Kunzeanones A, B, and C: novel alkylated phloroglucinol metabolites from Kunzea ambigua

Three new metabolites, kunzeanones A (1), B (2), and C (3), along with three known compounds, cryptostrobin (4), (+)-spathulenol (5), and (−)-globulol (6), were isolated from the non-polar fraction of the dried leaves of Kunzea ambigua (Myrtaceae), which shows ichthyotoxicity toward a small fish, medaka. The structures of these new compounds were elucidated as condensates of alkylated phloroglucinol with methylflavanone and germacrane-type sesquiterpene, respectively, on the basis of spectral analyses including 1-D and 2-D NMR spectra. The stereochemistries of kunzeanones A and B were determined by X-ray crystallographic analysis. A sesquiterpene, (+)-spathulenol (5), among the isolates was characterized as the ichthyotoxic principle of the extract.     

Spectroscopic and Quantum Mechanical Studies of Substituted Anilines and their Charge-Transfer Complexes with Iodine in Different Solvents

Summary. Equilibrium constants and molar extinction coefficients for 1:1 charge-transfer complexes between 2-hydroxyaniline (HA), 5-chloro-2-hydroxyaniline (CHA), and 4-bromo-2,6-dimethylaniline (BMA) as donors and iodine, as a typical σ-acceptor were determined spectrophotometrically in chloroform, dichloromethane, and carbontetrachloride solutions. Spectral characteristics and formation constants are discussed in terms of donor molecular structure and solvent polarity. The stoichiometry of the complexes was established to be 1:1. For this purpose, optical data were subjected to the form of the Rose-Drago equation for 1:1 equilibria. Electronic absorption spectra of the studied anilines were measured in different solvents. Spectral data were reported and band maxima were assigned to the appropriate molecular orbital transitions (π–π^* and n–π^* electronic transition). Solvent effects on the electronic transitions were discussed. Optimized geometry of the studied anilines was obtained at B3LYP/6-31 + G(d). The effect of the electronic factors of the substituents on the geometrical parameters of the ring has been explored. Geometrical values of the ring deviate from the regular hexagonal ring. Intramolecular H-bonds in HA and CHA have been computed at B3LYP/6-31 + G(d) and MP2/6-31 + G(d) levels. The H-bonding distance was calculated to be 2.105 ? in HA and 2.127 ? in CHA. Abstracted from her M.Sc. thesis     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

高能闪光照相中影响光程确定的几个因素

 利用闪光照相基本原理和成像原理，在直接记录法和转换屏记录法的情况下，研究了闪光照相中影响X射线在材料中光程确定的主要因素。结果表明，影响光程确定的几个因素是：散射效应、光源角分布效应、立体角效应和能谱效应。对于高能闪光照相，散射效应是影响光程确定的最主要因素，散射的存在使光程的测量值比实际值降低20%～40%。因此必须在做CT之前，对散射的影响进行修正。     

Ce∶KNSBN晶体中光扇效应的响应时间特性研究

以单束光入射Ce∶KNSBN晶体,系统研究了不同入射光波长下,Ce∶KNSBN晶体中光扇效应的响应时间随入射光强度及光入射角的变化情况.结果显示,相同的入射光强度及光入射角下,入射光波长较短时,光扇效应到达稳态的时间较短.相同的入射光强度下,随光入射角的增大,响应时间先减小后增大,但不同波长入射光下,最小值对应的光入射角不同,入射光波长为532 nm时,响应时间最小值对应的θ为15°;入射光波长为632.8 nm时,对应的θ为15.5°.同时研究发现,入射光强度逐渐增大的过程中,响应时间在逐渐减小.     

粉末压片-X荧光光谱法测定过磷酸钙中硫含量

硫是过磷酸钙中重要营养指标之一,为准确快速测定过磷酸钙中硫的含量,试验采用粉末压片-X荧光光谱法,将过磷酸钙试样充分干燥后研磨至粒度小于74 μm,采用硼酸镶边,在压力18 Mpa条件下保压30 s,制成样片。通过在过磷酸钙样品中添加不同质量的纯物质硫酸钙（质量分数范围1.52 %～17.21 %）,经过专用混匀设备混合均匀后,与试样压片相同条件下压制标准样片,作为过磷酸钙中硫的标准样品,建立硫标准曲线,曲线线性相关系数R2为0.9995,采用经验系数法校正干扰,建立了粉末压片-波长色散X射线荧光光谱法测定过磷酸钙中硫含量的方法, 方法检出限为0.002 %。对3个不同硫含量的过磷酸钙样品采用本实验方法重复测量7次,RSD在1.4 %~3.1 %,方法精密度性好,同时用高温燃烧红外光谱法和电感耦合等离子发射光谱法对比,三者测量结果相对极差小于2.0 %,测量结果无显著性差异。此方法不需要对样品进行熔融或溶解,样品制备简单,数据准确度和稳定性好,分析效率高,适合大批量样品中硫的测定。     

叠加压缩相干态的量子统计性质

研究了叠加压缩相干态的量子统计性质,给出了压缩和反聚束效应与叠加系数之间的关系。结果表明,叠加压缩相干态具有压缩和反聚束的现象。压缩奇偶相干态的有关结果均作为特例包含在本文的一般结论之中。     

考虑跟随企业搭便车行为的创新企业定价策略研究

文章通过构建博弈模型探讨了存在跟随企业搭便车行为时创新企业的定价策略及定价模式(稳定定价或动态定价),并分析了忠实消费者规模及需求溢出效应等特征对创新企业定价决策与利润的影响.结果表明,无论创新企业采用稳定定价或动态定价模式,跟随企业搭便车行为均会降低创新企业利润,需求溢出效应的增强总能使创新企业和跟随企业均获得更高的...     

Small World Effects in a Harmonious Unifying Hybrid Preferential Model Networks

Small world effects in the harmonious unifying hybrid preferential model (HUHPM) networks are studied both numerically and analytically. The idea and method of the HUHPM is applied to three typical examples of unweighted BA model, weighted BBV model, and the TDE model, so-called HUHPM-BA, HUHPM-BBV and HUHPM-TDE networks. Comparing the HUHPM with current typical models above, it is found that the HUHPM networks has the smallest average path length and the biggest average clustering coefficient. The results demonstrate that the HUHPM is more suitable not only for the un-weighted models but also for the weighted models.     

基于有限元模拟的超声应力系数标定及分析*

应力系数的标定作为超声应力检测最为关键的环节,直接决定应力检测结果的准确性。传统的应力系数试验标定对于被测物的表面粗糙度、耦合剂厚度、声匹配块与被测物接触力等因素十分敏感,但缺少基本参照值。基于COMSOL建立多物理场耦合的超声应力检测模型,施加不同的拉伸载荷,计算临界折射纵波到达时间与不同应力值之间的关系,模拟标定45#钢的超声应力系数为13.7MPa/ns。单轴水平拉伸试验标定的45#钢应力系数为16.5MPa/ns。结果表明,通过两种方法标定的应力系数较为接近,试验标定的应力系数偏大,这是由于有限元方法能够消除试验过程中各种不确定因素对声时精确测量所造成的影响,能够更加纯粹的反映材料的声弹性效应,因此具有作为基础数据的参考价值。有限元方法作为传统试验方法的补充,可以减小试验标定数据的离散性,提高超声应力检测结果的可信度。