F／Cl比与Eu~（2＋）：BaFCl中F色心的浓度和光激励截面的关系

研究了Ｅｕ（２＋）：ＢａＦｘＣｌ２在紫外线辐照下的光激励发光。通过改变激励方式及激励光的扫描方向，给出了Ｅｕ（２＋）：ＢａＦｘＣｌ２－ｘ光激励发光过程中，两种Ｆ色心的浓度比值与光激励截面比值的测定方法。利用这种测定方法，进一步研究了两种Ｆ色心的浓度比值和光激励截面比值与Ｆ／ＣＩ比值的关系。     

聚类分析在髁突骨密度分析中的应用

本研究应用聚类分析的方法，对人离休髁突×片进行数字图像技术处理所获得的影像密度数值做了详细分析，取得人髁突不同区的骨密度分布及不同年龄阶段髁突密度变化的情况。该方法避免了人为因素的影响，其结果较客观地反映了髁突的骨质密度；为研究病理状态时髁突骨密度的改变提供参考。     

用多路逆磁系统测量热电子环磁镜中热电子沿轴向的分布

本文介绍了多路逆磁测量方法及利用这一方法在ＨＥＲ装置上测量热电子环沿轴向的长度与晃荡电子密度的轴向分布的实验结果。     

Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Normalization and Fermi–Coulomb and Coulomb hole sum rules for approximate wave functions

For approximate wave functions, we prove the theorem that there is a one‐to‐one correspondence between the constraints of normalization and of the Fermi–Coulomb and Coulomb hole charge sum rules at each electron position. This correspondence is surprising in light of the fact that normalization depends on the probability of finding an electron at some position. In contrast, the Fermi–Coulomb hole sum rule depends on the probability of two electrons staying apart because of correlations due to the Pauli exclusion principle and Coulomb repulsion, while the Coulomb hole sum rule depends on Coulomb repulsion. We demonstrate the theorem for the ground state of the He atom by the use of two different approximate wave functions that are functionals rather than functions. The first of these wave function functionals is constructed to satisfy the constraint of normalization, and the second that of the Coulomb hole sum rule for each electron position. Each is then shown to satisfy the other corresponding sum rule. The significance of the theorem for the construction of approximate “exchange‐correlation” and “correlation” energy functionals of density functional theory is also discussed. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

BELENE nuclear power plant numerical and experimental bedrock,layers and surface signals

An investigation of BELENE Nuclear Power Plant (NPP) free field signal is presented in the current study. An SH wave propagation trough multilayer geological media in the region is considered. An original structural model of the geological column has been developed. The investigated layers are isotropic, with constant depth and skyline parallel. The SH rays are with an arbitrary angle as far as the layers are concerned. The seismic SH waves have been generated by a special detonation device. The main results of the study are graphically illustrated. A comparison between the original BELENE NPP experimental and the numerical surface (free field) signals (obtained by the formulated direct problem) for the investigated geological column has been carried out and its results are hereby shown.     

Estimating Invariant Probability Densities for Dynamical Systems

Knowing a probability density (ideally, an invariant density) for the trajectories of a dynamical system allows many significant estimates to be made, from the well-known dynamical invariants such as Lyapunov exponents and mutual information to conditional probabilities which are potentially more suitable for prediction than the single number produced by most predictors. Densities on typical attractors have properties, such as singularity with respect to Lebesgue measure, which make standard density estimators less useful than one would hope. In this paper we present a new method of estimating densities which can smooth in a way that tends to preserve fractal structure down to some level, and that also maintains invariance. We demonstrate with applications to real and artificial data.     

Establishment of Illuminance Scale at UME with an Accurately Calibrated Radiometer

Traceability in illuminance measurements at the National Metrology Institute of Turkey (TüBITAK-UME) was established in 2003 with a detector-based realization. The new measurement technique was developed for the determination of illuminance responsivity and upgrating of the illuminance scale. The unit of the illuminance responsivity, in A/lx, was measured with an expanded uncertainty of 0.2% (k = 2) by supplying using the developed scanning technique for the calculation of color correction factor. The surface of a radiometer was scanned using a double-monochromator facility upgraded with an x-y scanning system. The illuminance responsivity as a function of bandpass and temperature were also investigated in this study. To use a radiometer in the photometric applications of metrology, a light-sensitive device, a so-called trap detector, was characterized by measuring the absolute responsivity, the non-linearity, and spatial non-uniformity.     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.