Single-phase AC losses in prototype HTS conductors for superconducting power transmission lines

We report single-phase AC loss measurements on 8-, 4-, and 3-layer, multi-strand, HTS prototype conductors for power transmission lines. We use both calorimetric and electrical techniques. The agreement between the two techniques suggests that the interlayer current distribution in 1-m long conductors are representative of those in long conductors. The losses for the 8- and 4-layer conductors are in rough agreement, with the 8-layer losses being somewhat lower. The 3-layer conductor losses are substantially higher — probably due to unbalanced azimuthal currents for this configuration.     

中国优秀物理学家的杰出代表——葛庭燧

回顾介绍了葛庭燧院士的生平和他在科学研究、人才培养方面所作出的贡献,展示了他的高尚情操,分析了他取得卓著成就的原因.     

Magnetic evaluation of advanced metal-evaporated tape in an advanced linear tape drive

Demand for increased data storage has resulted in the development of various types of magnetic tapes. To achieve higher recording density, tape manufacturers are developing thin-film tapes, such as advanced metal-evaporated (AME) tape, for use in linear tape drives. In recent studies, these new AME tapes have demonstrated sustainable mechanical durability at low tensions suitable for use in linear tape drives. An evaluation of the magnetic performance of these AME tapes including the impact of tape cupping and initial edge quality was the goal of this study. Head output, dropouts, head–tape interface friction, and lateral tape motion (LTM) were monitored throughout testing. As track widths continue to narrow, LTM has become one of the critical limitations of magnetic performance. To more accurately measure LTM during drive development, a new method involving the output voltage of a head-read element that has been adjusted to be halfway off the recorded track on tape was implemented (LTM_M). It is shown that positively cupped AME tapes will result in similar head output and fewer dropouts than the current MP tapes. The negatively cupped AME sample produced the lowest head output data and the highest amount of dropouts of all the tapes evaluated in this investigation. All the tapes evaluated demonstrated similar values of LTM when monitored at the center of the tape. When LTM was monitored at the lower edge of the tape, the positively cupped AME tape with the worst relative edge contour length resulted in the highest LTM_M. As found in previous studies, AME tapes produced slightly lower values of coefficient of friction than the MP tapes. From this investigation, positively cupped AME tapes with good initial relative edge contour length are recommended for use in linear tape drives, similar to those used in this study.     

Transamidation of Amides and Amidation of Esters by Selective N–C(O)/O–C(O) Cleavage Mediated by Air- and Moisture-Stable Half-Sandwich Nickel(II)–NHC Complexes

The formation of amide bonds represents one of the most fundamental processes in organic synthesis. Transition-metal-catalyzed activation of acyclic twisted amides has emerged as an increasingly powerful platform in synthesis. Herein, we report the transamidation of N-activated twisted amides by selective N–C(O) cleavage mediated by air- and moisture-stable half-sandwich Ni(II)–NHC (NHC = N-heterocyclic carbenes) complexes. We demonstrate that the readily available cyclopentadienyl complex, [CpNi(IPr)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), promotes highly selective transamidation of the N–C(O) bond in twisted N-Boc amides with non-nucleophilic anilines. The reaction provides access to secondary anilides via the non-conventional amide bond-forming pathway. Furthermore, the amidation of activated phenolic and unactivated methyl esters mediated by [CpNi(IPr)Cl] is reported. This study sets the stage for the broad utilization of well-defined, air- and moisture-stable Ni(II)–NHC complexes in catalytic amide bond-forming protocols by unconventional C(acyl)–N and C(acyl)–O bond cleavage reactions.     

背景磁场下Y系超导带材临界电流的测量

高温超导电力装置一般工作于低磁场情况下,测量超导带材在低场下的临界电流特性非常重要.文中通过自行设计的实验平台,采用四引线法对Y系超导带材低场下的临界电流特性进行了测量,得到了带材临界电流随外加磁场变化的曲线,并与Bi系带材低场下的临界电流特性进行比较.     

二代高温超导带材的机械特性研究进展

以 YBCO(YBa2Cu3 O7 -δ ) 为代表的二代高温超导带材因具有高临界转变温度、 高临界磁场和强载流能力,受到了国际学界高度关注, 在各个领域具有广泛的应用前景. 二代高温超导带材在绕制、 冷却和运行过程中会受到不同来源的外力作用, 且超导带材的韧性、 延展性较差, 因此其机械性能是影响安全性与设备运行可靠性的关键.本文基于二代超导带材各向异性的特点, 对超导带材轴向、 横向、 弯曲三个方向的静态机械性能及疲劳性能进行了介绍. 同时, 也对超导带材各方向机械性能的测试方法、 影响因素及机理进行了总结     

AC transport current loss of assembled conductor of HTS tapes

We study experimentally and theoretically the AC transport current loss characteristics of a tape in multiple tapes assembled in single layer and subject to external field produced by transport currents of adjacent tapes. We measured the AC transport current losses of a Bi2223 silver-sheathed tape in a single layer arrangement of three tapes using our newly developed potential leads arrangement to avoid spurious loss components caused by the magnetization in the adjacent tapes. In the paper, the influence of the external AC field produced by adjacent tapes on the loss characteristics is studied based on the experimental results and theoretical analysis.     

扭化的Atiyah-Singer算子(I)

本文证明黎曼流表上的ｄｅ Ｒｈａｍ以及Ｓｉｇｎａｔｕｒｅ算子都同构于扭化的Ａｔｉｙａｈ－Ｓｉｎｇｅｒ算子。这两类算子的局部指数定理和局部Ｌｅｆｓｃｈｅｔｚ不动点公式都可以从扭化的Ａｔｉｙａｈ－Ｓｉｎｇｅｒ算子得到。     

Experimental design to measure the anchoring energy on substrate surface by using the alternating-current bridge

The anchoring property of the substrate surface of liquid crystal cells plays an important role in display and nondisplay fields. This property directly affects the deformation of liquid crystal molecules to change the phase difference through liquid crystal cells. In this paper, a test method based on the alternating-current bridge is proposed to determine the capacitance of liquid crystal cells and thus measure the anchoring energy of the substrate surface. The anchoring energy can be obtained by comparing the capacitance–voltage curves of twisted nematic liquid crystal cells with different anchoring properties in experimental and theoretical results simulated on the basis of Frank elastic theory. Compared with the other methods to determine the anchoring energy, our proposed method requires a simple treatment of liquid crystal cells and allows easy and high-accuracy measurements, thereby expanding the test ideas on the performance parameters of liquid crystal devices.     

Banana-shaped mesogens: effect of lateral substituents on seven-ring esters containing a biphenyl moiety

The synthesis and characterization of five homologous series of symmetrical compounds composed of banana-shaped molecules containing a biphenyl moiety are reported. All these compounds are non-Schiff's bases and are esters. The effects of lateral substituents such as fluoro, methyl and ethyl in the side arms of these molecules are examined. These substituents have a strong influence in reducing the clearing temperatures. Banana phases such as B1, B2 and B6 were observed in the above series of compounds. The mesophases were characterized by a combination of polarizing optical microscopy, differential scanning calorimetry, X-ray diffraction and electro-optic studies.