甲醇与蓖麻油混合物运动粘度的实验研究

利用改型的乌别洛特毛细管粘度计,本文对243～353K温度范围内对质量配比为98.8:1.2的甲醇与蓖麻油混合物的运动粘度进行了实验研究,运动粘度测量结果的不确定度为1.06%,利用得到的实验数据拟合了甲醇 蓖麻油二元混合物的运动粘度方程.方程与实验数据最大偏差为3.31%,平均偏差为1.11%.     

四川乌龙茶香气化学成分的剖析

四川乌龙茶在低温减压蒸馏所得香气浓缩物经气相色谱-质谱联用测定,以气相色谱保留值验证,鉴定出19个化合物,它们是:丙酮,乙酸乙酯,顺-3-己烯醇-[1],乙酸顺-3-己烯酯,苯甲醇,反-芳樟醇氧化物(呋喃型),顺-芳樟醇氧化物(呋喃型),芳樟醇,苯乙醇,反-芳樟醇氧化物(吡喃型),丁酸顺-3-己烯酯,香叶烯,己酸顺-3-己烯酯,茉莉酮,橙花叔醇,金台欢醇,茉莉酮酸甲酯,正十六烷和2,6,10,14-四甲基十五烷。     

羰基铁催化黄樟油素、丁香酚异构化反应的研究——Ⅰ.异黄樟油素、异丁香酚的合成

本文报道了异黄樟油素、异丁香酚的新合成途径,即在羰基铁光催化下或多核羰基铁加热催化下,使黄樟油素、丁香酚异构化。其转化率几乎是定量的。反应产物经GC,GC/MC分析及UV,IR,NMR,折光率的鉴定,证明合成过程中发生了异构化反应,而且产物以反式异构体为主。     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

缬草根化学成分的研究

本文报道了湖南花坦县产的缬草根的化学成分，用气相色谱－色谱－计算机联用和波谱技术鉴定了缬草根中的４４个组分，其中乙酸里哪醇酯，２－蒈烯，马拶铃烯，瓦伦烯，香橙烯，愈创木烯，异尼醇，乙酸金合欢酯，邻苯二甲酸二异辛酯，６，１３－二甲基－十四烷酸和２－甲基十六烷酸甲酯等化合物是在缬草根中首次发现的，对缬草根中的氨基酸和微量元素也进行了测定。     

毛蕊杜鹃挥发油化学成分研究

毛蕊杜鹃(Rhododendron tubulosum Ching ex wang wei-yei)系杜鹃花科杜鹃花属植物,分布于四川、西藏、甘肃和青海,其中青海分布最广,藏民常作为单方草药用于治疗肺炎和老年慢性气管炎,具有镇咳、祛痰作用,本文用自制的同时水汽蒸馏-溶剂萃取装置,从采自青海玉树州的毛蕊杜鹃鲜叶和嫩枝提取挥发油,用毛细管气相色谱-质谱和Kovats指数双重定性法对     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

Dynamic Interfacial Tension Behavior of Water/Oil Systems Containing In situ-Formed Surfactants

Time-dependent interfacial tension (IFT) has been investigated for an interfacially reactive immiscible system composed of model-acidified oil and alkaline water. The acidified oil was composed of either lauric acid or linoleic acid dissolved in n-dodecane. Drop volume tensiometry was employed to measure the interfacial tension between the two phases. In the case of lauric acid, the IFT value was found to decrease sharply with increasing alkali concentration, even at low drop formation times. In the case of linoleic acid, the IFT decrease with the drop formation time was more gradual, especially at low alkali concentration. The rate of formation of the interfacial area was also found to be dependent on alkali concentration.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Essential Oil of Arischrada korolkowii from the Chatkal Mountains of Uzbekistan

The herbal parts of Arischrada korolkowii (Regel et Schmalh.) Pobed. (Lamiaceae) growing in Uzbekistan were hydrodistillated to yield 1.1% of essential oil. The essential oil was analyzed by GC/MS. Eighty eight compounds were characterized representing 98% of the essential oil with 1,8-cineole (29.3%), camphor (9.8%), -caryophyllene (8.5%), bornyl acetate (7.7%), caryophyllene oxide (7.2%), and borneol (5.6%) as the main constituents.