Developing a sequential injection-square wave voltammetry (SI-SWV) method for determination of atrazine using a hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of atrazine by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of buffer/standard solution. To obtain an efficient homogenization, the sample solution is divided in five zones intercalated by four zones of the Britton-Robinson buffer (pH 2.0) in presence of appropriate concentration of NaNO₃ and varying atrazine standard concentrations. This mixture zone is isolated from the carrier solution by two 100 μL air bubbles. After homogenization in an auxiliary reaction coil the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.2 V versus Ag/AgCl using a frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for atrazine concentrations between 1.16 × 10⁻⁷ and 2.32 × 10⁻⁶ mol L⁻¹, obeying the linear equation i_p = (−6.91 ± 0.07) × 10⁸[atrazine] + (4 ± 8), with r² = 0.9996, for which the slope is given in nA L mol⁻¹. The detection and quantification limits of the method are 2.1 × 10⁻⁸ and 7.0 × 10⁻⁸ mol L⁻¹, respectively. The sampling frequency is 37 h⁻¹, when the standard addition protocol is followed. This frequency can be increased to 42 h⁻¹ if the protocol to obtain in-line calibration curve is used for quantification. The method was applied for determination of atrazine in spiked river water samples and its accuracy was evaluated by comparison with the batch standard addition approach, which revealed that there is no evidence of statistically significant differences between the two methods.     

Die Berechnung von Einelektronen-Integralen in der SCF-Xα-SW-Methode: I. Die Normierung

A normalization of the wave functions by means of the theoretical exact Multiple-Scattering-(MS)-formalism is discussed within the framework of the SCF-X-SW-method. For the atomic and extramolecular regions the integrals of normalization can be easily determined and the results can be described by the corresponding electronic charges. The calculation of the integral of the interatomic region is problematic. The needful volume integration is only necessary to theGreen's functions of the wave functions and can be solved by means of the residual theory. The further analytical calculation of the surface integrals leads to a complicated formalism which can be numerically evaluated.

     

Calculation of Spectroscopic Constants for the Ground Electronic States of KRb and RbCs Molecules

The vibrational, rotational, and centrifugal constants have been calculated for the ground electronic states of KRb and RbCs molecules. The calculation is performed using the semiempirical potential curves constructed in a wide range of internuclear distances. The estimated spectroscopic constants are compared with experimental data.     

一种新型的表面声波阻抗传感器及其在液相体系中的应用

一种新型的表面声波阻抗传感器及其在液相体系中的应用姚守拙，陈康，刘德忠，聂利华（湖南大学化学化工系，长沙，４１００８２）关键词表面声波，阻抗传感器，液相应用表面声波传感器（ＳＡＷＳ）具有较高的灵敏度和检测精度，已广泛应用于气体微量组分分析、色谱检测和...     

钴(Ⅱ)与5-(5-硝基-2-吡啶偶氮)-2,4-二氨基甲苯络合物吸附波及其应用

钴 (Ⅱ )在NH3·H2O -NH2OH·HCl-5_(5_硝基_2_吡啶偶氮)_2,4_二氨基甲苯体系中有一灵敏的极谱波 ,其峰电位Vp 为 -1.20V(vsSCE) ,钴质量浓度在0.25～25μg/L范围内与峰电流Ip′有良好的线性关系 ,检出限为0.12μg/L;经多种电化学方法证明该波为络合物吸附波 ,其电极过程为不可逆过程 ,电子转移数为2 ,此外还试验了多种离子对峰电流Ip′的影响;所拟方法已用于维生素B12 和模拟样中痕量钴的测定     

铟(Ⅲ)-芦丁极谱络合吸附波的研究

在pH6.0的乙酸盐缓冲底液中,用单扫极谱法可获得高灵敏度的铟(Ⅲ)-芦丁的络合吸附波,其检测下限达3.0×10~(-10)mol/L。成功地用于纯金属锌中10~(-5)％铟的测定。测得吸附电活性络合物的组成为:In(Ⅲ):芦丁=1∶2,条件稳定常数为1.8×10~(10)。电极反应是吸附络合物中的In(Ⅲ)还原为In(Hg)。测得电极反应的转移系数α=0.51,表面电化学反应的标准速率常数k_s=0.43/s     

Dielectric properties of beryllia ceramics in the near-millimeter wavelength range

We report the refractive indices and absorption coefficients for four beryllia (BeO) ceramic samples. These dielectric properties have been measured over the range from 4 to 18 cm^–1 by use of a Michelson interferometer. The index n, follows the linear relationship n=0.6517 cm³/g×+0.7130 with density, , over the range 2.8<<3.0 g/cm³.     

A study of bismuth-film electrodes for the detection of trace metals by anodic stripping voltammetry and their application to the determination of Pb and Zn in tapwater and human hair

This work reports the simultaneous determination of Cd(II), Pb(II) and Zn(II) at the low μg l⁻¹ concentration levels by square wave anodic stripping voltammetry (SWASV) on a bismuth-film electrode (BFE) plated in situ. The metal ions and bismuth were simultaneously deposited by reduction at −1.4 V on a rotating glassy carbon disk electrode. Then, the preconcentrated metals were oxidised by scanning the potential of the electrode from −1.4 to 0 V using a square-wave waveform. The stripping current arising from the oxidation of each metal was related to the concentration of each metal in the sample. The parameters for the simultaneous determination of the three metals were investigated with the view to apply this type of voltammetric sensor to real samples containing low concentrations of metals. Using the selected conditions, the limits of detection were 0.2 μg l⁻¹ for Cd and for Pb and 0.7 μg l⁻¹ for Zn at a preconcentration time of 10 min. Finally, BFE's were successfully applied to the determination of Pb and Zn in tapwater and human hair and the results were in satisfactory statistical agreement with atomic absorption spectroscopy (AAS).     

A theoretical study of the lowest electronic states of azobenzene: the role of torsion coordinate in the cis–trans photoisomerization

In the present paper we report the results of a multiconfigurational computational study on potential-energy curves of azobenzene along the NN twisting to clarify the role of this coordinate in the decay of the S₂(*) and S₁(n*) states. We have found that there is a singlet state, S₃ at the trans geometry, on the basis of the doubly excited configuration n²*², that has a deep minimum at about 90° of twisting, where it is the lowest excited singlet state. The existence of this state provides an explanation for the short lifetime of S₂(*) and for the wavelength-dependence of azobenzene photochemistry. We have characterized the S₁(n*) state by calculating its vibrational frequencies, which are found to correspond to the recently observed transient Raman spectrum. We have also computed the potential-energy curve for the triplet T₁(n*) at the density functional theory B3LYP level, which indicates that in this state the isomerization occurs along the twisting coordinate.Acknowledgement The financial support from MIUR (project Modellistica delle proprietà spettroscopiche di sistemi molecolari complessi funds ex 60% and project Dinamiche molecolari in sistemi di interesse chimico funds ex 40%), from the University of Bologna (Funds for Selected Research Topics) is gratefully acknowledged.Contribution to the Jacopo Tomasi Honorary Issue     

Two-electron atomic wave functions which satisfy proportionality relations between one-and two-electron moments

Based on momentum- and position-space analyses of the moment operators for two-electron atoms, it is shown that there exists a family of two-electron wave functions which satisfy a proportionality relation, r/ ₁ ^v /r ₁₂ ^v =p/ ₁ ^v /p ₁₂ ^v =2^–v/2, between the one and two-electron moments in position and momentum spaces, where v is an arbitrary number for which the moments are well-defined.