Molecularly imprinted polymer-carbon paste electrode (MIP-CPE)-based sensors for the sensitive detection of organic and inorganic environmental pollutants: A review

The rapidly growing existence of a number of contaminants (i.e. heavy metals, dye compounds, explosives and pesticides etc.) in environment is an alarming concern not only due to their harmful impacts for the environment bur also due to their potential high risk for human health. Thus, the careful and sensitive detection of these environmental contaminants is ver crucial. Electrochemical sensors combined with molecularly imprinted polymers (MIPs) become an attractive area for environmental monitoring. Benefiting from their great features such as high chemical and physical stability, cheap preparation process, excellent selectivity, sensitivity and fast response towards the target compound/s.This review paper aims to present and highlight the latest progresses in the design and development of novel electrochemical sensor systems composed of MIPs and carbon paste electrodes (CPEs) for the sensitive detection of pollutants in environmental samples.     

Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl₃ and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T₅ values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA T_g values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).     

Bimetallic CuCo Derived from Prussian Blue Analogue for Nonenzymatic Glucose Sensing

Bimetallic CuCo composites are prepared by calcinating copper hexacyanocobaltate precursor in N₂ atmosphere. The CuCo modified electrodes are fabricated for nonenzymatic glucose sensing in the alkaline electrolyte. The glucose can be directly electro-oxidized on the surface of the electrode catalyst mediated by the redox couples of Cu and Co. The optimal glucose sensor exhibits a high sensitivity (567 μA ⋅ mM⁻¹ ⋅ cm⁻²) in the range up to 825 μM with a detection limit of 3 μM and acceptable selectivity. The sensor can also be applied in serum samples. This work provides a facile and easily-scalable synthesis method of electrocatalysts for nonenzymatic glucose sensors.     

A Novel Carbon Nitride Nanosheets-based Electrochemical Sensor for Determination of Hydroxychloroquine in Pharmaceutical Formulation and Synthetic Urine Samples

This study introduces modified carbon paste electrodes with carbon nitride nanosheets (CNNS) and outlines their application for the determination of hydroxychloroquine sulfate (HCQ) in tablets and synthetic urine samples. CNNS were synthesized by hydrothermal route (200 °C, 10 h) using melamine and citric acid as their precursors. The carbon nitride nanosheets-based electrode (CNNS/E) presented a linear dynamic range for HCQ (LDR), ranging from 10.0 nmol l⁻¹ to 6.92 μmol l⁻¹, and detection (LOD) and quantification limits (LOQ) of 0.16 nmol l⁻¹ and 0.52 nmol l⁻¹, respectively. LOD and LOQ were calculated by the equations: LOD=3(S_d/b), and LOQ=10(S_d/b). The modified sensor presented excellent relative standard deviations for parameters such as repeatability (2.39 % and 1.87 %) and reproducibility (3.22 % and 2.32 %) in HCQ oxidation peaks (1 and 2). The CNNS/E has not shown significant variations in its anodic signal intensity in the presence of some organic and inorganic substances. It is worth bearing in mind that CNNS/E can be easily manufactured and the sensor has the lowest HCQ detection limits reported so far. The proposed sensor was successfully applied for HCQ determination in tablets and synthetic urine, showing good recovery values and an error of 0.60 % about comparative method in tablet samples, assuring the quality of the method.     

Analytical Modelling of Electron-coupled Ion Transfers with Immobilized vs Soluble Redox Transducer at Thick Film-modified Electrodes

Analytical theoretical solutions are deduced for the current-potential response, concentration profiles and interfacial potentials of electron-coupled ion transfers in the cyclic voltammetry with thick film-modified electrodes. The theory covers a wide variety of possible situations, namely, the redox transducer can be either immobilized on the working electrode or freely diffusing in the organic film, and the ion transfer can be either simple or complicated by homogeneous chemical processes. A comparative and comprehensive study of each case is performed, establishing the key parameters that define the behaviour of the system, as well as guidelines to analyse its electrochemical signal.     

Highly flexible,transparent, conductive and antibacterial films made of spin-coated silver nanowires and a protective ZnO layer

We prepared highly flexible, transparent, conductive and antibacterial film by spin coating a silver nanowire suspension on a poly (ethylene terephthalate) (PET) substrate. The ZnO layer covered the conductive silver nanowire (AgNW) network to protect the metal nanowires from oxidization and enhance both wire-to-wire adhesion and wire-to-substrate adhesion. It is found that the number of AgNW coatings correlates with both the sheet resistance (R_s) and the transmittance of the AgNW/ZnO composite films. An excellent 92% optical transmittance in the visible range and a surface sheet resistance of only 9 Ω sq⁻¹ has been achieved, respectively. Even after bending 1000 times (5 mm bending radius), we found no significant change in the sheet resistance or optical transmittance. The real-time sheet resistance measured as a function of bending radius also remains stable even at the smallest measured bending radius (1 mm). The AgNW/ZnO composite films also show antibacterial effects which could be useful for the fabrication of wearable electronic devices.     

