Matrix-isolation-FTIR spectroscopy with an integrating sphere

The use of an integrating sphere for the measurement of absorption spectra of thin films is described. The thin film (for example a rare gas matrix) is grown directly on the inside surface of the sphere. Multiple reflections inside the integrating sphere lead to significant enhancement of weak absorptions of the film, increasing the sensitivity of such measurements.     

The vibrational spectra of linear and branched perchlorosilanes Si n Cl2n+2 and their simulation using a local symmetry force field

Infrared andRaman vibrational spectra ofn-Si₄Cl₁₀,n-Si₅Cl₁₂,neo-Si₅Cl₁₂ and [(SiCl₃)₃Si]₂ have been measured and assigned. A local symmetry force field has been developed to simulate vibrational spectra of all (noncyclic) perchlorosilanes Si _n Cl_2n+2 known today (n=2, 3, 4, 5, 8). The observed spectra are reproduced satisfactorily

---

Die Vibrationsspektren linearer und verzweigter PerchlorsilaneSi _n Cl _2n+2 und deren Simulierung mittels eines lokalen Symmetrie-Kraftfeldes

Zusammenfassung Infrarot- undRaman-Spektren vonn-Si₄Cl₁₀,n-Si₅Cl₁₂,neo-Si₅Cl₁₂ und [(SiCl₃)₃Si]₂ wurden aufgenommen und zugeordnet. Ein lokales Symmetrie-Kraftfeld zur Simulation der Spektren aller bisher bekannten (nicht cyclischen) Perchlorsilane Si _n Cl_2n+2 (n=2, 3, 4, 5, 8) wird angegeben. Die beobachteten Spektren werden zufriedenstellend reproduziert

     

Lattice Dynamics in LaTa2-2xNb2xVO9-δ (x=0–0.1) Solid Solutions

The oxygen nonstoichiometry (x) of LaTa_2-2xNb_2xVO₉- (x = 0–0.1) solid solutions was studied using Xray phase analysis, vibrational spectroscopy, and radiospectroscopy. A correlation was found between (x) and the unit cell volume V(x) of the solid solutions. It was shown that the infrared spectra of LaTa₂VO₉- change in passing from = 0 to 0. The structural position of the oxygen vacancy in LaTa_2-2xNb_2xVO₉- is discussed.     

Matrix-isolation FT-IR and DFT theoretical studies of the intramolecular hydrogen bonding in Mannich bases

FT-IR Ar-matrix isolated spectra were studied for dichloro- (Cl₂-MB) and tetrachloroderivatives (Cl₄-MB) of the ortho Mannich base. The spectra were analyzed based on the DFT calculated frequencies and intensities and compared with those recorded in CCl₄ solution in the region of the ν(OH) and ν(OD) vibrations. The matrix-isolated spectra are characterized by narrower ν(OH) and ν(OD) bands with much better resolved fine structure than in solution. The fine structure originates from the anharmonic coupling with the low frequency modes as well as from Fermi resonance. The ν(OD) band shapes can be reproduced exclusively by assuming the Fermi resonance with overtones and summation of the frequencies of modes into which the bridge atoms are involved. The frequency isotopic ratio (ISR) is for both compounds 1.33 while the half-width ratios are equal to 1.82 and 1.94, for Cl₂-MB and Cl₄-MB, respectively.     

Steroid polyols from the Far-Eastern starfish Henricia sanguinolenta

A new polyhydroxylated steroid (20R,24S)-5-cholestane-3,6,15,24-tetraol and a known glycoside, laeviuscoloside G, was isolated from the Far-Eastern starfish Henricia sanguinolenta, collected in the sea of Okhotsk, and characterized.     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Dynamic chirality: keen selection in the face of stereochemical diversity in mechanically bonded compounds

The template-directed syntheses, employing bisparaphenylene-[34]crown-10 (BPP34C10), 1,5-dinaphthoparaphenylene-[36]crown-10 (1/5NPPP36C10), and 1,5-dinaphtho-[38]crown-10 (1/5DNP38C10) as templates, of three [2]catenanes, whereby one of the two bipyridinium units in cyclobis(paraquat-p-phenylene) is replaced by a bipicolinium unit, are described. The crude reaction mixtures comprising the [2]catenanes all contain slightly more of the homologous [3]catenanes, wherein a "dimeric" octacationic cyclophane has the crown ether macrocycles encircling the alternating bipyridinium units with the bipicolinium units completely unfettered. X-ray crystallography, performed on all three [2]catenanes and two of the three [3]catenanes reveals co-conformational and stereochemical preferences that are stark and pronounced. Both the [3]catenanes crystallize as mixtures of diastereoisomers on account of the axial chirality associated with the picolinium units in the solid state. Dynamic (1)H NMR spectroscopy is employed to probe in solution the relative energy barriers for rotations by the phenylene and pyridinium rings in the tetracationic cyclophane component of the [2]catenanes. Where there are co-conformational changes that are stereochemically "allowed", crown ether circumrotation and rocking processes are also investigated for the relative rates of their occurrence. The outcome is one whereby the three [2]catenanes containing BPP34C10, 1/5NPPP36C10, and 1/5DNP38C10 exist as one major enantiomeric pair of diastereoisomers amongst two, four, and eight diastereoisomeric pairs of enantiomers, respectively. The diastereoisomerism is a consequence of the presence of axial chirality together with helical and/or planar chirality in the same interlocked molecule. These [2]catenanes constitute a rich reserve of new stereochemical types that might be tapped for their switching and mechanical properties.     

Darstellung und Kristallstruktur von Cadmiumazid Cd(N3)2

Preparation and Crystal Structure of Cadmium Azide Cd(N₃)₂ Solvent free, binary cadmium azide was synthesized by the reaction of cadmium carbonate and a 24 weight% solution of HN₃ in water. Cadmium azide is a colorless, crystalline powder which is highly sensitive to percussion and heat. Caution, the manipulation of Cd(N₃)₂ is very dangerous! The crystal structure was solved by single‐crystal methods and the phase purity was verified by a Rietveld refinement (Cd(N₃)₂, Pbca, no. 61; a = 7.820(2), b = 6.440(2), c = 16.073(3) Å; Z = 8, 1174 independent reflections, 64 parameters, R1 = 0.022). Cadmium azide crystallizes in a new structure type. In the crystal there are edge‐sharing Cd₂(N₃)₁₀ double octahedrons which are further connected to other units by azide bridges. Vibrational spectroscopic investigations (Raman an IR) are discussed with respect to the crystal structure data.     

Water in melts: Raman spectral investigation of the molten Ca(NO3)2·4H2O−KNO3 system

The Raman spectra of molten mixtures of Ca(NO₃)₂\4H₂O–KNO₃ have been examined, covering the concentration range of 0–70 mole% KNO₃. The frequencies in the spectra of the mixtures have been found to change slightly with concentration. Striking variations in the band shapes have been observed in the regions corresponding to the O–H stretching mode (2850–3850 cm^–1) and the v₄-NO ₃ ^– mode (700–750 cm^–). The results are discussed in terms of perturbed quasi-lattice structure for the melt, in which there could be a displacement of water molecules in the first coordination sphere around Ca²⁺ by the NO ₃ ^– ion.     

Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.