Fabrication and application of a new modified electrochemical sensor using nano-silica and a newly synthesized Schiff base for simultaneous determination of Cd,Cu and Hg ions in water and some foodstuff samples

A new chemically modified carbon paste electrode was constructed and used for rapid, simple, accurate, selective and highly sensitive simultaneous determination of cadmium, copper and mercury using square wave anodic stripping voltammetry (SWASV). The carbon paste electrode was modified by N,N′-bis(3-(2-thenylidenimino)propyl)piperazine coated silica nanoparticles. Compared with carbon paste electrode, the stripping peak currents had a significant increase at the modified electrode. Under the optimized conditions (deposition potential, −1.100 V vs. Ag/AgCl; deposition time, 60 s; resting time, 10 s; SW frequency, 25 Hz; pulse amplitude, 0.15 V; dc voltage step height, 4.4 mV), the detection limit was 0.3, 0.1 and 0.05 ng mL⁻¹ for the determination of Cd²⁺, Cu²⁺ and Hg²⁺, respectively. The complexation reaction of the ligand with several metal cations in methanol was studied and the stability constants of the complexes were obtained. The effects of different cations and anions on the simultaneous determination of metal ions were studied and it was found that the electrode is highly selective for the simultaneous determination of Cd²⁺, Cu²⁺ and Hg²⁺. Furthermore, the present method was applied to the determination of Cd²⁺, Cu²⁺ and Hg²⁺ in water and some foodstuff samples.     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Voltammetric Determination of Boric Acid Using the Ternary Complexation System with Salicylaldehyde and H‐Acid

A square‐wave voltammetric method for the determination of boric acid in water has been described based on the new understanding of the electrochemical behavior of boric acid‐Azomethine H complexation. Salicylaldehyde and H‐acid were used as the starting materials of boric acid‐Azomethine H complex and their concentrations were optimized for boric acid determination in water. A glassy carbon electrode, instead of a conventional mercury electrode, was used in the measurement. The detection limit of the proposed method was 0.10 mg B dm^?3. The proposed method was successfully used for boric acid determination in the water from a seawater desalination RO plant.     

Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Determination of 1-hydroxypyrene in human urine by a multi-wall carbon nanotubes-modified glassy carbon electrode

A multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (MWNT-GCE) was used to study the electrochemical behaviour of1-hydroxypyrene (1-OHP) and applied to its determination. The results showed that the modified electrode had a strong adsorptive ability to 1-OHP and enhances its electrochemical signal. By square wave voltammetry, the linear relationship of 1-OHP was 6?×?10^?9???8?×?10^?7?mol?L^?1 with a linear correlation coefficient of 0.996, and the detection limit was 1?×?10^?10?mol?L^?1. Compared with other published methods, this newly proposed method possesses many advantages such as very low detection limit, fast response, low cost and simplicity. And this method was applied successfully in the determination of 1‐OHP in real human urine samples.     

Electrochemical Behaviour and Square Wave Voltammetry of the Rice Herbicides Molinate,Bensulfuron-Methyl,Mefenacet and Thiobencarb

Abstract

Cyclic, differential pulse and square wave voltammetry were applied to develop an electroanalytical procedure for the determination of a group of herbicides used to treat rice crops: molinate, bensul-ruron-methyl, mefenacet and thiobencarb. The oxidation mechanism causes adsorption problems and consequent poisoning of the electrode surface by the products of the electrochemical reaction. Parameters such as pH, frequency and electrochemical electrode surface treatment were optimized. The analytical methodology developed using square wave voltammetry was applied to the determination of molinate and bensulfuron-methyl in simple or mixed commercial products.     

线性扫描极谱法测定微量肉桂酸

在 1mol·L-1HOAc NaOAc介质中 (pH =3.6 ) ,肉桂酸有一还原峰 ,其峰电位为 - 1.4 7V(vs.SCE)。峰电流与肉桂酸浓度在 2 .0× 10 -5～ 8.0× 10 -4 mol·L-1之间呈线性关系 (r =0 .9989) ,检出限为 1.0× 10 -5mol·L-1。该法应用于肉桂酸含量的测定 ,结果满意 ,并对肉桂酸的电化学性质进行了研究     

Reverse scans in square wave voltammetry

Reverse scans in square wave voltammetry (SWV) leading to the regeneration of the substance initially present in solution are studied. Widths and peak potentials of waves in SWV performed with both negative and positive potential scans allow us to determine easily the kinetic parameters of a slow electrochemical reaction. The theoretical treatment is verified using the U(V)–U(VI) system in a carbonate medium, which has already been studied by Krulic, Fatouros and Chevalet [J. Electronal. Chem. 251 (1988) 151].     

镓-铬蓝黑R络合吸附波的研究及应用

在0.012mol/L HAc-0.10mol/L NaAc缓冲溶液中pH5.60,铬蓝黑R于-0.34V(vs.SCE)处有一极谱波P_1,加入Ga(Ⅲ),在-0.55V(vs.SCE)处产生一灵敏的极谱波P_2。i_p_2与Ga(Ⅲ)浓度在0.20～15.0μg/25ml范围内呈线性关系。试验表明,该极谱波属络合吸附波。本法用于测定铝箔、铅锌矿中微量镓,结果满意。     

铑（Ⅲ）与2—（3,5—二氯—2—吡啶偶氮）—5—二甲氨基苯胺络合物的催化氢波

本文提出一种新的测定铑的催化氢波体系.先使Rh(Ⅲ)与3,5-diCl-PADMA在HAc-NaAc缓冲溶液中生成稳定的络合物,再以适量HclO_4将溶液酸化后进行极谱测定。利用正交试验法确定体系的最佳分析条件为:0.05 mol/L pH5.0的HAc-NaAc,1.6×10~(-5)mol/L3,5-diCl-PADMA,沸水浴加热15min.,4.4 mol/L HCIO4酸化。在此条件下的线性范围为1.9×10~(-11)～3.9×10~(-9)mol/L,检出限达5.8×10~(-12)mol/L。大量Cu(Ⅱ)、Ni(Ⅱ)、Fe(Ⅲ)及Co(Ⅱ)对体系的干扰可用EDTA消除。研究了催化波的性质,表明该波为Rh(Ⅲ)与3,5-diClPADMA络合物的催化氢波。