Impact of side‐chain length on the phase structures of P3ATs and P3AT:PCBM films as revealed by SSNMR and FTIR

It is known that poly(3‐alkylthiophene) (P3AT) side‐chain length notably influences the photovoltaic performances of relating devices. However, comprehensively study on its impact on the structures of P3ATs and their blends with [6, 6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) is insufficient. By using solid‐state NMR and FTIR techniques, four P3ATs and their PCBM blends are investigated in this work, focusing on the phase structures as modulated by side‐chain length. Recently, we revealed multiple crystalline main‐chain packings of packing a and b together with a mesophase in poly(3‐butylthiophene) (P3BT) films (DOI: 10.1021/acs.macromol.6b01828). Here, the semicrystalline structures are investigated on poly(3‐hexylthiophene) (P3HT), poly(3‐octylthiophene) (P3OT), and poly(3‐dodecylthiophene) (P3DDT) with traditional form I modification, where packing a and the amorphous phase are probed. Furthermore, crystallized side chain within packing a is detected in both P3OT and P3DDT films, which shows a FTIR absorption at 806 cm⁻¹. Structural studies are also conducted on P3AT:PCBM blends. Compared with the pure P3ATs, the polymer crystallinities of the blends show reduction of about 40% for P3OT and P3DDT, whereas only about 10% for P3HT. Moreover, in P3BT:PCBM and P3HT:PCBM, the crystalline polymers and PCBM are phase separated, while in P3OT:PCBM and P3DDT:PCBM, blend components are mostly miscible. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 751–761     

Detrimental Ni(0) transfer in Kumada catalyst transfer polycondensation of benzo[2,1‐b:3,4‐b']dithiophene

This article deals with the Kumada Catalyst Transfer Polycondensation (KCTP) of 4,7‐dioctylbenzo[2,1‐b:3,4‐b']dithiophene ( BDP‐Oct ) using Ni(II) catalyst or In/cat combination. A combination of MALDI MS, GPC, and ³¹P NMR spectroscopy is used to reveal the failure of the KCTP of this particular monomer. Intermolecular transfer reactions to monomer appeared to prevent the formation of polymer. This result is remarkable, since isomeric benzo[1,2‐b:4,5‐b']dithiophene polymerizes in a controlled way. The presence of a “non‐aromatic double bond” in annulated monomers is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1706–1712     

Electrochemical sensors of heavy metals using novel polymer-modified glassy carbon electrodes

Electroanalytical determination of heavy metals using stripping voltammetry is commonly employed and has many advantages over other methods. The sensitivity of the technique is greatly improved by employing different modified electrodes. Seven novel polymer-modified glassy carbon electrodes have been developed in this investigation for the trace analysis of heavy metals such as zinc, cadmium, lead, arsenic, and copper in formulated samples of waters by square wave stripping voltammetry. Very good responses have been observed for all the metals, while all the modified electrodes employed. The poly(3,4-ethylenedioxythiophene)-modified electrode has resulted in very low limit of detection (LOD) value. Comparison is made between literature results of LOD and the results obtained in this study. An independent atomic absorption spectroscopic analysis of the industrial wastewater sample was carried out and the results compared. The suitability of the method for practical application was ascertained by applying the procedure for the wastewater from a plating industry.     

Study of Electrical Conductivity of Para-Toluene Sulfonic Acid Doped Polyaniline/Polyester-Based Polyurethane Blends in the S-Band Frequency Range

Conducting polymer blends were prepared using polyaniline doped with para- toluene sulfonic acid (PTSA-PANI) and a polyester polyol-based polyurethane (PU). The morphological, thermal and dielectric properties of the PTSA-PANI/PU blends in the frequency range of 1–5 GHz (S band) were investigated. It was found that the morphology of the samples was affected by the PTSA-PANI loading, resulting in the formation of agglomerates and pathways when above 10 wt%. The thermal stability of the composites was improved with increased PTSA-PANI loading. The electrical conductivity percolation threshold was obtained at 2.5% of PTSA-PANI loading and the electrical conductivity reached the value of 0.13 S/m at a PTSA-PANI loading of 30 wt%. The obtained results for the PTSA-PANI/PU blends prepared indicate a high potential for their successful use in electrical and electromagnetic applications.     

Multiple Mechanism of NCA Polymerization: Effect of N-Acetylglycine NCA and Related Additives

Polymerization of α-aminoisobutyric acid NCA by alkaline salts of various basicity as well as amines has been investigated. The study was focused on the effect on the initial polymerization rate of additives such as N-acetylglycine NCA and some other less electrophilic additives (l-acetyl-2-pyrrolidone, 3-acetyl-2-oxazolidone, 1-acetyl-3-methylhydantoin) which are all models of the growing chain end produced by the NCA anion pathway. The acetyl endgroup was detected by 250 MHz ¹H-NMR in all the polymers of α-aminoisobutyric acid NCA obtained in the presence of l-acetyl-3-methylhydantoin and triethyl amine or sodium methoxide initiators, whereas the additives influenced variously the kinetics of polymerization according to the nature of the initiator used. The results were interpreted in the light of a multiple mechanism supposing the simultaneous presence of the initiator anion, its conjugate acid, and NCA anion for basic salt initiation. Thus, the observed effect has to be considered as the sum of an elementary acceleration due to NCA anion and of an elementary deceleration due to the initiator anion. Predominance of the pathways involving NCA anion could be shown this way. This conclusion could be extended to γ-benxyl-L-glutamate NCA which is a more reactive NCA. However, the deceleration observed with some additives led us to believe that a nonnegligible participation of initiator anion during initiation cannot be excluded.     

Synthesis and Properties of Self‐doped Polyaniline with Polycationic Templates via Biocatalysis

The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4～pH 6 is around 10^?4 S/cm to 10^?6 S/cm.     

Synthesis,Characterization and Electrorheological Properties of Polyindene/Kaolinite Composites

In this study, synthesis, characterization and electrorheological (ER) properties of polyindene (PIN) and polyindene/kaolinite composites were carried out by cationic radical polymerization using FeCl₃ as the oxidizing agent. The homopolymer and composites, containing different amounts of PIN were characterized by FTIR spectroscopy, thermo‐gravimetric (TGA) analyses, scanning electron microscopy (SEM) and dynamic light scattering (DLS) methods. The conductivity and dielectric properties of PIN and PIN/kaolinite composites were determined. Suspensions of PIN and PIN/kaolinite composites were prepared in silicone oil (SO), at a series of concentrations (c=5–25 m/m %). The effects of concentration, shear rate, electric field strength, frequency, temperature and promoter on ER activities of suspensions were investigated.     

Electrically insulated molecular wires

This paper is an up-to-date mini-review based on literature data and own results regarding synthesis and properties of conducting (pseudo)rotaxane supramolecular structures. Conjugated polymers, such as polyarylene, polyheteroarylene, polyaniline, polyarylenevinylene or polyaryleneimine, were used as axle, while the macrocyclic components were cyclodextrins, cucurbiturils, cyclophanes or crown ethers. Properties of the supramolecular structure such as solubility, thermal or chemical stability, conductivity, etc. can be drastically modified by the inclusion of hydrophobic conjugated polymers inside the macrocycle, without any chemical modification. For instance, the photophysical properties (i.e. quantum yield of fluorescence and electroluminescence) of the supramolecular structures were enhanced when compared with uninsulated conjugated polymers. The doping process is also affected, because the access of a dopant to the conjugated chain is limited only to the uncovered domains of the conjugated chain.