Transferkoeffizienten im System Boden—Pflanze in verschiedenen Lokalitäten der Tschechoslovakei

Für die Ermittlung der Transferkoeffizienten im System Boden–Pflanze wurden in drei Stellen der Tschechoslovakei Boden- und Pflanzenproben entnommen. Die niedrigsten Transferkoeffizienten für Getreide und für mehrjährige Futterpflanzen wurden in der Ostslovakei festgestellt. Die Werte der Transferkoeffizienten waren durch den Bodentyp, den Gesamt-Sorptionskapazität und dem Grad der Sorptionssättigung beeinfluβt.

Soil and plant samples were sampled for the determination of soil to plant transfer coefficients in three various Czechoslovak sites. The lowesl transfer factors for cereals and fodder were determined in the site of Eastern Slovakia. Values of transfer factors depend on soil type, cation exchange capacity and base saturation of soils.     

Swelling of metallic surfaces irradiated by helium ions

At doses close to threshold for exfoliation or bubble formation the surfaces have been investigated by SEM and, after isolation of surface layers, also by RBS. Swelling as a function of energy and material has been determined. The data are interpreted in the form of volume occupied by a helium atom. We find an indication for a volume decrease with increasing energy. A special example of blister formation is also discussed, where we find evidence for a non-uniform fracture plane.     

Influence of the Coulomb forces on the thermodynamic and transport properties of non stoichiometric cerium dioxide

Abstract

In this study, it is demonstrated that the Coulomb interactions explains the essential of experimental thermodynamic and transport thermodynamic results.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Analysis of Malathion and its Breakdown Products in Aquaria Containing Golden Shiners (N. CHRYSOLEUCAS)

Abstract

The 1-ethylmonocarboxylic acid of Malathion (MCA) was identified as a metabolite of Malathion in the gut of golden shiners (N. Chrysoleucas) (7.11 × 10²±0.66 × 10² ng/g tissue). As noted in the literature the rate of hydrolysis of Malathion above pH 7 is first order with respect to Malathion and pH dependent. In addition, the rate of hydrolysis of Malathion in aquaria housing these fish was found to be dependent on the concentration of Ca⁺²; sparging the aquaria with air affected the rate. Some of the hydrolysis products of Malathion were identified by gc/ms and found to be pH dependent above pH 7. The half-life of Malathion under different conditions, the identification of some hydrolytic products and a general scheme for the analysis of Malathion, along with some of its metabolic and hydrolytic products are included in this paper.     

Atom dynamical dissipation in the laser cavity with quasimode

In this paper we study the atom dissipation effect in a laser cavity. The cavity field mode is described by the Fox- Li quasimode due to the leakiness of the cavity. Our results show that the atom decay rate versus the decay rate of the quasimode is a Lorentz type. Effects of the atom-cavity detuning as well as cavity size are also discussed.     

多个侧向链对横向量子线传输性质的调制

利用递推格林函数方法，研究了与多个量子点间无相互作用的量子链相耦合的横向量子线的电子输运特性，发现量子链上格点的个数N_U与侧向无限或有限量子链个数N对横向量子线输运性质的不同调制规律.由计算可知，利用格林函数可以方便的对传输构型及传输链中的格点数进行调解，从而得到各种人为量子器件的输运性质. 关键词： 递推格林函数 无限链 有限链 电子输运     

基于1–10GHz空地链路信号的雨强监测方法可行性研究

空地链路上的微波信号受降雨影响, 会产生功率衰减和去极化效应. 基于这些物理特性, 本文提出利用1–10 GHz空地链路信号的降雨干扰项获取雨强的方法, 并开展了相关理论研究. 根据空地链路信号与雨滴复杂的相互作用, 研究了空地链路信号频率为1–10 GHz时, 雨强 (rain rate, R) 对衰减 (attenuation, A) 和交叉极化分辨率 (cross-polarization discrimination, XPD)的影响, 分别建立了A-R和XPD-R关系模型. 通过数值模拟, 分别分析了利用上述两个关系模型估测雨强的可行性, 并系统研究了不同频率、极化方式和仰角条件下的适用性. 研究结果表明, 对于水平极化或圆极化, 且频率较高的空地链路信号, 利用A-R关系反演强降雨具有理论上的可行性; 对于不同频率和极化方式的信号, XPD-R关系模型都可以用于反演雨强, 并且对于1–50 mm·h^-1范围内的雨强, XPD较为敏感; 不同仰角条件下, A-R和XPD-R 模型都适用. 在4–10 GHz时, 本文的XPD-R模型和国际电信联盟ITU-R中XPD预测模型的结果非常接近. 所得出的结论对于下一步开展相关的验证实验, 拓展卫星系统的气象应用, 实时估测降雨强度, 实现全球降雨观测具有重要的参考价值. 关键词： 空地链路信号 雨强 衰减特性 交叉极化分辨率(XPD)     

电荷耦合器件的γ辐照剂量率效应研究

对电荷耦合器件进行了不同剂量率的γ辐照实验,通过多种参数的测试探讨了剂量率与电荷耦合器件性能退化的关系,并对损伤的物理机理进行分析。辐照和退火结果表明:暗信号和暗信号非均匀性是γ辐照的敏感参数,电荷转移效率和饱和输出电压随剂量累积有缓慢下降的趋势;暗场像素灰度值整体抬升,像元之间的差异显著增加;电荷耦合器件的暗信号增量与剂量率呈负相关性,器件存在潜在的低剂量率损伤增强效应。分析认为,剂量率效应是由界面态和氧化物陷阱电荷竞争导致的。通过电子-空穴对复合模型、质子输运模型和界面态形成对机理进行了解释。     

能量范围从20keV到34keV的锆元素K壳层电离截面

 用20~34keV能量的电子束轰击锆靶,从而测得锆元素的K壳层电离截面。这些数据是国际上首次报道。在实验中采用电子输运双群模型修正了由厚衬底产生的反射电子对计数的影响。同时用蒙特卡罗EGS4程序计算了电子在质量厚度为24.3mg/cm²的锆靶中的平均路径长度。