Monocrystal elastic constants in the ultrasonic study of welds

For studying welds ultrasonically, the importance of knowing the material's single-crystal elastic constants, the C_ijs, is explained. Where these constants are not known, some guidelines are given for estimating them from polycrystalline elastic constants such as Young's modulus and the shear modulus.The important case of [001] fibre texture is considered. Being transversely isotropic, this case exhibits five macroscopic elastic constants, which are related to the three cubic elastic constants: C₁₁, C₁₂, C₄₄. From these five constants the angular variations of Young's modulus, the torsional modulus, and the sound velocities can be computed. For the same [001] fibre texture, results are given for a standard well-characterized material — copper, where the C_ijs are well known.     

Ultrasonic SH wave velocity in textured aluminium plates

Neutron diffraction has been used to measure the crystallite orientation distribution function for a sample of rolled aluminium plate. Based on this study an expression is given for the ultrasonic velocity of the fundamental horizontally polarized shear (SH) wave propagating in the plane of the plate at an angle θ to the rolling direction. This expression is correct to second order in the leading texture component and is compared with the exact numerical result and with measurements of the SH wave velocity for this plate. In textured materials the group and phase velocities are not, in general, parallel and an expression for the angle between them is derived. Inclusion of this effect leads to better agreement between experiment and theory. The results have application to the texture-independent determination of stress with ultrasonics recently proposed by MacDonald and Thompson et al.     

Elastic properties of lead-phosphate glasses doped with samarium trioxide

A series of ternary lead-phosphate glasses doped with samarium trioxide, xSm₂O₃-(40−x)PbO-60 P₂O₅ (where x=0.1 to 0.5 mol%) have been prepared by using conventional melt quenching method and their elastic properties have been studied at room temperature. Results from the studies show that both longitudinal and transverse sound velocities decrease by increasing the Sm₂O₃ content. Elastic moduli, Poisson's ratios decrease with increase of Sm₂O₃ composition up to 0.3 mol% and then there is a slight increasing trend observed at 0.4 mol%. The densities of these glasses have been measured by using displacement method. The variations of these parameters have been discussed with respect to samarium trioxide concentration.     

Comparison Between Different Syntesis Methods of PMMA/HA Using Ultrasonic Radiation

Summary: The use of PMMA as dental and osseous cement and also in the fabrication of intraocular lenses has been widely reported. The combination of its excellent properties with those of hydroxyapatite (HA) to form a composite material, can result in very interesting properties as a biomaterial. The key is to obtain a good filler dispersion and interface bonding. Ultrasonic radiation seems to be a very versatile method for the synthesis of these materials, since the use of conventional initiators can be avoided, the filler dispersion improved and the interface interaction can be promoted. In the present work PMMA/HA composite materials were prepared by three different synthesis routes using ultrasonic radiation, in order to study the effect of the synthesis method on the final microstructure. Method I : in situ synthesis of PMMA and HA, under ultrasonic radiation by emulsion polymerization of MMA and HA precursors. Method II : in situ synthesis of HA, (from its precursors) by high frequency ultrasound in commercial PMMA solution Method III : in situ polymerization of MMA under high frequency ultrasonic radiation and adding HA to the solution and Method IV Mixing of hydroxyapatite nanocrystals, in different proportions, in a solution of commercial PMMA, by different periods from 10 min to 7 h, under low frequency (conventional) ultrasonic radiation, to compare the effect of high frequency and conventional ultrasound radiation. The different materials were characterized by FTIR, SEM, TEM, DRX, ¹H NMR and TGA. The results showed that, all the composites prepared by in situ synthesis showed an interaction between HA and PMMA, manifested by a bonding of the phosphate groups with the polar groups of the polymer matrix observed by FTIR. On the other hand, when the synthesis was carried out simultaneously adding HA and PMMA precursors a inhibition of the polymerization reaction of MMA was observed.     

