Particle circulation and oxygen mass transfer in an immobilized cell bioreactor

Two important considerations in the design of an aerobic particulate immobilized cell bioreactor are the provision of sufficient oxygen to maintain the desired metabolism of the immobilized organism, and the biomass holdup (which is proportional to the number of immobilized cell particles in the reactor). The Circulating Bed Reactor, a reactor developed for use with those forms of immobilization that result in particles of essentially neutral buoyancy, operates with an expanded bed of circulating particles. The particle number density attainable in such a reactor has been found to be dependent upon the circulation cell aspect ratio, the individual particle properties, the static bed voidage of the particles, and the superficial gas velocity. The oxygen mass transfer characteristics have been found to be dependent upon the circulatory nature of the system, the particle (solids) holdup, the particle porosity, and the superficial gas velocity.     

Pressure and volume dependence of thelo-to phonons in InAs

The pressure dependence of thelo-to phonons in InAs has been investigated by Raman scattering using the diamond anvil cell. Indium arsenide transforms, presumably to the rock-salt structure at 70±1 kbar. The mode Grüneisen parameters for thelo-to phonons are γ _lo =0.99±0.03, γ _to =1.2±0.03 respectively. The effective charge,e* _T , for InAs decreases slightly with pressure and this trend is in accordance with the behaviour of other III–V zinc blende structured semiconductors: The structural phase transition is discussed in the light of theoretical calculations for phase stability of III–V compounds, as well as recent high pressure x-ray diffraction studies.     

Electric conductivity in a fibrous porous medium with thin but polarized double layers

The electric conduction in the fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders having an arbitrary zeta potential filled with the solution of a symmetrically charged electrolyte is analytically examined. The thickness of the electric double layers surrounding the dielectric cylinders is assumed to be small relative to the radius of each cylinder and to the gap width between two neighboring cylinders, but the polarization of the mobile ions in the diffuse layers is allowed. The effect of interactions among individual cylinders is taken into explicit account by employing a unit cell model. The appropriate equations of conservation of electrochemical potential energies of ionic species are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial cylindrical shell of the fluid solution. Analytical expressions for the effective electric conductivity are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. Under an otherwise identical condition, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction is smaller than that of a suspension of spheres. The effect of interactions among the cylinders or spheres on the effective conductivity can be quite significant under appropriate conditions.     

受体生物传感器的研究进展

综述了利用各种生物材料中的膜受体蛋白作为分子识别元件的受体生物传感器研究的最新进展。主要从离体受体传感器、细胞受体传感器和神经组织受体传感器3个方面，讨论了它们的特点和存在的问题，并展望了受体生物传感器未来的发展方向。共引用文献42篇。     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

Hydrogen Gas Sensing of High Electrical Conducting-P2O5-SiO2 Glasses Prepared by Sol-Gel Process

High proton-conducting P₂O₅-SiO₂ glass was applied to the electrolyte of the hydrogen concentration cell for hydrogen gas sensing. 5P₂O₅·95SiO₂ glass was prepared using the sol-gel method and its electrical conductivity and electromotive force were measured at 50°C as a function of both the ambient humidity and hydrogen gas concentration. The electrical conductivities increased with increasing humidity and reached 10^–2 S/cm at 90% relative humidity. The electromotive force of the hydrogen concentration cell, where the glass was used as a membrane, showed good Nernstian response to hydrogen pressure in the high relative humidity region.     

