MSE-MRI sequence optimisation for measurement of bi- and tri-exponential T2 relaxation in a phantom and fruit

The transverse relaxation signal from vegetal cells can be described by multi-exponential behaviour, reflecting different water compartments. This multi-exponential relaxation is rarely measured by conventional MRI imaging protocols; mono-exponential relaxation times are measured instead, thus limiting information about of the microstructure and water status in vegetal cells. In this study, an optimised multiple spin echo (MSE) MRI sequence was evaluated for assessment of multi-exponential transverse relaxation in fruit tissues. The sequence was designed for the acquisition of a maximum of 512 echoes. Non-selective refocusing RF pulses were used in combination with balanced crusher gradients for elimination of spurious echoes. The study was performed on a bi-compartmental phantom with known T₂ values and on apple and tomato fruit. T₂ decays measured in the phantom and fruit were analysed using bi- and tri-exponential fits, respectively. The MRI results were compared with low field non-spatially resolved NMR measurements performed on the same samples.     

A METHOD TO ESTIMATE THE AVERAGE TEMPERATURE ON THE CUTTING EDGE OF TOOLS: APPLICATION ON THE MILLING PROCESS

In this work we present an experimental technique for the estimation of the average temperature on the cutting edge of each insert in a milling tool. The experimental device used thermistors, one per insert, and a rotational collector in order to ensure the transmission of the signals between the rotating tool and the acquisition device. Each thermistor is located at a point in the tool close to the tip of each insert. The average temperature on the cutting edge of each insert is estimated from the temperature at the nearest sensor and a model expressing these two temperatures. This model is achieved from the noninteger system identification method.     

Analyzing Transverse Momentum Spectra of Pions,Kaons and Protons in p–p,p–A and A–A Collisions via the Blast-Wave Model with Fluctuations

The transverse momentum spectra of different types of particles, π±, K±, p and p¯, produced at mid-(pseudo)rapidity in different centrality lead–lead (Pb–Pb) collisions at 2.76 TeV; proton–lead (p–Pb) collisions at 5.02 TeV; xenon–xenon (Xe–Xe) collisions at 5.44 TeV; and proton–proton (p–p) collisions at 0.9, 2.76, 5.02, 7 and 13 TeV, were analyzed by the blast-wave model with fluctuations. With the experimental data measured by the ALICE and CMS Collaborations at the Large Hadron Collider (LHC), the kinetic freeze-out temperature, transverse flow velocity and proper time were extracted from fitting the transverse momentum spectra. In nucleus–nucleus (A–A) and proton–nucleus (p–A) collisions, the three parameters decrease with the decrease of event centrality from central to peripheral, indicating higher degrees of excitation, quicker expansion velocities and longer evolution times for central collisions. In p–p collisions, the kinetic freeze-out temperature is nearly invariant with the increase of energy, though the transverse flow velocity and proper time increase slightly, in the considered energy range.     

Ultrafast transverse thermoelectric response in c‐axis inclined epitaxial La0.5Sr0.5CoO3 thin films

Ultrafast transverse thermoelectric voltage response has been observed in c‐axis inclined epitaxial La_0.5Sr_0.5CoO₃thin films. Voltage signals with the rise time of 7 ns have been detected under the irradiation of pulse laser with duration of 28 ns. A concept, named response rate ratio, has been proposed to evaluate the intrinsic response rate, and this ratio in La_0.5Sr_0.5CoO₃is smaller than that in other reported materials. The low resistivity is thought to be responsible for the ultrafast response, as low resistivity induces small optical penetration depth, and response time has a monotonous increasing relationship with this depth.

     

Effects of distributed birefringence on fiber Bragg grating under non-uniform transverse load

Many theoretical and experimental studies have been developed to characterize the spectral response of an optical fiber Bragg grating (FBG) in axial strain fields in recent years. However, comparatively few works were devoted to the evolution of the spectrum when a FBG is subjected to non-uniform transverse load. In this paper, the effects of distributed birefringence on FBG under non-uniform transverse load are analyzed and a numerical simulation based on the piecewise-uniform approach is also discussed to simulate the responses of FBG under some typical non-uniform transverse strain fields. Experiment was carried out using different loads applied at different locations of the FBG. Good agreements between experimental results and numerical simulations have been obtained.     

