Remarkably improved cycling stability of 3D porous Cu–Sn anode for lithium-ion full cells by adjusting working voltage range

Numerous studies confirm that three dimensional porous Cu–Sn (3DP Cu–Sn) anode possesses good application prospect in light of its desirable electrochemical performance on lithium ion half cells, but there are a few related systematic researches on lithium ion full cells until now, which is indispensable before its commercialization. Herein, the effects of galvanostatic charge-discharge voltage range on the cycling stability of 3DP Cu–Sn anode for lithium ion full cells are investigated systematically. The results show that the suitable charge-discharge voltage range plays a key role in improving the reversible capacity and cycling stability of the 3DP Cu–Sn||LiCoO₂ full cell, which is closely related to maintaining the electrode structure stable by controlling the amount of Li⁺ extracted and inserted. Especially, in the voltage range of 1.2–3.9 ​V, the full cell exhibits remarkably improved electrochemical properties with the high initial reversible capacity of 2.71 ​mAh cm⁻² and 71.95% capacity retention upon 80 cycles. We believe that this work can provide a significant reference for the practical application of porous Sn-based anodes.     

二硫化锡纳米片阻变存储器的制备与性能

采用水热法合成了尺寸为50~100 nm的二硫化锡纳米片,并首次以二硫化锡作为阻变层材料的阻变存储器（Cu/PMMA/SnS₂/Ag,PMMA=聚甲基丙烯酸甲酯）,对其阻变性能进行了研究。结果表明： Cu/PMMA/SnS₂/Ag阻变存储器的开关比约10⁵,耐受性2.7×10³。在上述2项性能指标达到较优水平的同时,开态与关态电压分别仅约为0.28与-0.19 V。     

Sulfone-based high-voltage electrolytes for high energy density rechargeable lithium batteries:Progress and perspective

Further enhancement in the energy density of rechargeable lithium batteries calls for high-voltage cathode materials and stable anodes,as well as matched high-voltage electrolytes without compromising the overall property of batteries.Sulfone-based electrolytes have aroused great interest in recent years owing to their wide electrochemical window and high safety.However,significant challenges such as the complexity of synthesis,high melting point(typically above room temperature),high viscosity,and their poor compatibility with graphite-based anodes have drastically impeded their practical applications.In this review,recent progress of sulfone solvents in high energy density rechargeable lithium batteries is summarized theoretically and experimentally.More importantly,general improvement methods of sulfone-based electrolytes,such as adding additives and cosolvents,structural modifications of sulfo ne,superconcentrated salt strategy are briefly discussed.We expect that this review provides inspiration for the future developments of sulfone-based high-voltage electrolytes(SHVEs) and their widespread applications in high specific energy lithium batteries.     

Effect of relative humidity on current–voltage characteristics of monopolar DC wire-to-plane system

This paper deals with the DC monopolar corona discharge in wire-to-plane geometry under variable humid air conditions. The classical formulas of Townsend commonly used for the current–voltage characteristics were used to determine the various corona parameters for the both polarities of the corona discharge. A circular biased probe has been adapted to the plane and is used to measure the ground plane current density and electric field during the monopolar corona discharge. A new approach to the problem of corona discharge in transmission system has been described in this paper. The effect of varying the humidity and wires diameter is also investigated. The values of the electric field and the current density are maximum beneath the corona wire and decrease when moving away from them and the current–voltage characteristics follow the quadratic Townsend's law. The experimental results show that the monopolar corona discharge is strongly affected by the air humidity. The current density and the electric field are measured and compared with the computed values. The agreement between the calculated values and those obtained experimentally is satisfactory. The per unit electric field and current density are also represented by a unique function.     

关于开设内光电效应实验的探索与思考

介绍了开设以内光电效应为理论基础的半导体光电器件的重要性和迫切性,并详细介绍了内光电效应的理论与半导体光电器件的分类和应用前景。     

Effect of gate engineering in JLSRG MOSFET to suppress SCEs: An analytical study

In this work, an analytical model of gate-engineered junctionless surrounding gate MOSFET (JLSRG) has been proposed to uncover its potential benefit to suppress short-channel effects (SCEs). Analytical modelling of centre potential for gate-engineered JLSRG devices has been developed using parabolic approximation method. From the developed centre potential, the parameters like threshold voltage, surface potential, Electric Field, Drain-induced Barrier Lowering (DIBL) and subthershold swing are determined. A nice agreement between the results obtained from the model and TCAD simulation demonstrates the validity and correctness of the model. A comparative study of the efficacy to suppress SCEs for Dual-Material (DM) and Single-Material (SM) junctionless surrounding gate MOSFET of the same dimensions has also been carried out. Result indicates that TM-JLSRG devices offer a noticeable enhancement in the efficacy to suppress SCEs by as compared to SM-JLSRG and DM-JLSRG device structures. The effect of different length ratios of three channel regions related to three different gate materials of TM-JLSRG structure on the SCEs have also been discussed. As a result, we demonstrate that TM-JLSRG device can be considered as a competitive contender to the deep-submicron mainstream MOSFETs for low-power VLSI applications.     

