CO2,O2,CF4液体微滴喷射靶激光等离子体光源光谱

基于软X射线辐射计量和极紫外投影光刻(EUVL)应用,研制了一台使用纳秒激光器的液体微滴喷射靶激光等离子体(LPP)极紫外光源。该光源由一个可连续控温的不锈钢电磁喷气阀门、YAG激光器和能同步控制喷气阀门和激光器的脉冲发生器组成。使用液氮作致冷剂,控温范围77～473 K。对于足够高的背景气压和低的阀门温度,当气体经过阀门脉冲式地喷入真空靶室内时,气体经过气-液相变碎裂成大量的液体微滴形成液体微滴喷射靶。首先,依据非相对论量子力学理论,使用原子光谱分析常用的Cowan程序,计算了O2,CO2和CF4等几种液体在1011～1012W.cm-2激光功率密度下可能相应产生的O4 ,O5 ,O6 ,O7 ,F5 ,F6 和F7 离子的电偶极辐射跃迁波长和跃迁概率。其次,在激光焦点功率密度为8×1011W.cm-2时,测量了CO2,O2,CF4液体微滴喷射靶在6～20 nm波段的光谱。理论计算结果与实验结果相比较,得出了所测量谱线的电偶极辐射跃迁波长和跃迁概率以及跃迁能级所应归属的组态和光谱项。     

润滑油对基于制冷循环的喷雾冷却系统性能的影响

针对高功率固体激光器的散热需求,设计了一种基于制冷循环的喷雾冷却系统,并对其换热性能进行研究。由于制冷系统的压缩机需要润滑,冷却液中不可避免地会混有润滑油。润滑油会对冷却液的粘度、表面张力产生影响,并可能产生油膜,从而对冷却液的换热过程产生强化或抑制。因此,通过实验研究,分析了润滑油对喷雾冷却换热性能的影响。实验结果表明,冷却液中存在润滑油,会增大冷却液流经喷嘴过程中的阻力,减小流量,但根据本系统的应用情况,可以忽略;在低热流密度时,含有一定量的润滑油更有利于热源表面温度的均匀分布,高热流密度时,2%(质量分数)的含油量对温度分布不均的影响可以忽略;润滑油的存在可以提高临界热流密度,使得系统的散热能力得到提高,更有利于其在高功率固体激光器散热领域的应用。     

硼碳氮纳米管的热解法制备及生长机理研究

以乙二胺、二茂铁和硼氢化钠为原料,以N2和H2为辅气,用钴作催化剂,在不同温度下制备出了具有竹节状结构的硼碳氮(BCN)纳米管.根据透射电子显微镜观察,分析了BCN纳米管的生长机理.B和N的同时掺杂,所形成的五边形结构比单独N掺杂时具有更低的形成能,是竹节状结构形成的主要原因.用Raman光谱可以用来表征BCN纳米管中B和N的掺杂程度及纳米管的质量.分析表明,在860℃下制备的BCN纳米管竹节状结构最密集,质量最好,产率最高.扫描俄歇微探针分析表明,在860℃下制备的BCN纳米管的元素组成比为B∶N∶C= 关键词： BCN纳米管 热解 透射电子显微镜 Raman光谱     

超声搅拌磁流变抛光液的声场仿真分析

为了探究超声搅拌磁流变抛光液的制备及优化工艺,利用多物理场数值计算方法,建立了超声搅拌磁流变抛光液的声场仿真模型。研究了20 kHz下不同液位深度、超声变幅杆探入深度、不同功率下磁流变抛光液的声场分布。通过测量磁流变抛光液的声场强度对声场仿真进行了验证。结果表明:随着距变幅杆距离的增加,声强逐渐减弱,高声强区域主要分布在换能器轴线附近。声强在距变幅杆输出端20 mm范围内急剧衰减,变幅杆最佳探入深度为10 mm,增大功率有助于空化区域的扩大。声场仿真结果与实验测量结果基本一致,对磁流变抛光液的制备提供了数值计算基础。     

