B型套筒角焊缝缺陷相控阵超声检测定量方法

B型套筒修复作为油气管道修复的主要方式之一,在其修复的焊接过程中,该结构的环形角焊缝内部常常出现以气孔、夹渣为代表的孔型缺陷。这类缺陷由于角焊缝特殊的结构,在利用相控阵超声无损检测技术对其检测时,难以对其进行定量分析。通过数值模拟和实验,发现通过相控阵超声扇扫得到缺陷回波信号峰值与孔型缺陷直径呈正相关,为孔型缺陷的定量分析提供了一种可靠的手段。     

固-固界面退化特性的超声反射评价方法

提出了一种基于有限宽超声束反射的固-固界面退化特性评价方法,从理论和数值仿真角度进行了分析和计算。将两固体界面间的薄层简化为界面弹簧模型,以界面法向和切向劲度系数表征界面的退化程度。通过数值计算求得有限宽超声纵波束在不同入射角和界面不同退化程度下的反射横波、反射纵波的镜面反射系数。进一步地,通过建立二维有限元模型,仿真研究了有限宽超声纵波束在给定入射角及界面不同退化程度下镜面反射系数的变化规律。结果表明,反射纵波和反射横波的镜面反射系数随有限宽超声纵波束的入射角及界面劲度系数的改变而变化,且存在镜面反射系数随界面劲度系数单调且敏感变化的入射角,据此可准确评价界面的退化程度。     

阵列式压电振子超声复合喷丸强化*

为了进一步改善超声喷丸强化质量,提升工件表面残余应力和显微硬度的均匀性,对压电振子阵列型超声喷丸强化加工系统进行了改进,提出了在强化加工过程中辅助工件往复运动的方法。对改进后的压电振子阵列型超声喷丸强化加工原理进行了阐述,分析了激振片的振动特性并进行了结构尺寸优化,应用Abaqus对工件往复运动下超声喷丸强化过程进行了仿真研究,分析了在不同的工件往复运动频率下,工件表面残余应力分布情况。实验测试了在不同喷丸强化时间及工件往复运动频率下超声喷丸强化加工质量,探究了喷丸时间和工件往复运动频率对工件表面显微硬度的影响。结果表明：在压电振子阵列型超声喷丸强化过程中辅助工件往返运动,可以有效提高工件表面残余应力和显微硬度分布的均匀性,工件表面强化质量得到提升。     

非线性工作状态压电换能器匹配技术

针对压电换能器在大功率下存在复杂非线性而导致匹配参数难以优化的问题,以大功率超声金属焊接为例,通过采集测试焊接过程换能器两端电压的幅值与频率,建立换能器反谐振电阻与驱动电压有效值、频率之间的数学模型;提出基于反谐振电阻模型的最优功率匹配方法,推导了匹配电感电容的计算公式。最后实验验证了数学模型的准确性,且当换能器输入功率在最优功率附近时,匹配网络电能传输效率最高。     

基于深度学习的材料超声回波衰减预测方法

材料超声回波衰减是评价材料均匀一致性的常用方法, 针对具有复杂结构的航空发动机盘件难以进行材料底面超声回波衰减评价的问题, 本文提出了利用超声背散射波信号直接预测底面回波衰减的方法。采用10MHz聚焦探头进行超声背散射波数据的采集, 利用深度学习技术构建和训练模型,建立了基于深度学习的材料底面回波衰减预测方法, 同时讨论了采用不同信号形式的超声波信号分类识别模型的准确率差异。研究发现：基于深度学习技术可实现通过超声背散射波预测材料的底面回波衰减, 预测结果和实际底面回波衰减试验结果具有良好的一致性。     

Velocity profile measurement by ultrasonic doppler method

The ultrasonic velocity profile measuring method has been developed at PSI for application in fluid mechanics and fluid flow measurement. It uses pulsed ultrasonic echography together with the detection of the instantaneous Doppler shift frequency. This method has the following advantages over the conventional techniques: (1) an efficient flow mapping process, (2) applicability to opaque liquids, and (3) a record of the spatiotemporal velocity field. After a brief introduction of its principle, the characteristics and specifications of the present system are given. Then examples in fluid engineering for oscillating pipe flow, T-branching flow of mercury, and recirculating flow in a square cavity are described that confirm the method's advantages. Several other works under way by other investigators are introduced. A potential for in-depth study of fluid dynamics is demonstrated by several examples from an investigation of modulated wavy flows in a rotating Couette system. The position-averaged power spectrum and the time-averaged energy spectral density were used to study the dynamic characteristics of the flow, and subsequently the velocity field was decomposed into its intrinsic wave structure based on two-dimensional Fourier analysis.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

超声波促进手性双酰基氧化膦的合成

以L-薄荷醇为原料,经3步反应制备得到中间体薄荷基二氯化膦.该中间体首先通过与超声波辐射制备的微米级钠粒反应形成薄荷基膦二钠盐,然后依次经过偶联及氧化反应合成了目标产物(-)-双(薄荷基甲酰基)薄荷基氧化膦(BMMPO),并经过1 H NMR、13 C NMR、31P NMR和元素分析进行了表征.     

超声提取–离子色谱法测定土壤易溶盐中的氯离子和硫酸根离子

采用超声提取的方式,以离子色谱法测定土壤易溶盐中的氯离子和硫酸根离子。对实验条件进行了优化,色谱柱为NJ–SA–4A柱(250 mm×2 mm),保护柱为SI–92G柱(50 mm×4 mm),淋洗液为1.8 mmol/L Na_2CO_3–1.7mmol/L NaHCO_3,流量为1.0 m L/min;在40℃下,对土壤样品提取10 min。Cl~–和SO_4~(2–)在检测范围内均线性良好,线性相关系数为0.999 8,加标回收率分别为95.0%~99.0%,96.0%~101.0%,测定结果的相对标准偏差分别为1.4%,1.0%(n=4)。与传统的方法相比,该法试剂用量少,操作简单,可用于土壤易溶盐样品的测定。     

A green one-pot three-component synthesis of α-aminophosphonates under solvent-free conditions and ultrasonic irradiation using Fe3O4@SiO2-imid-PMAn as magnetic catalyst

An efficient and environment friendly process for the synthesis of α-aminophosphonates has been devised. Through a one-pot three-component condensation of various aldehydes, amines, and triethyl phosphite in the presence of Fe₃O₄@SiO₂-imid-PMAⁿ nanoparticles as magnetic catalysts under solvent-free conditions and ultrasonic irradiation, α-aminophosphonates were obtained with excellent yields. The reactions under solvent-free conditions at room temperature are compared with the ultrasonic-assisted reactions. This new procedure has notable advantages such as short reaction time, excellent yields, easy purification, and the absence of any tedious workup or purification. The aforementioned catalyst could be easily recovered by an external magnetic field and can be reused for six consecutive reaction cycles without significant loss of activity. In addition, SEM and DLS of the catalyst after the reaction cycle were investigated.