苯乙烯基吡啶类化合物几何结构与光谱的理论研究

采用量子化学密度泛函理论(DFT)方法分别在B3LYP/6-31G*, 6-31G**, 6-31＋G*水平上对苯乙烯基吡啶类化合物进行计算研究. 通过在相同水平下的振动频率分析发现苯乙烯基吡啶类化合物具有C₁对称性, 酯基的碳氧原子与苯环形成不同的离域大π键, 空间位阻和共轭效应使得两苯环处于两个不同平面, 二面角在60°与62°之间. 使用含时密度泛函理论(TD-DFT)方法计算第一激发态的电子垂直跃迁能, 得到最大吸收波长λ_max. 计算结果表明末端烷基链的长度对该类化合物的几何结构与振动光谱、电子光谱无影响.     

铝镁混合金属氢氧化物溶胶阴离子交换性能研究

本文研究了电解质对铝镁混合金属氢氧化物（Ａｌ－ＭｇＭＭＨ）溶胶粒子中Ｃｌ－和ＯＨ－的阴离子交换性能。在所研究的电解质ＮａＮＯ３，ＨＣＯＯＮａ，ＣＨ３ＣＯＯＮａ，Ｎａ２ＣＯ３，Ｎａ２ＳＯ４和Ｎａ３ＰＯ４中，发现高价阴离子的交换能力大于低价阴离子的交换能力，无机阴离子的交换能力大于有机阴离子的交换能力。所研究Ａｌ－ＭｇＭＭＨ溶胶粒子的阴离子交换容量为２．８２ｍｍｏｌ／ｇ，比粘土粒子的阳离子交换容量大得多。     

高密度聚乙烯/全同立构聚丙烯共混物超拉伸纤维的热行为与力学行为

用热拉法制备了高密度聚乙烯(HDPE)/全同立构聚丙烯(iPP)共混物超拉伸纤维,研究了拉伸比对其热行为及力学行为的影响,随拉伸比增加,纤维中HDPE与iPP的结晶度增大,熔融温度升高、熔程变宽;纤维中HDPE与iPP的结晶度低于其纯组分,熔融湿度与熔程基本不受组分比的影响,随拉伸比增加,纤维的模量增高,以HDPE为主的纤维的拉伸强度增大,以iPP为主的纤维拉伸强度增至一定值后,不再随拉伸比增加而增大,并有下降趋势。     

Calculation of Vertical Ionization Potentials of Oxygen Difluoride,Difluoramine, and Difluoromethane by Local Density Approximation

The vertical ionization potentials of OF₂, HNF₂, and CH₂F₂ were computed by the deMon density functional program. The results are compared with earlier calculations and with experiment. The average absolute deviation of the 21 computed ionization potentials of the outer valence electrons from experiment is 0.44 eV, which compares well with 0.37 eV for frozen-orbital configuration-interaction calculations. Although this performance is not as good as perturbation corrections to Koopmans' theorem, the computation requirements are much less demanding.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Mo/Fe3O4(111)表面对燃煤烟气汞吸附的密度泛函研究

利用CASTEP软件包采用密度泛函理论计算研究了过渡金属Mo掺杂Fe_3O_4(111)Fe_(tet)表面对Hg~0、HgCl和HgCl_2的吸附特征,分析了Mo掺杂前后Fe_3O_4(111)Fe_(tet)表面上不同汞物种的吸附形态。结果表明,Mo掺杂Fe_3O_4(111)Fe_(tet)表面对HgCl和HgCl_2为化学吸附,而对Hg~0的吸附为物理吸附;与纯净表面相比,HgCl在Mo原子掺杂表面上的吸附能提高了40%-66%。HgCl_2在纯净Fe_3O_4(111)Fe_(tet)表面形成"M"形结构;而掺杂Mo原子后,由于Cl原子与Mo原子之间更强的相互作用,使得HgCl_2发生了完全解离,两个Cl原子分别与Mo原子和Fe原子成键吸附在表面,Hg脱附。相关研究结果可为脱除燃煤烟气中的汞提供一定的理论指导。     

