激光告警中近红外焦平面阵列探测器成像技术研究

为了提高激光探测的方位分辨率,实现对来袭激光的准确定位,选用了FPA-320x256-C型InGaAs焦平面阵列探测器作为光栅衍射型激光告警装置的核心元件。介绍了基于光栅衍射的激光波长和方向探测原理,在分析了探测器性能及参数的基础上设计了驱动电路。探测器在FPGA时序的控制下,输出模拟量通过高速AD进行采集,数据经缓存后存储在FPGA外扩的SRAM中,然后通过USB传送至PC机。上位机Labview采集原始数据,处理并显示。利用上述方法,完成了成像实验,采用波长为1 550和980 nm的激光器从不同角度进行入射,对探测得到的衍射图像进行分析,判断出零级和一级的位置,根据光栅衍射理论,计算出相应波长和二维方向入射角,结果显示波长误差小于10 nm,入射角误差小于1°。     

Load optimal design for a primary test stand facility based on a zero-dimensional load model

In order to couple the numerical simulation of a primary test stand driver with an optimal load design, a zero-dimensional wire array load model is designed based on the Saturn load model using PSPICE, which is an upgraded version of the Simulation Program with Integrated Circuit Emphasis (SPICE) designed by the ORCAD Corporation to perform circuit simulations. This paper calculates different load parameters and discusses factors influencing the driving current curve. With appropriate driving current curves chosen, further magneto-hydrodynamic calculations are carried out and discussed to provide the best results for experiments. The suggested optimal load parameters play an important role in experimental load design.     

场发射冷阴极微栅孔阵列制备技术

实现了一种采用聚苯乙烯纳米球自组装技术和微机械制造技术加工的场发射阴极用亚微米栅极微孔阵列。设计了一套完整的工艺实验方案,首先采用微球自组装技术获得了亚微米级金属网孔掩膜,然后通过反应离子刻蚀技术获得了亚微米栅极孔阵列,从而实现了集成度高、分布均匀的周期性亚微米孔洞阵列的制备,微孔集成度达到108cm-2。实验研究了氧气刻蚀聚苯乙烯微球的规律。采用金属掩膜,四氟化碳干法刻蚀二氧化硅,获得了深度为500 nm的微孔。实验结果证明该工艺方案是一种获得大面积、均匀分布、集成度高的场发射冷阴极栅孔阵列的有效方法。     

基于重叠栅工艺的硅量子点阵列的制备与调控

利用半导体量子点阵列结构实现近邻耦合是规模化扩展自旋量子比特的主要方案之一.随着量子点数目的增加,量子点阵列器件的制作工艺及参数调控均愈加复杂.本文介绍了一种重叠栅工艺结构,利用多层相互重叠且具有不同功能的栅极定义量子点,制作出结构紧凑、调控性好的量子点阵列器件,解决了工艺扩展的难题.此外,本文发展了一套高效可靠的调控方法,按顺序逐个添加量子点并建立虚拟电极,实现了对量子点参数的独立控制,并且能够高效且独立地调控各量子点中的电子数目,克服了大规模量子点阵列中电压参数配置的困难.这些方法为未来实现大规模自旋比特阵列提供了一种标准化的方案.     

Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

Patterning of triblock copolymer film and its application for surface-enhanced Raman scattering

In this paper,microphase behavior of an ABC triblock copolymer,polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide),namely PS-b-P2VP-b-PEO,was systematically studied during spin-coating and solvent vapor annealing based on various parameters,including the types of the solvent,spin speed and thickness.The morphological features and the microdomain location of the different blocks were characterized by atomic force microscope (AFM) and high resolution transmission electron microscopy (HRTEM).With increasing thickness,the order-order transition from nanopores array to the pattern of nanostripes was observed due to microdomain coarsening.These processes of pattern transformation were based on the selectivity of toluene for different blocks and on the contact time between solvent molecules and the three blocks.This work provides different templates for preparation of gold nanoparticle array on silicon wafer,which can be adopted as an active surface-enhanced Raman scattering (SERS) substrate for poly(3-hexylthiophene) (P3HT).     

Spherical harmonics MUSIC versus conventional MUSIC

With the three-dimensional symmetry and wide potential application, spherical array signal processing has been a hot research area for years. This paper devotes to the direction-of-arrival (DOA) estimation of the spherical arrays. Based on the orthogonality of the sensors’ location, MUSIC algorithm in spherical space is proposed, named as SH-MUSIC. Similar to beamspace MUSIC, spherical harmonics transformation is operated before MUSIC algorithm and a better performance is gotten because SH-MUSIC utilizes the array configuration’s orthogonality. On account of the transformation matrix’s orthogonality, spherical harmonics transformation is suggested to be operated firstly in other improved MUSIC algorithms without rejection, and it is demonstrated in beamspace MUSIC. In addition, owing to the tiny error between the steering vectors and the spherical harmonics with high order, sphere array data models including open sphere and rigid sphere are constructed. Simulation proves SH-MUSIC to be effective. Moreover, experimental data from a rigid sphere microphone array is dealt with by SH-MUSIC and the DOAs are estimated accurately.     

Influence of temperature on thermodynamic properties of substituted aromatic compounds

This work presents experimental liquid densities and ultrasonic velocities for a collection of substituted aromatic compounds (isobutylbenzene, 1,3,5-trimethylbenzene, butylbenzene, isopropylbenzene, p-xylene, m-xylene and o-xylene) at the range of temperature 278.15–323.15 K and atmospheric pressure of a collection of halogenated and aromatic hydrocarbons. Fitting equations were applied to data in order to correlate for later computer-based design. The estimation of the studied properties was made by the application of different theoretical procedures. An equation of state based on the generalised Van der Waals theory which combines the Staverman–Guggenheim combinatorial term of lattice statistics with an attractive lattice gas expression and the free length theory (FLT) showed a good response at the studied conditions.     

A data-driven,high-throughput methodology to determine tissue-specific differentially methylated regions able to discriminate body fluids

Tissue-specific differentially methylated regions (tDMRs) are regions of the genome with methylation patterns that modulate gene expression in those tissue types. The detection of tDMRs in forensic evidence can permit the identification of body fluids at trace levels. In this report, we have performed a bioinformatic analysis of an existing array dataset to determine if new tDMRs could be identified for use in body fluid identification from forensic evidence. Once these sites were identified, primers were designed and bisulfite modification was performed. The relative methylation level for each body fluid at a given locus was then determined using qPCR with high-resolution melt analysis (HRM). After screening 127 tDMR's in multiple body fluids, we were able to identify four new markers able to discriminate blood (2 markers), vaginal epithelia (1 marker) and buccal cells (1 marker). One marker for each target body fluid was also tested with pyrosequencing showing results consistent with those obtained by HRM. This work successfully demonstrates the ability of in silico analysis to develop a novel set of tDMRs capable of being differentiated by real time PCR/HRM. The method can rapidly determine the body fluids left at crime scenes, assisting the triers of fact in forensic casework.