超声动载荷下三维随机骨料混凝土的损伤

混凝土是一种由粗骨料与水泥砂浆组成的非均质复合材料。本研究利用APDL语言程序编写三维水泥混凝土骨料随机投放程序并导入ABAQUS中,同时赋予各相材料塑性损伤本构关系来研究混凝土动态加载下的破坏规律,运用超声波在混凝土破碎中的作用机理对混凝土动态损伤破坏过程进行模拟研究。结果表明:随着超声动态载荷的增大,粗骨料体积分数为40%的混凝土始终能够承受最大应力载荷;随着超声应力波幅值增大,混凝土在动载荷下的损伤值逐渐增大,且粗骨料体积分数为40%时,其抗损伤能力最优;当粗骨料最大粒径逐渐增大,或者当粗骨料最小粒径增大,混凝土级配不合理导致性能不稳定,更易损伤破坏。     

Ternary eutectic growth of Ag-Cu-Sb alloy within ultrasonic field

The liquid to solid transformation of ternary Ag42.4Cu21.6Sb36 eutectic alloy was accomplished in an ultrasonic field with a frequency of 35 kHz, and the growth mechanism of this ternary eutectic was examined. Theoretical calculations predict that the sound intensity in the liquid phase at the solidification interface increases gradually as the interface moves up from the sample bottom to its top. The growth mode of (ε θ Sb) ternary eutectic exhibits a transition of "divorced eutectic- mixture of anomalous and regular structures-regular eutectic" along the sample axis due to the inhomogeneity of sound field distribution. In the top zone with the highest sound intensity, the cavitation effect promotes the three eutectic phases to nucleate independently, while the acoustic streaming efficiently suppresses the coupled growth of eutectic phases. In the meantime, the ultrasonic field accelerates the solute transportation at the solid-liquid interface, which reduces the solute solubility of eutectic phases.     

Influence of strain/stress on the nonlinear-optical properties of sprayed deposited ZnO:Al thin films

Nanocrystalline ZnO:Al thin films were deposited by reactive chemical pulverization spray pyrolysis technique on heated glass substrates at 450 °C to study their crystalline structure, composition, strain, stress, roughness characteristics and nonlinear optical susceptibility as a function of Al concentration (0, 2, 3, 5 at.%). The films were characterized by X-ray diffractometer (XRD), EDAX 9100 analyser, atomic force microscopy (AFM) and third harmonic generation (THG). The Al (3 at.%) doped ZnO thin films exhibited the lower strain/stress than undoped films. The nonlinear properties of the ZnO:Al thin films have been found to be influenced by the films strain/stress.     

Aligned carbon nanotubes catalytically grown on iron-based nanoparticles obtained by laser-induced CVD

Iron-based nanoparticles are prepared by a laser-induced chemical vapor deposition (CVD) process. They are characterized as body-centered Fe and Fe₂O₃ (maghemite/magnetite) particles with sizes ≤5 and 10 nm, respectively. The Fe particles are embedded in a protective carbon matrix. Both kind of particles are dispersed by spin-coating on SiO₂/Si(1 0 0) flat substrates. They are used as catalyst to grow carbon nanotubes by a plasma- and filaments-assisted catalytic CVD process (PE-HF-CCVD). Vertically oriented and thin carbon nanotubes (CNTs) were grown with few differences between the two samples, except the diameter in relation to the initial size of the iron particles, and the density. The electron field emission of these samples exhibit quite interesting behavior with a low turn-on voltage at around 1 V/μm.     

CO_2气氛对燃料N析出特性的影响

在水平管式炉上进行徐州烟煤在Ar和CO_2气氛下的热解试验,研究CO_2气氛对燃料N析出特性的影响。结果发现,两种气氛下,NH_3的收率随温度的升高均先升高后减小,在800℃时达到一个最大值,Ar气氛下此最大值比CO_2气氛下大很多;两种气氛下,HCN的收率均随温度的升高而升高。两种气氛下随着温度的升高,HCN与NH_3的收率比均升高,但在CO_2气氛下收率比更大,说明CO_2的氧化作用和气化作用促进了燃料N向HCN的转化。     

煤颗粒热解的传热传质分析

采用分布活化能模型及能量守恒方程对煤颗粒热解的传热传质过程建立数学模型,模型考虑煤热解的吸热效应及挥发分逸出时对流换热的影响.与有关煤粉和大颗粒煤热解的实验数据对比,对模型进行验证.针对煤颗粒的温度变化过程和煤热解过程进行数值分析,研究煤热解的吸热效应、挥发分气体逸出的对流效应、颗粒尺寸等参数的影响.