激光多普勒测速技术在气液两相流中的应用

本文采用激光颗粒动态分析仪(PDA)测量了钢包底部喷吹气液两相流中气泡的直径和气泡上升速度的分布;采用激光多普勒测速仪(LDA)测量了气液两相区和液体单相循环区液体速度场的分布。测量结果表明:气泡在脱离喷嘴上浮一定距离后,其大小基本保持不变;在气液两相区中,气泡速度和液体速度的分布均服从高斯分布;液体在单相区作循环流动,在侧壁与底部交接处,存在液体流动的“死区”。     

The flow structure of dilute gas-particle suspensions behind a shock wave moving along a flat surface

The asymptotic and numerical investigations of shock-induced boundary layers in gas-particle mixtures are presented.The Saffman lift force acting on a particle in a shear flow istaken into account.It is shown that particle migration across the boundary layer leads tointersections of particle trajectories.The corresponding modification of dusty gas model isproposed in this paper.The equations of two-phase sidewall boundary layer behind a shock wave moving at aconstant speed are obtained by using the method of matched asymptotic expansions.Themethod of the calculation of particle phase parameters in Lagrangian coordinates isdescribed in detail.Some numerical results for the case of small particle concentration aregiven.     

基于两阶段灰色聚类模型的新疆经济社会发展水平评价研究

通过两阶段灰色聚类模型选择影响经济社会发展水平,基础设施建设,相关产业发展水平以及区域经济基础四个一级指标的10个二级指标来构建区域经济社会发展水平评价指标体系,以2013年新疆14地州市相关数据为样本,运用基于改进的中心点混合三角白化权函数把新疆各地州市从经济社会发展的角度划分成4个区域,为"新丝绸之路经济带"下新疆各地州的经济与社会发展定位提供依据最后找出属于三、四级经济圈内地区经济与社会发展落后的原因并提出相关建议.     

大长径比点火管高密实火药床点传火过程两相流的数值模拟

设计了某中心点火管,完成了该点火管的点传火实验,针对该点火管长径比大、装填密度高的特点,建立了点火管内气固两相流动和燃烧过程的一维两相流模型,并进行了数值模拟。计算结果与实验结果良好符合,说明计算模型能够准确描述点火管内的实际物理化学过程,计算程序参数取值合理,该计算程序可为此类点火管各种结构尺寸及装填条件下的点传火性能分析及优化计算提供充分的理论依据和方法。并且,根据计算结果初步分析了该结构及装填条件下点火管的点传火性能,为下阶段工程优化设计提供参考     

Numerical prediction of droplet dynamics in turbulent flow,using the level set method

In the present article, the droplet dynamics in turbulent flow is numerically predicted. The modelling is based on an interfacial marker-level set (IMLS) method, coupled with the Reynolds-averaged Navier–Stokes (RANS) equations to predict the dynamics of turbulent two-phase flow. The governing equations for time-dependent, two-dimensional and incompressible two-phase flow are described in both phases and solved separately using a control volume approach on structured cell-centred collocated grids. The topological changes of the interface are predicted by applying the level set approach. The kinematic and dynamic conditions on the interface separating the two phases are satisfied. The numerical method proposed is validated against a well-known computational fluid dynamics problem. Further, the deformation and breakup of a single droplet either suddenly moved in air or exposed to turbulent stream are numerically investigated. In general, the developed numerical method demonstrates remarkable capability in predicting the characteristics of complex turbulent two-phase flows.     

第一阶段原有单纯形和对偶单纯形算法的计算比较

线性最优化广泛应用于经济与管理的各个领域.在线性规划问题的求解中,如果一个初始基本可行解没有直接给出,则常采用经典的两阶段法求解.对含有"≥"不等式约束的线性规划问题,讨论了第一阶段原有单纯形法和对偶单纯形法两种算法形式,并根据第一阶段问题的特点提出了改进的对偶单纯形枢轴准则.最后,通过大规模数值试验对两种算法进行计算比较,结果表明,改进后的对偶单纯形算法在计算效率上明显优于原有单纯形算法.     

A class of weighted estimators for additive hazards model in case-cohort studies

Case-cohort sampling is a commonly used and efficient method for studying large cohorts. In many situations, some covariates are easily measured on all cohort subjects, and surrogate measurements of the expensive covariates also may be observed. In this paper, to make full use of the covariate data collected outside the case-cohort sample, we propose＇a class of weighted estimators with general time-varying weights for the additive hazards model, and the estimators are shown to be consistent and asymptotically normal. We also identify the estimator within this class that maximizes efficiency, and simulation studies show that the efficiency gains of the proposed estimator over the existing ones can be substantial in practical situations. A real example is provided.     

注汽油井蒸气汽液比的折射率法测量研究

给油田的油井中注入高温高压蒸气时,从井口到井底连续地查明汽液比对节省能源和提高产出率意义重大。由于干蒸气和水的折射率不同,汽液的比例可以从汽液两相流的折射率响应特性反映出来。研制的测量装置采用蓝宝石作为折射率敏感的探测头,直接对汽液两相流的比例变化产生响应,能够应用于高温高压及狭窄工作空间的输汽环境中。装置在锅炉输汽管道中的实测响应曲线反映了输汽过程中汽液比的真实变化。该装置还在井深800m,井口蒸气温度270℃、压力10Mpa的油田注汽井中进行测量,测得的结果对注汽法采油的井况分析具有一定的作用。     

微小圆通道内流动沸腾换热特性的研究

微小通道内相变换热具有热流密度高、单位体积内换热面积大、结构紧凑等特点,成为高效紧凑式换热器设计的重要途径。本文以氟利昂R113为工质,完成了0.7、1.1和1.4 mm的圆形小通道内的流动沸腾实验,对小通道内流动沸腾换热特性进行了分析,拟合了计算沸腾换热特性的实验关联式,为工程实际应用提供参考。