Chemical Solution Deposition of ZnO Thin Films by an Aqueous Solution Gel Precursor Route

An aqueous chemical solution deposition method was used to prepare thin films of ZnO on SiO₂/Si (1 1 1) substrates. Starting from an aqueous solution of Zn acetate, citric acid and ammonia, very thin films could be deposited by spin coating. Heating parameters, necessary for thin film annealing, were determined using FTIR experiments on dried gel precursors, heated up to different temperatures. The morphology and the thickness of the films were investigated by SEM. It is found that homogeneous thin films with grain sizes of about 20 nm are formed. XRD experiments show that there is an indication that the films, crystallized at 500°C, exhibit preferential grain growth along the c-axis.     

Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Nucleation and growth of Cu onto polycrystalline Pt electrode from acidic CuSO4 solution in the presence of H2SeO3

The early stages of Cu electrodeposition onto Pt(poly) have been investigated in 0.5 M H₂SO₄ + 0.01 M CuSO₄ solution without or with H₂SeO₃ when a molar concentration ratio [Cu(II)]/[Se(IV)] ≥ 2×10² using electrochemical and ex situ AFM techniques. The overpotential deposition of Cu has been performed onto a Pt surface precovered independently with Cu in amount close to an equivalent monolayer. Chronoamperometric results have been shown to follow an instantaneous 3D nucleation and diffusion-controlled growth model. The values of diffusion coefficient D for Cu²⁺, number of nuclei N and average nuclei radius r _av have been calculated. In the local regions of the surface, the separate large agglomerates composed of the different diameter clusters have been revealed in both cases, but, in the presence of the H₂SeO₃, they attained a distinct chain-like configuration. Some morphological characteristics have been reported.     

Enthalpy of solution of phenoxyalcohols solubilized in aqueous sodium dodecylsulfate and hexadecyltrimethylammonium bromide solutions

The enthalpy of solution of phenoxy 2-ethanol, 1 phenoxy,-3 propanol and benzylalcohol was determined at 25 °C in aqueous sodium dodecylsulfate and hexadecyltrimethylammonium bromide solution, up to 0.2 mol/kg surfactant concentration. Using the pseudo-phase model, the standard enthalpy of transfer and the partition coefficient of the alcohols between micelle and water are calculated. The latter quantity is found to be systematically larger when derived from enthalpy than from free energy measurements. Using the so-called compensation plot, the solution thermodynamics of aromatic and aliphatic alcohols in aqueous sodium dodecylsulfate and in the octane+water systems are compared. Aromatic alcohols display an anomalous behavior in the octane+ water system but not in the micellar one.The standard enthalpy of solution of various alcohols presents, when plotted against hexadecyltrimethylammonium bromide concentration, a shoulder in the region around 0.05 mol/kg; a discussion is presented on the evidence for alleged micellar structural changes in aqueous micellar systems.     

Kinetics of oxidation of ethyldigol by vanadium(V) in aqueous acidic medium

The kinetics of oxidation of ethyldigol by vanadium(V) in aqueous acidic medium has been carried out. The reaction is first order with respect to vanadium(V) and the substrate and is acid catalysed.Hammett acidity function (H ₀) andBunnett hypothesis have been applied. The formation of free radicals during the course of the reaction has been indicated. A probable reaction mechanism is proposed.

---

Die Kinetik der Oxidation von Ethyldigol mit Vanadium(V) in wäßrigem saurem Medium

Zusammenfassung Es wurde die Kinetik der Oxidation von Ethyldigol mittels Vanadium(V) in wäßriger saurer Lösung untersucht. Die Reaktion ist erster Ordnung bezüglich Vanadium(V) und Substrat und ist säurekatalysiert. Es wurden dieHammett-Aciditätsfunktion (H ₀) und dieBunnett-Hypothese angewandt. Die Bildung von freien Radikalen während der Reaktion konnte bestätigt werden. Es wird ein Reaktionsmechanismus vorgeschlagen.

     

Threonine-FX dosimeter for food irradiation

A detailed study for the spectrophotometric readout method for L-threonine powder, [CH₃CH(OH)CH(NH₂)COOH], was done. In this method, 400 mg unirradiated/irradiated L-threonine powder was dissolved in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.7×10⁻⁴ mol dm⁻³ xylenol orange (XO) in aerated aqueous 0.17 mol dm⁻³ sulphuric acid (FX). The peroxy radicals produced from irradiated threonine oxidize ferrous ions and XO forms a complex with ferric ions as well as controls the chain length of ferrous ion oxidation. The plot of absorbance at 556 nm against dose is linear in the dose range 20–400 Gy and doses down to about 1 Gy can be measured using 10-cm path cells. Response of the dosimeter is independent of irradiation temperature above 20. A dose of 50 Gy–10 kGy can be measured dissolving 50 mg threonine powder in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.3×10⁻⁴ mol dm⁻³ XO in aerated aqueous 0.06 mol dm⁻³ sulphuric acid (FX). The plot of absorbance at 552 nm against dose is non-linear. However dosimeter shows linear dose response up to 1000 Gy. Irradiated threonine powder is stable for about 3 months. The reproducibility of the method is better than ±2%. This dosimeter is very useful as transfer dosimeter for food irradiation programme.     

Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.     

Chemical Bonding and Pressure‐Induced Change of the Electron Configuration of Ytterbium in β‐YbAgGa2

Single‐phase polycrystalline samples of the intermetallic compound β‐YbAgGa₂ were synthesized by inductive heating and subsequent annealing for eight weeks at 670 K. Magnetic properties were characterized by susceptibility measurements and indicated intermediate valence of ytterbium at ambient pressure. Angle‐dispersive X‐ray powder diffraction data of orthorhombic β‐YbAgGa₂ indicate stability of the phase in the investigated pressure range from 0.1 MPa (ambient pressure) to 19 GPa. The pressure‐induced volume decrease is accompanied by an increase of the effective valence from 2.17 at ambient conditions to 2.71 at 16 GPa as evaluated by X‐ray absorption spectroscopy at the Yb L_III threshold. Analysis of the chemical bonding in β‐YbAgGa₂ by integrating the electron density of the polyanion in basins as defined by the electron localization function results in an electron count Yb^2.7+[(Ag^0.2—)(Ga1(3b)^1.0—)(Ga2(4b)^1.5—)]. This finding is close to the expected values calculated by means of the Zintl rules and fits well the results of magnetic susceptibility measurements and XAS investigations.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Nonequilibrium fluctuations in μ space

The properties of fluctuations in space in or outside thermal equilibrium are obtained by solving hierarchies of equations derived either from the Liouville or the Master equation. In particular we study the one-, two-, etc., time correlation functions that describe the spatial and temporal behavior of the fluctuations in space. Explicit solutions are obtained for a dilute gas. The Langevin approach is briefly discussed. Our results are compared with those obtained in the extensive literature, which is reviewed in some detail.