HLS横向反馈系统研制中的关键技术

较为全面地介绍了合肥光源横向模拟反馈系统研制过程中, 所涉及的部分关键问题, 如矢量运算模块的开发, Notch滤波器研制, 基于Hilbert变换进行相空间重建、模式分析, 反馈Kicker腔的研制.     

均匀光纤Bragg光栅局部横向受力特性研究

对均匀光纤Bragg光栅(FBG)局部横向受力特性进行了理论和实验研究.采用传输矩阵法分析了FBG其中一段横向受力时的反射光谱变化,并且建立了相应的数学模型.研究表明,当FBG局部横向受力时,受压长度对反射光谱无影响,反射光谱分裂点的波长与横向作用力呈线性正比关系并具有周期性,分裂点反射率与受力位置的关系为近似双曲正切关系. 关键词： 光纤Bragg光栅 传输矩阵法 局部横向受力 分裂点     

Monitoring dendrimer conformational transition using 19F and 1H2O NMR

The conformational transition of a fluorinated amphiphilic dendrimer is monitored by the ¹H signal from water, alongside the ¹⁹F signal from the dendrimer. High-field NMR data (chemical shift δ, self-diffusion coefficient D, longitudinal relaxation rate R₁, and transverse relaxation rate R₂) for both dendrimer (¹⁹F) and water (¹H) match each other in detecting the conformational transition. Among all parameters for both nuclei, the water proton transverse-relaxation rate R₂(¹H₂O) displays the highest relative scale of change upon conformational transition of the dendrimer. Hydrogen/deuterium-exchange mass spectrometry reveals that the compact form of the dendrimer has slower proton exchange with water than the extended form. This result suggests that the sensitivity of R₂(¹H₂O) toward dendrimer conformation originates, at least partially, from the difference in proton exchange efficiency between different dendrimer conformations. Finally, we also demonstrated that this conformational transition could be conveniently monitored using a low-field benchtop NMR spectrometer via R₂(¹H₂O). The ¹H₂O signal thus offers a simple way to monitor structural changes of macromolecules using benchtop time-domain NMR.     

Investigation of unstable motion characteristics of vacuum arc cathode spots between transverse magnetic field contacts

With the improvement of the current level of power grids, the requirements of the opening level of the vacuum switches are also increasing. Vacuum arc cathode spots provide steam and electrons and, to a certain extent, determine the opening capacity of the vacuum switch. In this paper, a vacuum arc cathode spot research platform based on the de-mountable vacuum chamber is constructed. The characteristics of the vacuum arc cathode spots under the transverse magnetic field (TMF) contacts are assessed by a high-speed charge coupled device. The experimental results show that the cathode spot diffusion process can be divided into three processes through cathode spot distribution, arc voltage and current: initial diffusion stage of cathode spots, unstable motion stage of cathode spots, and extinguishing stage. The motion mode of cathode spots during unstable motion stage can be divided into cathode spots group stagnation (CSGS) to multi-cathode jet (MCJ) switch mode, cathode spots group motion (CSGM) to MCJ switch mode, CSGM mode, and MCJ mode. The effects of peak current and contact diameter on unstable motion mode were analysed.     

注入电流引起质子轰击VCSEL中的模式竞争

为了分析质子轰击垂直腔面发射激光器(VCSEL)中注入电流引起的激光模式竞争过程,在三维空间中对VCSEL激射后光电热进行了研究。给出仿真光电热的方程之后,在室温连续工作条件下,对电流孔半径r为4μm、阈值电流Ith为4.5 m A的VCSEL进行自洽求解。当注入电流Iin分别为5.0,5.5,6.0 m A时,得到了对应的外加电压和输出光功率,并绘制了VCSEL的电势、注入电流、载流子、光场和热场的空间分布,给出了连续工作下输出光功率随注入电流变化的曲线。仿真结果表明:随着注入VCSEL中的电流增加,电流密度增大,激光的横向基模和横向一阶模式同时增强。横向一阶模式增加的强度及扩展的范围大于横向基模,激光输出能量逐渐向横向一阶模式过渡,横向模式竞争的同时产生载流子空间烧孔,因此在电流孔半径r≥4μm的VCSEL中,连续工作激光模式不稳定。