Bi-2223/Ag高温超导带临界电流各向异性的实验测量及分析

本文介绍了Bi-2223/Ag高温超导带临界电流各向异性的实验测量方法及原理,指出了在不同磁场方向(与超导带面夹角)下,Bi-2223/Ag带临界电流随直流背景磁场的变化规律以及实验应注意的问题.Bi-2223/Ag带材的各向异性决定了其临界电流对垂直于带材表面的磁场非常敏感,这是该带材在高温超导磁体等强电应用方面的不利因素.     

On the structure of graded <Emphasis Type="Italic">λ</Emphasis>-Hopf algebras

Let G be an abelian group, B the G-graded λ-Hopf algebra with A being a bicharacter on G. By introducing some new twisted algebras （coalgebras）, we investigate the basic properties of the graded antipode and the structure for B. We also prove that a G-graded λ-Hopf algebra can be embedded in a usual Hopf algebra. As an application, it is given that if G is a finite abelian group then the graded antipode of a finite dimensional G-graded A-Hopf algebra is invertible.     

关于余模余代数的L-R smash余积和L-R扭曲余积

由一种新方法给出了L-R smash余积的Mashke定理,并研究了L-R扭曲余积与左(右)扭曲偶的关系.     

Electro-mechanical behavior of single twisted high-temperature superconducting tape under transverse Lorentz force

In recent years, several cabling methods of high temperature superconducting (HTS) cable have been proposed; e.g., the conductor on a round core cable (CORC), the Roebel assembled coated conductor cable, the helical twisted stacking-tape cable (TSTC) and the twisted-stack slotted core HTS cable (TSSC). These cabling methods allow the high temperature superconducting tapes widely used in the high-field magnets. The single superconducting tape performance under applied loads directly relates to the transport performance of the cable and the choice of the cabling method. In this paper, we investigate the effect of twisting morphology on the electro-mechanical properties of HTS tapes. Particular attention is given to the transverse Lorentz force of a pre-twisted HTS tape. The analytical solution of the deflection of the HTS tape under transverse Lorentz force is derived. Then, the current distribution and AC loss of the tape are calculated by using H-formulation. The effects of twist angle and loading conditions are examined for different HTS tape lengths. The results show that the stiffness resistance ability to Lorentz force of the HTS tape can be increased in several ranges by increasing the twist angle. The twisting structure can also reduce current degradation and AC loss, and thus enhance the transport capacity of HTS tape. This study helps understand the electro-mechanical properties of pre-twisted HTS tapes and provides theoretical reference for the design of novel HTS cable structures.     

一种铁基超导带材交流损耗的测量

近年来铁基超导材料的发现掀起了又一轮新型超导材料研究的热潮,各种配方的铁基超导材料不断被制备出来,转变温度也不断提高,中国科学家在该领域取得了十分突出的成果,制备出了多种铁基超导材料,但对其交流损耗特性研究鲜有报道,而实际应用中交流损耗的特性又十分重要,因此搭建了一套采用探测线圈法的交流损耗测量平台,测试了一种中国科学院电工研究所采用PIT工艺制作的单芯铁基超导带材的交流损耗。该文介绍了采用探测线圈法测量超导材料交流损耗的一种测量平台的搭建与标定,以及采用标定过的测量平台在液氦温度下测量的一种采用PIT工艺制作的单芯铁基超导带材的交流损耗;并与计算得到的铁基带材超导芯的磁滞损耗和包套的涡流损耗进行了比较分析,得出了其交流损耗与背景磁场频率成正比,其涡流损耗可以忽略的结论。     

基于次态卡诺图的移位寄存器型计数器的自启动设计

分析了移位寄存器型计数器工作时的状态转换过程,提出了移位寄存器型计数器的设计可在保持右移移位寄存器内部结构不变的基础上,只求解第1位触发器激励函数的设计方法.分析了触发器次态函数与激励函数的关系,提出了在次态函数卡诺图上进行激励函数最小化求解与检查无效状态所赋次态值及逻辑修改同步进行的移位寄存器型计数器自启动设计方法.     

Experimental design to measure the anchoring energy on substrate surface by using the alternating-current bridge

The anchoring property of the substrate surface of liquid crystal cells plays an important role in display and nondisplay fields. This property directly affects the deformation of liquid crystal molecules to change the phase difference through liquid crystal cells. In this paper, a test method based on the alternating-current bridge is proposed to determine the capacitance of liquid crystal cells and thus measure the anchoring energy of the substrate surface. The anchoring energy can be obtained by comparing the capacitance–voltage curves of twisted nematic liquid crystal cells with different anchoring properties in experimental and theoretical results simulated on the basis of Frank elastic theory. Compared with the other methods to determine the anchoring energy, our proposed method requires a simple treatment of liquid crystal cells and allows easy and high-accuracy measurements, thereby expanding the test ideas on the performance parameters of liquid crystal devices.     

流延法制备高锂离子电导Li_(1.4)Al_(0.4)Ti_(1.6)(PO_4)_3固态电解质及其环氧树脂改性

以溶胶凝胶法合成的高纯Li_(1.4)Al_(0.4)Ti_(1.6)(PO_4)_3(LATP)纳米晶体粉末为原料,通过流延法成膜,在950℃下煅烧5 h合成LATP固态电解质片;对其进行环氧树脂改性后,能量色散X射线光谱元素图像表明环氧树脂完全浸入LATP内部,可以有效防止水渗透.研究发现流延法合成的LATP固态电解质在25℃?C时电导率高达8.70×10~(-4)S·cm~(-1)、活化能为0.36 eV、相对密度为89.5%.经过环氧树脂改性后电导率仍高达3.35×10-4S·cm-1、活化能为0.34 e V、相对密度为93.0%.高电导隔水的环氧树脂改性LATP固态电解质可作为锂金属保护薄膜用于新型高比容量电池.     

YBCO带材低熔点焊接接头研究进展

以YBa_(2)Cu_(3)O_(7)(YBCO)带材为代表的二代高温超导带材被广泛应用于各类超导装备中,由于YBCO超导带材生产长度的限制,其接头技术将在带材的实用化发展中起到至关重要的作用,其中低熔点焊料焊接接头技术由于其工艺简单且能够满足目前二代高温超导材料的应用需求,成为现阶段接头制备的主流技术.本文基于YBCO基本属性,结合目前国内外的YBCO带材生产现状,系统全面地调研了低熔点焊料焊接接头技术的制作工艺及其性能的影响因素,明确了低熔点焊料焊接接头的关键影响因素,梳理了二代高温超导带材接头的焊接工艺流程,为二代高温超导带材接头的制备提供参考。     

Playback performance of perpendicular magnetic recording tape media for over-50-TB cartridge by facing targets sputtering method

Perpendicular magnetic recording tape medium with laminated soft magnetic underlayers was successively formed on a 4.5 μm thin plastic film by the facing targets sputtering method at room temperature. The tape medium showed extremely high SNR values with sharp transitions in playback tests by a drum tester, compared to a linear format commercial tape medium. An areal density of 45.0 Gb/in.² of perpendicular tape medium was confirmed by a high-resolution contact tester. These results suggest that the perpendicular recording tape medium by the facing targets sputtering method is a promising candidate for a tape cartridge of over 50-TB.