Numerical study for the electrified instability of viscoelastic cylindrical dielectric fluid film surrounded by a conducting gas

The linear electrohydrodynamic cylindrical instability of annular Walters B^′${\mathrm{B}}^{\prime }$ viscoelastic dielectric fluid layer surrounded by a conducting gas in the presence of radial electric field is investigated. The obtained dispersion relation is found to be complicated and cannot be treated theoretically easily. Two limiting cases of interest are investigated, when the inertia is dominant, and when both the kinematic viscosity and viscoelasticity are high, and the corresponding new stability conditions are obtained for both cases. We solve the eigenvalue problem numerically using the continuation method which gives better results than the classical non-linear solvers such as Newton and Secant methods. It is found that the applied radial electric field has a dual role on the stability of the considered system, depending of the chosen wavenumbers range. Both the kinematic viscoelasticity and liquid depth are found to have stabilizing effects, while both the kinematic viscosity and surface tension have destabilizing effects on the considered system. The stability or instability breaks down for critical wavenumber values at which the growth rate vanishes. The behaviors of both the maximum growth rate and the corresponding dominant wavenumber are discussed in detail corresponding to the effect of all physical parameters. Finally a comparison between the results obtained here for Walters B^′${\mathrm{B}}^{\prime }$ viscoelastic fluids, and those obtained here too if the fluid is replaced by a Rivlin–Ericksen viscoelastic one is achieved. The limiting cases of absence of electric field and/or kinematic viscoelasticity are also investigated in detail.     

Probing the Local Reaction Environment During High Turnover Carbon Dioxide Reduction with Ag-Based Gas Diffusion Electrodes

Discerning the influence of electrochemical reactions on the electrode microenvironment is an unavoidable topic for electrochemical reactions that involve the production of OH⁻ and the consumption of water. That is particularly true for the carbon dioxide reduction reaction (CO₂RR), which together with the competing hydrogen evolution reaction (HER) exert changes in the local OH⁻ and H₂O activity that in turn can possibly affect activity, stability, and selectivity of the CO₂RR. We determine the local OH⁻ and H₂O activity in close proximity to a CO₂-converting Ag-based gas diffusion electrode (GDE) with product analysis using gas chromatography. A Pt nanosensor is positioned in the vicinity of the working GDE using shear-force-based scanning electrochemical microscopy (SECM) approach curves, which allows monitoring changes invoked by reactions proceeding within an otherwise inaccessible porous GDE by potentiodynamic measurements at the Pt-tip nanosensor. We show that high turnover HER/CO₂RR at a GDE lead to modulations of the alkalinity of the local electrolyte, that resemble a 16 m KOH solution, variations that are in turn linked to the reaction selectivity.     

Nd:YAG陶瓷与单晶4F3/2–4I13/2跃迁的弱谱线多波长激光性能对比

报道了基于半导体激光端面抽运Nd:YAG的⁴F_3/2–⁴I_13/2 跃迁的弱谱线多波长激光输出. 实验对比了透明陶瓷与单晶材料的激光输出特性, 表明透明陶瓷和单晶材料荧光谱强度的略微差异, 导致了多波长输出时相同两个波长之间的激光强度比在两种材料中的差异. 基于两种耦合输出镜片, 激光阈值都在2 W左右. 在13.5 W的抽运功率下, 基于Nd:YAG透明陶瓷获得了输出功率4.05 W、强度比1 :2的1338与1356 nm双波长激光和输出功率3.65 W、强度比13 : 1的1356与1414 nm 双波长激光, 斜率效率分别达33.9% 和31.9%.     

A posterior error estimates for the nonlinear grating problem with transparent boundary condition

The nonlinear grating problem is modeled by Maxwell's equations with transparent boundary conditions. The nonlocal boundary operators are truncated by taking sufficiently many terms in the corresponding expansions. A finite element method with the truncation operators is developed for solving the nonlinear grating problem. The two posterior error estimates are established. The a posterior error estimate consists of two parts: finite element discretization error and the truncation error of the nonlocal boundary operators. In particular, the truncation error caused by truncation operations is exponentially decayed when the parameter N is increased. Numerical experiment is included to illustrate the efficiency of the method. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1101–1118, 2015