新型氧离子导体La2Mo1.8Ga0.2O9陶瓷的合成及其电性能

通过高温固相合成法首次合成了La₂Mo_1.8Ga_0.2O₉陶瓷样品. 粉末XRD结果表明, 该样品为单一立方相La₂Mo₂O₉结构. 以陶瓷样品为固体电解质、多孔性铂为电极, 采用交流阻抗谱、气体浓差电池、氧泵等方法研究了样品在600～1000 ℃下各种气氛中的离子导电特性. 结果表明, 氧浓差电池电动势的实测值与理论值吻合得很好, 氧离子迁移数为1, 表明该陶瓷样品在该温度下氧气气氛中为一纯氧离子导体; 氧泵(氧的电化学透过)实验结果进一步证实了该样品在氧气气氛中为一纯氧离子导体; 在氧分压p(O₂)＝10^－5～10⁵ Pa的高氧分压气氛中, 电导率与氧分压变化基本无关, 表明在该氧分压范围内样品为纯离子导体, 这与氧浓差电池电动势测定结果相吻合; 在低氧分压为10^－5～10^－15 Pa范围内, 总电导率随氧分压降低而稍有升高, 表明在该氧分压范围样品为氧离子与电子的混合导体; 在600～1000 ℃下氧离子电导率＞10^－2 S•cm^－1, 显著高于母体La₂Mo₂O₉的氧离子电导率, 1000 ℃时的氧离子电导率为0.07 S•cm^－1.     

Synthesis and Crystal Structure of 3,3‘—（Hexane—1,6—diyl）bis（1—acetyl—5,5—dimethylhydantoin）,a New Inducer of Differentiation

The title compound C20H30N4O6, Mr = 422.48)was synthesized and its crystal structure was determined by X-ray diffraction method. It crystallizes in the triclinic system, space group P ī with cell parameters: a = 8.330(2), b = 8.468(2), c = 16.017(3) A, α = 97.30(3), β = 92.33(3), γ = 103.94(3)o, V = 1084.7(4) A3, Dc = 1.294 g/cm3, Z = 2, F(000) = 452 and μ = 0.096 mm-1. The structure was refined to R = 0.0483 for 3732 observed reflections with I>2(I) and wR = 0.1335 for 4828 unique reflections. The hydantoin rings are planar and the two ring planes of one molecule are paralleled to each other.     

Characterization of Pt-Ru/C catalysts by X-ray absorption spectroscopy and temperature-programmed surface reaction

X-ray absorption spectroscopy (XAS) was employed to characterize carbon black supported Pt-Ru catalysts, which are commercially available to be utilized as the anode of polymeric-electrolyte-membrane fuel cells. Both Pt and Ru were found partially oxidized in the as-received form. Upon exposure to hydrogen at room temperature, the catalysts were completely reduced to the metallic state. The bimetallic nanoparticles on the Pt-Ru/C catalysts possess an inner core enriched in Pt, which is surrounded by a Ru-rich outer shell. Such a core–shell structure retained even at an elevated reduction temperature of 623 K. Temperature-programmed surface reaction (TPSR) was carried out to explore the reactivity of adsorbed CO toward hydrogen on various catalysts. Both the peak temperature of the TPSR profile and the amount of methane generated during the course of TPSR were sensitive to the surface composition of Pt–Ru nanoparticles. In combination of XAS and TPSR results, a slight difference in the nanostructure between two Pt-Ru/C catalysts was manifested.     

Complex lanthanide chromate(VI)-phosphates K2R(CrO4)(PO4) (R = Dy-Lu, Y)

The conditions of formation of complex lanthanide chromate(VI)-phosphates K₂R(CrO₄)(PO₄) were found and these compounds were synthesized by solid-state synthesis with variation of the starting compounds, the temperature of synthesis (500–800 °C), and the annealing time (6–200 h). These salts are typical of late lanthanides, R = Dy-Lu, Y. Using lutetium derivatives as examples, it was shown that no similar compounds with lithium or sodium are formed. All the complex chromate(VI)-phosphates obtained decompose under static conditions at temperatures above 550 °C. They are isostructural and crystallize in the monoclinic system. The unit cell parameters for thulium, ytterbium, and lutetium compounds were calculated. It is shown by IR spectroscopy that PO₄ tetrahedra in the crystal lattice of potassium lanthanide chromate(VI)-phosphates are substantially distorted, whereas the CrO₄ tetrahedra retain the regular tetrahedron symmetry (T _d ). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 622–626, April, 2006.