Voltage‐Driven Reversible Insertion into and Leaving from a Lipid Bilayer: Tuning Transmembrane Transport of Artificial Channels

Three new artificial transmembrane channel molecules have been designed and synthesized by attaching positively charged Arg‐incorporated tripeptide chains to pillar[5]arene. Fluorescent and patch‐clamp experiments revealed that voltage can drive the molecules to insert into and leave from a lipid bilayer and thus switch on and off the transport of K⁺ ions. One of the molecules was found to display antimicrobial activity toward Bacillus subtilis with half maximal inhibitory concentration (IC₅₀) of 10 μM which is comparable to that of natural channel‐forming peptide alamethicin.     

Adaptive nematic liquid crystal lens array with resistive layer

ABSTRACT

We propose an adaptive nematic liquid crystal (LC) lens array using a dielectric layer with low dielectric constant as resistive layer. With the resistive layer and periodic-arranged iridium tin oxide (ITO) electrodes, the vertical electric field across the LC layer varies linearly over the lens aperture is obtained in the voltage-on state. As a result, a centrosymmetric gradient refractive index profile within the LC layer is generated, which causes the focusing behaviour. As a result of the optimisation, a thin cell gap which greatly reduces the switching time of the LC lens array can be achieved in our design. The main advantages of the proposed LC lens array are in the comparatively low operating voltage, the flat substrate surface, the simple electrodes, and the uniform LC cell gap. The simulation results show that the focal length of the LC lens array can be tuned continuously from infinity to 3.99 mm by changing the applied voltage.     

The effects of coil–stretch transition behavior of polyfluorene inks on single droplet formation during inkjet printing

For drop-on-demand (DOD) inkjet printing, stable and single ink droplet formation without satellite dots is the key to improve the print quality. The formation of stable and single droplet is influenced by filament break up and the polymer chain’s coil–stretch transition behavior. In this paper, the droplet formation behaviors of polyfluorene (PFO) ink at various driving voltages (V), polymer chain’s coil–stretch transition mechanism and its effects on single ink droplet formation are investigated. It indicates that when 58 < V ≤ 63 V, a single and stable droplet is formed with a pulse time of 38.5 μs. At this stage, the Weissenberg number (Wi) < 0.5, the PFO molecular chain is coiled to guarantee stable and single droplets. When V > 63 V, Wi > 0.5, the PFO molecular chain is stretched because of the high hydrodynamic forces, resulting unwanted satellite droplets. When 55 < V ≤ 58 V, the droplet shrinks into the nozzle, which indicates that the kinetic energy supplied by the deformation of the piezoelectric transducer isn't enough to force the droplet to be jetted from the nozzle.     

Dynamic and reversible electrowetting with low voltage on the dimethicone infused carbon nanotube array in air

Unremitting efforts have been intensively making for pursuing the goal of the reversible transition of electrowetting owing to its vital importance to many practical applications, but which remains a major challenge for carbon nanotubes due to the irreversible electrochemical damage. Herein, we proposed a subtly method to prevent the CNT array from electrochemical damage by using liquid medium instead of air medium to form a liquid/liquid/solid triphase system. The dimethicone dynamically refills in CNT arrays after removing of voltage that makes the surface back to hydrophobic, which is an elegant way to not only decrease energy dissipation in electrowetting process but also obtain extra energy in reversible dewetting process. Repeated cycles of in situ experiments showed that more than four reversible electrowetting cycles could be achieved in air. It worth mention that the in situ reversible electrowetting voltage of the dimethicone infused CNT array has been lowered to 2 V from 7 V which is the electrowetting voltage for the pure CNT array. The surface of the dimethicone infused CNT array can maintain hydrophobicity with a contact angle of 145.6° after four cycles, compared with 148.1° of the initial state. Moreover, a novel perspective of theoretical simulations through the binding energy has been provided which proved that the charged CNTs preferred binding with water molecules thereby replacing the dimethicone molecules adsorbed on the CNTs, whereas reconnected with dimethicone after removing the charges. Our study provides distinct insight into dynamic reversible electrowetting on the nanostructured surface in air and supplies a way for precise control of wettability in surface chemistry, smart phase-change heat transfer enhancement, liquid lenses, microfluidics, and other chemical engineering applications.