Miscibility of Solution Blends of Unsaturated Polyester Resin with Polystyrene and Polycarbonate

Miscibility studies of unsaturated polyester resin (UPR) blends with two different thermoplastics—polystyrene (PS) and polycarbonate (PC), in a common solvent, chloroform, were carried out by viscosity, ultrasonic velocity, density, and refractive index methods. Two interaction parameters, μ and α were calculated using viscosity data for these blends. The positive interaction parameter values (μ and α > 0) obtained for the UPR/PS blend and the negative interaction parameter values (μ and α < 0) obtained for the UPR/PC blend indicate that the former is a miscible blend and the latter is an immiscible blend. These results were further confirmed by the ultrasonic velocity, density, and refractive index measurements.     

Ultrasonic and FT-IR studies on Bi2O3–Er2O3–PbO glasses

Glasses in the 90Bi₂O₃–(10?x)Er₂O₃?xPbO (x = 3, 5, 7, 9 and 10 mol%) system have been prepared by the melt-quenching technique. Elastic properties and FT-IR spectroscopic studies have been employed to study the role of PbO in the structure of the investigated system. Elastic properties and Debye temperature were recorded using sound wave velocity measurements at 4 MHz at room temperature. The results showed that density increased and molar volume decreased, while both sound velocities increased with an increase in x. Infrared spectra of the glasses revealed that the bismuthate network is affected by an increase in PbO content. The results are interpreted in terms of the conversion of [BiO₆] into [BiO₃] structural units, indicating that Pb ions have been substituted for erbium ions as tetrahedral network formers. The elastic moduli increased with increasing PbO content due to the increased average bond strength and degree of connectivity, as a direct effect of the increase in [BiO₃] structural units.     

Ultrasonic evidence for short-range charge-ordering state in the low-doping regime of La1– x Sr x FeO3 (1/3 ≤ x ≤ 0.45)

The longitudinal ultrasonic velocity (V) and attenuation at a frequency of 10?MHz, as well as magnetization and resistivity, have been measured in the single-phase polycrystalline La_{1– x} Sr _x FeO₃ (x?=?1/3, 0.4, 0.45). Upon cooling down from high temperature, a slight softening in V and dramatic stiffening are observed in all samples, and this stiffening is coincided with a big attenuation peak. The relative increase of V is proportional to the Sr concentration, which implies that this anomaly is strongly correlated with Fe⁴⁺. However, no obvious changes in magnetic and electric properties are found at this temperature range. The analysis suggests that this feature may be caused by the Jahn–Teller effect of Fe⁴⁺ and correspond to the formation of short-range charge-ordering state.     

焊缝超声相控阵检测数据深度学习降噪方法

超声相控阵检测技术在焊缝检测中具有广泛的应用.超声相控阵检测技术检测信号中常混入噪声导致检测成像时难以分辨真实的缺陷特征.这些噪声主要为无关的反射信号和局部相关的结构噪声,传统的超声图像降噪方法难以有效滤除这些噪声,且存在计算效率低、参数优化复杂等问题.该文提出了一种基于深度学习的焊缝超声相控阵检测技术检测S扫图像的降...     

Acousto-optical diagnostics of Gulyaev-Bleustein waves under Fresnel reflection conditions

Diffraction of light by ultrasonic Gulyaev-Bleustein waves is studied under Fresnel reflection conditions. It is shown that Gulyaev-Bleustein waves propagating in GaAs-AlGaAs structures can be detected by acousto-optic methods under conditions for Fresnel reflection of diffracted waves. It has been established that the considered structures are promising for design of multichannel acousto-optical deflectors and modulators. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 4, pp. 583–587, July–August, 2008.     

Study on the denoising method for the electromagnetic ultrasonic echoes from multiple interfaces

The electromagnetic ultrasound is used in the detection of interfaces of the adhesive multilayer structures to solve the unstable coupling problem in ultrasonic testing by traditional piezoelectric transducers. Based on the analysis of the transforming mechanism of electromag-netic ultrasound energy and the resultant dead zone from mutual inductance of the transducer, the wavelet filtering by soft-thresholding and adaptive noise canceling methods are used simul-taneously to the detected electromagnetic ultrasonic signals to overcome the drawbacks of the low signal to noise ratio （SNR） and the wide intrinsic dead zone of the transducer. Processed results in the interface detection of a three layered adhesive sample of steel and rubber materials demonstrate that the wavelet filtering enhances the SNR about 12dB while the adaptive noise canceling narrows the dead zone effectively.