as well as for technological applications. This trend has to do, in part, with the coming post-Moore era, and functional oxide electronics could be regarded as a viable alternative for the current semiconductor electronics. Furthermore, the interface of transition metal oxides is exposing many new emergent phenomena and is increasingly becoming a playground for testing new ideas in condensed matter physics. To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chemically mixed nature and also often polar. In this review, we summarize the surface treatment procedures to accomplish atomically flat surfaces with single terminating layer for various metal oxide substrates. We particularly focus on the substrates with lattice constant ranging from 4.00 Å to 3.70 Å, as the lattice constant of most perovskite materials falls into this range. For materials outside the range, one can utilize the substrates to induce compressive or tensile strain on the films and explore new states not available in bulk. The substrates covered in this review, which have been chosen with commercial availability and, most importantly, experimental practicality as a criterion, are KTaO₃, REScO₃ (RE = Rare-earth elements), SrTiO₃, La_0.18Sr_0.82Al_0.59Ta_0.41O₃ (LSAT), NdGaO₃, LaAlO₃, SrLaAlO₄, and YAlO₃. Analyzing all the established procedures, we conclude that atomically flat surfaces with selective A- or B-site single termination would be obtained for most commercially available oxide substrates. We further note that this topmost surface layer selectivity would provide an additional degree of freedom in searching for unforeseen emergent phenomena and functional applications in epitaxial oxide thin films and heterostructures with atomically controlled interfaces.     

Immobilization of silver nanoparticles into POEGMA polymer brushes as SERS‐active substrates

Surface‐enhanced Raman scattering (SERS) has attracted a great deal of interest during the past four decades and emerged as an ultrasensitive optical technique for chemical and biomedical analysis. It is widely accepted that the facile fabrication of SERS substrates with high activity and good reproducibility is of crucial importance for their applications. Herein, we report on a fast and robust method for the synthesis and immobilization of silver nanoparticles (AgNPs) into poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes under mild conditions without using any reducing agents. POEGMA brushes of different chain lengths were synthesized directly on silicon wafers by surface‐initiated atom transfer radical polymerization with various reaction time. X‐ray photoelectron spectroscopy and field emission scanning electron microscope measurements indicated that the AgNPs were firmly and homogeneously embedded into POEGMA brushes. The resulting POEGMA–AgNP hybrid films were employed as SERS substrates for the detection of 4‐aminothiophenol, giving rise to an enhancement factor of up to 1.9 × 10⁶. The influence of the POEGMA's chain length on SERS performance was also investigated. Copyright © 2016 John Wiley & Sons, Ltd.