自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。     

Highly polarized dithiafulvenes: synthesis and nonlinear optical properties

Push-pull dithiafulvenes with reduced bond length alternation (BLA) and high optical nonlinearities have been prepared. The interplay between the proaromaticity of the donor and the structural and optical properties of these merocyanines is discussed. The donor ability of dithiafulvenes can reach that of ferrocene or dialkylaminophenyl groups.     

A telescope illumination system for a wide-field endoscope

Endoscopic illumination systems conduct light down a built-in fibre-optic bundle to illuminate the object. Many modern endoscopes employ wide-field imaging optical systems and therefore require an illuminating beam of large divergence. This is commonly provided by placing a strong diverging lens at the far end of the fibre bundle, but it results in a poor uniformity of illumination in the object space. This paper describes the design of a telescopic illumination system to overcome this problem.     

响应矩阵分析方法在BEPC储存环上的应用

由于储存环中各种元件误差的存在, 机器的实际运行模式与设计模式有一定的偏差. 目前广泛开展的响应矩阵方法研究, 可以分析出磁铁元件以及束流位置测量元件的误差, 使束流基本参数得到校正. 介绍了用响应矩阵分析方法, 在BEPC储存环上进行的局部轨道校正的实验研究, 以及BEPC储存环束流参数校正的模拟研究.     

An improved injector bunching geometry for ATLAS

The bunching system of the ATLAS positive ion injector (PII) has been improved by relocating the harmonic buncher to a point significantly closer to the second stage sine-wave buncher and the injector LINAC. The longitudinal optics design has also been modified and now employs a virtual waist from the harmonic buncher feeding the second stage sine-wave buncher. This geometry improves the handling of space charge for high-current beams, significantly increases the capture fraction into the primary rf bucket and reduces the capture fraction of the unwanted parasitic rf bucket. Total capture and transport through the PII has been demonstrated as high as 80% of the injected dc beam while the population of the parasitic, unwanted rf bucket is typically less than 3% of the total transported beam. To remove this small residual parasitic component a new traveling-wave transmission-line chopper has been developed reducing both transverse and longitudinal emittance growth from the chopping process. This work was supported by the U.S. Department of Energy under contract W-31-109-ENG-38.     

光学系统的等效变换

本文在普遍情况下使用矩阵方法详细讨论了光学系统的等效变换,证明光线变换矩阵为的光学系统当C≠0时可等效为一个薄透镜,当C=0时等效为一个薄透镜组。文中所得结果能用于分析光线或光束通过复杂光学系统的变换和多元件光腔的问题。     

一种适于自适应光学的旋转软刀口波面传感器的研究

利用傅里叶光学理论,证明了一种新型波面传感器——旋转软刀口波面传感器的概念.在经典刀口法的刀口区,以渐变透过率代替突变透过率函数,在光瞳象面上可获得反映光瞳面位置待测波面位相梯度及位相梯度方向的调制信号.文中给出了实验结果和讨论.     

Acousto-optic mode coupling of partially coherent light in two-mode optical fibers

An acoustic pulse propagating on a two-mode fiber can act as a beam splitter in a scanning interferometer. When this device is employed in white-light interferometry, the effects of distributed coupling and dispersive interferometer arms need to be considered. A theory suitable for treating acousto-optic interaction of partially coherent light in a moving interaction region was developed. It was found that differential optical dispersion should be negligible and the acoustic pulse length short. Also the coherence time should be short but long compared to the intermodal group delay difference over a pulse length. Experiments with long acoustic pulses were performed, and fairly good agreement with theory was obtained.