Extremely Low Vapor-Pressure Data as Access to PC-SAFT Parameter Estimation for Ionic Liquids and Modeling of Precursor Solubility in Ionic Liquids

Precursor solubility is a crucial factor in industrial applications, dominating the outcome of reactions and purification steps. The outcome and success of thermodynamic modelling of this industrially important property with equations of states, such as Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT), vastly depends on the quality of the pure-component parameters. The pure-component parameters for low-volatile compounds such as ionic liquids (ILs) have been commonly estimated using mixture properties, e. g. the osmotic pressure of aqueous solutions. This leads to parameters that depend on the solvent, and transferability to other mixtures often causes poor modeling results. Mixture-independent experimental properties would be a more suitable basis for the parameter estimation offering a way to universal parameter sets. Model parameters for ILs are available in the literature [10.1016/j.fluid.2012.05.029], but they were estimated using pure-IL density data. The present work focuses on a step towards a more universal estimation strategy that includes new experimental vapor-pressure data of the pure IL. ILs exhibit an almost negligible vapor pressure in magnitude of usually 10⁻⁵ Pa even at elevated temperatures. In this work, such vapor-pressure data of a series of 1-ethyl-3-methyl-imidazolium-based [C₂mim]-ILs with various IL-anions (e. g. tetrafluoroborate [BF₄]⁻, hexafluorophosphate [PF₆]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻) were experimentally determined and subsequently used for PC-SAFT parameter estimation. The so-determined parameters were used to predict experimental molecular precursor solubility in ILs and infinitely diluted activity coefficients of various solvents in ILs. The parameters were further compared to modeling results using classical parametrization methods (use of liquid-density data only for the molecular PC-SAFT and the ion-based electrolyte PC-SAFT). As a result, the modeled precursor solubilities using the new approach are much more precise than using the classical parametrization methods, and required binary parameters were found to be much smaller (if needed). In sum, including the pure-component vapor-pressure data of ILs opens the door towards parameter estimation that is not biased by mixture data. This procedure might be suitable also for polymers and for all kind of ionic species but needs extension to ion-specific parametrization in the long term.     

双包覆法改善高压钴酸锂正极材料的电化学性能

通过结合固相和液相包覆在Al掺杂LiCoO₂表面共包覆了钛酸锂(Li₄Ti₅O₁₂)和聚吡咯(PPy)。这种双包覆方法不仅稳定了高电压下LiCoO₂的表面,还增强了材料的离子和电子电导率。电化学测试表明,当活性物质、导电剂和黏结剂的质量比为80∶10∶10时,在0.5C(1C=180 mA·g^-1)电流下,循环300周后的容量保持率为76.9%,且在5C电流密度下可逆比容量为150 mAh·g^-1;由于双包覆后LiCoO₂电子电导率大幅提高,当活性物质、导电剂和黏结剂的质量比为90∶3∶7时,在0.5C电流下,循环200周后的容量保持率为82.8%,且在5C电流密度下可逆比容量为130 mAh·g^-1。X射线光电子能谱测试表明,包覆层可以在循环中保持稳定且能抑制LiCoO₂材料在高电压下的表面副反应。     

质子交换膜燃料电池电流密度分布特性和研究展望

质子交换膜燃料电池具有无污染、噪声低、能量密度高、燃料转换效率高、响应速度快的显著优点,得到了迅速发展,但寿命仍然是制约其大规模商业化的重要原因。局部电流密度作为质子交换膜燃料电池运行过程中的重要参数,既能作为电池运行过程中的故障诊断和定位工具,提升电池运行的稳定性和和耐久性;又能提供电池运行期间其内部现象的有关信息,为深入理解电池反应机理以及优化电池设计提供有力指导,因此研究局部电流密度具有非常重要的意义。本文介绍并分析了实时原位测量局部电流密度的方法,比较了前人实验所得结果与模拟所得结果,阐述了相关参数对局部电流密度分布的影响机制,回顾并评析了局部电流密度用于燃料电池分析中的实际工作。最后,立足于局部电流密度的研究现状,给出了局部电流密度下一步的研究方向。