关于液体内大规模声处理中空化研究的几点思考——再论声空化工程

再次强调了大规模液体中超声处理、以及为此目的研究声空化的重要性。提出了对这项应用中声空化行为的几点思考,重点是关于声空化的"强度"以及关于电动力式和流体动力式两类产生空化系统所产生空化的不同特性。     

基于平底孔反射体的双晶直探头测量模型

双晶探头在无损检测领域有着重要的应用,因而有必要建立一个超声测量模型来深入了解这类换能器的特点.通过将一个基于传递矩阵的多高斯声束模型和一个基尔霍夫近似方法获得的散射模型有效结合,建立了一个完整的纵波双晶直探头测量模型,用于预测平底孔缺陷体的回波信号.对比分析了平底孔反射回波信号的模型计算结果与实验测量结果,验证了该测量模型的准确性. 关键词： 超声测量模型 双晶直探头 多高斯声束模型     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Physical properties of Pb doped ZnS thin films prepared by ultrasonic spray technique

In the present work, high quality Pb doped ZnS thin films were deposited on glass substrates at 450°C using spray ultrasonic technique. The dependence of the structural, morphological and optical properties of the films on the lead (Pb) doping amount was investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–vis–NIR spectrophotometry, and four-point method. The improvement of the obtained Pb:ZnS thin films properties were discussed as a function of Pb concentration (0.5 to 2 at.%). The average crystallite size of Pb:ZnS was found in the range of 25–37 nm. The scanning electron microscopy (SEM) reveals that the films are continuous, homogeneous and dense. The UV–vis–NIR spectroscopy characterizations demonstrated that all the films exhibit good transmittance (60–70%) in the visible region and their optical band gap energy ($E_{\mathrm{g}}$) changes from 3.92 to 3.6 eV. The films electrical resistivity showed an apparent dependence on Pb content.     

Surface and volume non-invasive methods for the structural monitoring of the bass-relief ‘Madonna con Bambino’ (Gorizia,Northern Italy)

Abstract

Structural analysis of marble statues, carried out by non-invasive and in situ methods, is crucial to define the state of conservation of the artworks and to identify the deterioration phenomena that can affect them. In this work, we combined in situ non-destructive techniques, ultrasonic tomography (US), ultraviolet-induced visible fluorescence (UV-IF) and X-ray fluorescence (XRF) to study the bass-relief ‘Madonna con Bambino’ (Gorizia, Italy). The US revealed the presence of some metallic pivots, associated with areas of high sound velocity; moreover, a more degraded area has been identified in the lower part of the bass-relief. The acquired UV-IF image confirmed the presence of surface degradation, allowing a preliminary evaluation of the extension of a fracture, from surface to bulk. In addition, the different materials (both original and/or integrations) that compose the studied surface have been identified. The XRF has contributed to define the nature of the inorganic materials applied during undocumented previous restoration works on the surface as filler for lacunae.     

超声动载荷下三维随机骨料混凝土的损伤

混凝土是一种由粗骨料与水泥砂浆组成的非均质复合材料。本研究利用APDL语言程序编写三维水泥混凝土骨料随机投放程序并导入ABAQUS中,同时赋予各相材料塑性损伤本构关系来研究混凝土动态加载下的破坏规律,运用超声波在混凝土破碎中的作用机理对混凝土动态损伤破坏过程进行模拟研究。结果表明:随着超声动态载荷的增大,粗骨料体积分数为40%的混凝土始终能够承受最大应力载荷;随着超声应力波幅值增大,混凝土在动载荷下的损伤值逐渐增大,且粗骨料体积分数为40%时,其抗损伤能力最优;当粗骨料最大粒径逐渐增大,或者当粗骨料最小粒径增大,混凝土级配不合理导致性能不稳定,更易损伤破坏。     

Ultrasound-promoted green synthesis of 1,4-dihydropyridines using fuctionalized MWCNTs as a highly efficient heterogeneous catalyst

A new method for multi-component synthesis of 1,4-dihydropyridine derivatives (1,4-DHPs) in the presence of meglumine supported on multiwalled carbon nanotubes (MWCNTs@meglumine) as a new heterogeneous, highly efficient and reusable catalyst was investigated. The reaction was performed under ultrasonic irradiation in EtOH at room temperature. A new, highly efficient heterogeneous catalyst, short reaction times, high to excellent yield of products, and safe and clean conditions are the advantages of the presented method.     

A new ultrasonic measurement system for the cure monitoring of thermosetting resins and composites

Measurements of the ultrasonic sound speed of thermosetting resins and composites can be used as an in-process cure monitoring technique. Ultrasonic measurements have an advantage over other in-process techniques in that ultrasonic sensors do not make contact with the part (thus leaving no imbedded sensor or witness mark) and can make true bulk measurements of the part. A new commercially available ultrasonic cure monitoring system has been developed which easily enables ultrasonic measurements to be made in compression molding, resin transfer molding, and autoclave processes. Advancements in ultrasonic sensor technology enable the sensor to maintain good coupling to the part during thermal cycling to 260C. Data is presented showing the change in ultrasonic sound speed during the compression molding of a graphite-epoxy prepreg. The data shows a good relationship to the ionic conductivity and resistivity data collected via dielectric cure monitoring.This effort was sponsored by the Manufacturing Technology Directorate, Wright Laboratory (WL/MTX), Air Force Material Command, USAF, under cooperative agreement award(s) to NCMS. The U. S. Government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of Wright Laboratory or the U.S. Government.     

Lamellar metal-organic complex and its rod-like nanoparticles prepared with ultrasonic technique

Metal-organic complex (H3NCH2CH2NH2)3[MoO2(OC6H4O)2] with a lamellar morphology has been syn- thesized. Its crystal structure was confirmed by single-crystal X-ray diffraction. The morphology of the crystal was observed by scanning electron microscopy (SEM). The metal-organic nanoparticles have been prepared by using an ultrasonic method. The morphology of the as-prepared nanoparticles was observed by transmission electron microscopy (TEM). The possible formation mechanism has also been proposed.